FANTECH MK910 Modular Mechanical Keyboard Instruction Manual

: June 9, 2024
: fantech

Table of Contents

MK910 Modular Mechanical Keyboard
Instruction manual
Technical specification
Secondary functions
How to use f
How to connect g
Software h
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MAXFIT81 FROST WIRELESS MODULAR MECHANICAL

USER Manual

MK910 Modular Mechanical Keyboard

What’s included in the box

FANTECH MAXFIT81 FROST WIRELESS Mechanical Keyboard
Switch Puller
Keycaps Puller
Detachable Type-C Cable
User Manual

System requirements

Operating systems: Windows XP/7/8/10/11; MAC OS (Software only works with windows)
One USB 2.0/3.0 port

Instruction manual

Thank you for purchasing FANTECH MAXFIT81 MK910 Mechanical Keyboard.
MAXFIT81 features hotswappable sockets which are compatible with Cherry, Gateron, Kailh and other switches, as well as featuring a premium macro knob for easy control
of your PC. The exploded layout design allows for easy typing, MAXFIT81 also features interactive OLED , as well as BT5.0 + 2.4Ghz + USB connection modes.
Get your game on with MAXFIT81!

Technical specification

Number of keys: 81keys
Switch type: Mechanical
Anti-Ghosting: All keys
Connection: Wired, 2.4GHz, BT5.0 (Up to 5 devices)
Battery Capacity: 4000mAh
Battery Life: 165 hours with RGB OFF 40 hours with RGB ON
Wireless Distance: Up to 10m
Size: 303.2(L)x104.3(W)x45(H)mm
Weight: 1018gr

Size

Secondary functions

Combination Keys	Windows	Mac
Fn+Esc	“old 3 seconds, to reset keyboard	Hold 3 seconds. to reset keyboard
Fn+F 1	Brightness-	Brightness+
Fn+F2	Brightness+	Brightness+
Fn+F3	Task view	Desktop Switch
Fn+F4	Fie Explorer	Call ‘SW`
Fn+F5	Mail	——

Notes: Cycle OLED allows for functions such as CPU status, Disk Status, Memory Status and more to be shown. For this, the keyboard must be connected to the software.

How to use f

Change switches and keycaps

Remove keycap
Use the keycap puller tool to clamp on a keycap and pull upwards to detach keycap from switch. Sometimes the switch may come out as well if the keycap is secured tightly on switch, which is normal. For longer keys such as the space bar, always clamp and remove from the MIDDLE of the keycap.
Remove switch
Use the switch puller to push in the two tabs located on the top and bottom side of the switch. Once they are pushed in, pull upwards to remove switch from keyboard case. Warning: It is very easy to scratch your keyboard case with this tool, so take caution when removing switches!
Insert switch
When inserting a new switch, align switch to holes on the keyboard, and insert straight down. There should be minimal resistance and the switch should pop into the frame of the keyboard. It is recommended at this time to have a Notepad ready on your PC, open it and make sure the switch works when you press it. If the switch does not light up, or the key doesn’t show up on your PC when you press it, then the switch was not inserted properly. Remove switch, and make sure pins are straight then insert again.

Note: It is safe to swap switches while your keyboard is plugged in to your PC 4. Insert keycap
Once you have confirmed the switch was properly inserted, snap back in the appropriate keycap.

How to connect g

Plug in the Type-C cable to the keyboard, then connect the keyboard to computer by inserting USB jack to your computer USB port. Press FN+5 3s to activate wired mode,
after it connects the OLED will notify the keyboard is connected.

2.4Ghz mode:
Plug in the USB receiver to the computer USB port. Press FN+4 to activate 2.4Ghz mode, after it connects, the OLED will notify the keyboard is connected. If it doesn’t
connect, please hold FN+4 for 5 seconds to enter 2.4Ghz pairing mode.
BT mode: Maxfit81 Frost Wireless can connect up to 3 BT
devices simultaneously via combination key, connect the BT by hold FN+1 / FN+2/ FN+3 for 5 seconds. Then, navigate to your devices BT settings, and begin the pairing process. In pairing process the OLED will notify your keyboard still in pairing, After connected the OLED will notify the keyboard is connected.
Download our Manual / Software from our official website www.fantechworld.com

Software h

Main

On the main screen, you can customize the keyboard’s keys and set macros, by clicking on the keys. You also can customize the FN layers.
You can customize another layer of macro by turning on Fn Layer features.
1. Set or record the combination keys for the selected keys.
2. To activate the keys by pressing Fn + selected keys.

Lighting
On this screen, you can customize up to 22 lighting modes, and even set the speed and brightness on some.

In this section, you can customize the OLED display by opening the sketchpad mode.

Set your display in the sketchpad frame section.
If you have any pictures that you already download from the web, you can import them by pressing “select picture”
After finishing setting your display, you can edit the frame, after finishing editing you can upload the design in the upload file section.

*Note: – Picture format needs to be JPEG, PNG, GIF – If you found out the date and time on the
OLED is not correct, please press “Adjust screen time” button to fix the date and time.

In this section, you can customize the sleep and light ON time of your keyboard when you are away from your computer.

Macro
To set up a new macro, click the “add” icon on the Macro bar, to start the macro customization.
Next, click the “Start” button, which will begin the macro input process. When finished, click the “Stop” button.
To save your new macro, click the “save” button after stopping the macro input.
After recording the macro, you can easily edit it by clicking the input step of the macro. To do this, you can click on “add” to add more steps, or “Modify” to modify the key.
After setting up the macro, return to the Main screen and click on a key to apply a macro to it.
Loop
You can set the macro looping number
Button control On/Off
Auto looping start once keys was pressed and end when the keys was pressed again.
Touch repeat
Auto looping start upon holding and pressing the keys, it will end once you let go the key press