KoolMore KM-ICD-26SD Ice Cream Dipping Cabinet User Manual
- June 4, 2024
- KoolMore
Table of Contents
KoolMore KM-ICD-26SD Ice Cream Dipping Cabinet
Defrosting the Freezer
For optimal performance defrost the freezer when the ice buildup around the freezer walls reaches 1⁄4”.
-
Lower the freezer temperature to the lowest number on the controller for 6 hours.
-
Remove all product from the freezer.
-
Power the freezer off
-
Remove Ice buildup from the freezer walls.
-
Do not use sharp metal tools such as steel brush to clean the ice buildup so as to avoid damage.
-
Dry the freezer walls with a clean cloth
-
When defrosting has finished drain the water in the bottom of the freezer by removing the cap, as illustrated below.
-
There is a water conduit at the bottom of the freezer, when defrosting, extract the rubber cover, the defrosted water will drip into the hole and flow out.
-
Plug the freezer in
-
Wait until unit reaches proper temperature before returning product to the freezer.
NOTES: PLEASE KEEP THE RUBBER COVER SAFE DURING THE DEFROSTING AND PUT IT BACK AFTER THE DEFROSTING IS COMPLETE.
Temperature Control
This freezer’s temperature control is tamper-proof, preventing accidental adjustment and ensuring that the quality of your frozen treats won’t be compromised. The temperature control can be adjusted easily with a screwdriver when necessary.
- To adjust the temperature turn the knob clockwise. The higher the number the lower the temperature. Generally, position ‘4’ is suitable to maintain frozen products.
- “Max’ position will be operating not continually as compressor won’t stop (no cycle). Turn the temperature control to the “4” or “5” when temperature inside is stable for ice cream and similar products.
Maintenance
- The freezer should be cleaned regularly. When cleaning, turn off the power, remove the product and clean the inside using water or a little neutral detergent.
- Do not use boiling water, acid, chemical diluents, petrol and oil, or dirt-removing powder.
- Dry it after cleaning.
- Use light soap water when cleaning the door seal, apply a little of talcum powder on it after natural drying to extend its service life.
- Use soft cloth with water or a little detergent to clean the out surface. Note, keep the power supply away from water.
Troubleshooting
The following are not issues but are to be expected as normal operation of your freezer:
- The sound of water flowing during operation is normal; this is the refrigerant.
- When the humidity is high, dew may form on the surface of the freezer.
- When the freezer is running, the condenser and compressor will be hot.
Dimensions
Dipping Cabinet Dimensions:
Dipping Cabinet + Sneeze Guard Dimensions:
Limited Service Warranty
Valid only in the United States
1 Year Parts and Labor Warranty
Unless otherwise stated, Koolmore Supply Inc. warrants to the original
purchaser of new Koolmore dipping cabinet (and all parts thereof), that such
equipment will be free from defects in material and workmanship for a period
of 1 year from the date of delivery. Valid only in the Continental United
States.
Coverage Limitations
The 1 year parts and labor warranty do not cover:
KOOLMORE Supply Inc. will not warrant coverage for component failure or other
damages that arise under the following conditions:
-
Failure to install and/or use the equipment within proper operating conditions specified by Koolmore. This includes but is not limited to
residential, outdoor, or mobile applications. -
Any adjustments necessitated by improper operating conditions.
-
Damage caused by improper electrical connection, power failure, or generators.
-
Failure to properly maintain the unit including all preventive maintenance and cleaning.
-
Equipment sold or used outside of United States, equipment purchased second-hand, equipment sold by an unauthorized reseller, and
equipment expressly sold without warranty coverage. -
Equipment without a valid serial number and proof of purchase, or other way to verify warranty coverage.
-
Equipment that has not been used appropriately or was subject to misuse, neglect, abuse, accident, alteration, negligence, damage during
transit, delivery or installation, fire, flood, or an act of God. -
Equipment that has been altered, modified, or repaired by anyone other than an authorized service agency outside of preventative
maintenance and cleaning. -
Any damage that occurs as a result of negligence or improper handling.
-
Parts deemed by Koolmore to be normal wear and tear parts, including hoses and select plastic or rubber components
Additionally, no claims can be made against this warranty for spoilage of products, loss of sales or profits, or any other consequential damages.
For Warranty Inquiries or Service:
This warranty is only valid on equipment purchased from an authorized dealer.
Locate the model number.
Next, call 1-718-576-6342. You must
have the model number when contacting service technicians.
Failure to contact Koolmore prior to obtaining equipment service may void your
warrant
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>