Molnija ACHS-1 Chelyabinsk Watch Instructions

Molnija ACHS-1 Chelyabinsk Watch

Product Information

Technical Specifications

• Case diameter: 44 mm
• Case material: Steel 316L
• Strap width: 22 mm
• Type of glass: Sapphire crystal
• Movement mechanism: Miyota 8215 auto-winding movement, 21 jewels
• Function: Date, Stop second
• Accuracy: -20 to +40 seconds per day
• Power reserve: 42 hours
• Water Resistance: 10 ATM

Product Usage Instructions

Setting the Time
Pull the winding crown out into position III. Turn the winding crown counterclockwise to set the current time. Push the winding crown back into its original position. The second hand will start moving.

Setting the Current Date
Pull the winding crown out into position II. Turn the winding crown counterclockwise to set the current date. Push the winding crown back into its original position. Do not set the date between 21.00 and 01.00 to avoid damaging the watch movement.

Winding

• Automatic Winding: Constant arm movements cause the rotor to pivot, activating the self-winding mechanism.
• Manual Winding: When using the watch for the first time or after a long period of non-use, wind the watch 8-10 times by rotating the winding crown clockwise. Subsequently, rotate the crown 40 times to fully wind the watch manually. The power reserve is approximately 42 hours.

Care and Storage

• Water Resistance: The watch is water resistant to 10 ATM. It can withstand splashes, rain, hand washing, swimming, and brief submersion in water but is not suitable for scuba diving.
• Care: Clean the watch regularly (excluding the leather strap) with a soft cloth moistened with warm soapy water.

Warranty Information
The warranty applies only to products purchased from authorized sales outlets and serviced by authorized service centres. Unauthorized repairs or interference with the watch voids the warranty.

FAQ

• What is the water resistance rating of the watch?
  The AChS-1 Version 5.1 is water resistant to 10 ATM, making it suitable for activities like swimming and hand washing.

• How should I care for my watch?
  We recommend regular cleaning with a soft cloth moistened with warm soapy water, excluding the leather strap.

Overview

1. hour hand
2. minute hand
3. second hand
4. three-position winding crown
   • I – neutral position
   • II – position 2
   • III – position 3

DESCRIPTION, DISPLAYS AND FUNCTIONS

The AChS – 1 5.1 wristwatch is a timepiece with an automatic winding mechanism.

1. SETTING THE TIME

   • Pull the winding crown out into position III.
   • Turn the winding crown counterclockwise to set the current time. Push the winding crown back into its original position. The second hand will start moving.

2. SETTING THE CURRENT DATE

   • Pull the winding crown out into position II.
   • Turn the winding crown counterclockwise to set the current date. Push the winding crown back into its original position.
     Do not set the date between 21.00 and 01.00. This could damage the watch movement.

3. WINDING

   • Automatic winding
     Constant arm movements cause the rotor to pivot, activating the self-winding mechanism.

   • Manual winding

   • When using the watch for the first time or if it has not been worn for a long period, the watch should be wound 8-10 times by rotating the winding crown clockwise.

   • During subsequent use, the winding crown should be rotated 40 times to fully wind the watch manually.

   • The power reserve is approximately 42 hours.

INSTRUCTIONS FOR USE, CARE AND STORAGE

The AChS-1 5.1 wristwatch features an automatic winding watch movement.

1. WATER RESISTANCE

   • The AChS-1 Version 5.1 is water resistant to 10 ATM, a standard measurement which means the watch can withstand a pressure of 10 atmospheres.
   • These watches are resistant to splashes and rain, and you can wash your hands wearing the watch. You can swim while wearing the watch and it can be submerged in water. However, these watches are not suitable for scuba diving.

2. CARE
   We recommend that you clean your watch regularly (apart from the leather strap) with a soft cloth moistened with warm soapy water.

3. PRECAUTIONS

   • Never attempt to open the case or remove the back cover yourself.
   • The rubber seals protecting the watch from water and dust are to be replaced every 2-3 years.
   • If any moisture gets inside the watch, immediately have its condition checked by an authorized service centre.
   • Do not expose the watch to extreme temperatures.
   • Do not handle the watch roughly (shocks, drops etc.).
   • Do not fasten the strap too tight. There should be a finger-wide gap between the wrist and the strap.
   • The watch should be stored in a dry place.
   • Keep the watch away from gasoline, cleaning solvents, aerosols from sprayers, adhesives, paints, etc. Chemical reactions caused by these materials can damage the seals, the case and finish of the watch.
   • The sapphire crystal is strong, but it may crack if the watch falls or receives a shock.
   • Avoid storing your watch with jewellery containing diamonds, as these can damage the sapphire crystal.
   • Store your watch in a separate, preferably specially designed case, lined with a soft protective material.

TECHNICAL SPECIFICATIONS

• Case diameter 44 mm
• Case material Steel 316L
• Strap width 22 mm
• Type of glass Sapphire crystal
• Movement mechanism Miyota 8215 auto-winding movement, 21 jewels
• Function Date, Stop second
• Accuracy -20 … +40 seconds per day
• Power reserve 42 hours
• WR 10 АТМ

WARRANTY CONDITIONS

Per Resolution of the Government of the Russian Federation of 27.05.2016 No. 471 On Amendments to Certain Acts of the Government of the Russian Federation on the Return or Exchange of Technically Complex Goods, this product belongs to the category of technically complex goods, which are not subject to the requirement of the buyer to provide him or her with a similar item free of charge for the period of repair or replacement, and which are not subject to return or exchange for a similar item of a different size, shape, size, shape, style, colour or configuration.

The warranty only applies to products purchased from authorized sales outlets.

The manufacturer’s warranty is 1 (one) year from the date of the product’s sale. The warranty covers defects and errors in the assembly materials. In the event of a fault within the warranty period, the manufacturer undertakes to eliminate any faults or malfunctions free of charge. If the repair fails to return the watch to its previous quality, the manufacturer guarantees that it will replace the watch with another of the same model or a model with identical characteristics. Repairs should only be carried out in authorized service centres. The contacts of authorized service centres are provided by an authorized sales representative.

EXCEPTIONS

The warranty does not cover:

• the glass and strap;
• defects in the watch caused by its use (e.g. scratches on the glass, changes in colour and/or material of non-metallic belts and bracelets, etc.);
• any damage to any part of the watch caused by misuse, neglect, or carelessness (shock, potholes, dents, cracks, etc.);
• any unauthorized repair or unauthorized interference with the watch’s interior and/or exterior means that the warranty is automatically no longer valid.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>