Arris Router Login Instructions
- October 29, 2023
- Arris
Table of Contents
****
Arris Router Login Instructions
How To Login to an Arris Router And Access The Setup Page
The Arris router web interface is the control panel for your router it’s where
all the settings are stored and changed. To make changes to your network
you’ll need to log in to your Arris router.
Requirements to access the Arris web interface
Accessing the Arris web interface is pretty straightforward and all you’ll
need is:
- Arris router access to the network,
- Either through LAN cable or through
- Wi-FiA web browser, which you clearly have.
Following are the instructions to connect to your Arris router’s interface for configuration and diagnostics.
Make sure you are connected to your Arris router
To be able to reach the setup pages of your Arris router, you’ll need to be connected to its network. So start by connecting to the network, either through WiFi or through an ethernet cable. Tip: If you don’t know the WiFi password for your Arris router, you can always connect to it with an ethernet cable, which won’t require a password.
Open your web browser and navigate to 192.168.0.1
Open your browser and type the router’s IP address into the address field. The
most common IP for Arris routers is: 192.168.0.1 If that IP address doesn’t
work, you can search the default Arris IP address list for your specific
model.
Tip: Since you’re already connected to your Arris router, you can also
use whatsmyrouterip.com to quickly find the IP.
It is the “Router Private IP”-value.
Enter the username and password for your Arris routers in the username and password field, enter your current username and password, and press enter/sign in.
Default login credentials for Arris
If you’re not sure about the username/password you can look at the default
Arris credentials to see what the defaults are, and how to reset them.- The
credentials can also be printed on the label on the back of your router.
How to configure your Arris router
Once you have logged in to the Arris admin interface you should be able to
change any settings that are available. Be careful when you configure your
router so that you don’t break the network.
Tip: write down your current settings before changing anything so that
you can revert it in case of trouble.
What if my Arris router or network stops working after a configuration
change
In case you by mistake make some change that breaks your Arris home network,
you can always go back to zero by following the generic 30 30 30 hard reset
trick. This is usually the last resort, and if you still have access to the
Arris interface you can always log in to try and revert the settings first
(This of course assumes you wrote down the original value before changing it).
REFERENCE LINK
https://www.router-reset.com/howto-login-Arris-router-and-access-settings