bimar VTM35 Table Fan Instruction Manual

bimar VTM35 Table Fan

Product Information

The product is a table fan with the model name VTM35 (mod. FT-30MB). It comes with a front grille/protective screen, a fan, a motor shaft, a rear grille, screws for fixing the grilles, a body, an oscillation button, a selector, a cord, and friction screws for tilt adjustment. The product is intended for use in homes, offices, hotels, and other similar places. The product manual contains safety instructions that must be followed to prevent electric shock, physical injury, or fire hazards. The manual also advises users to contact the manufacturer for technical assistance.

Product Usage Instructions

1. Before using the product, read the instruction manual carefully and keep it for future reference. Contact the manufacturer if you have any doubts or questions about the product.
2. Keep the product out of the reach of children.
3. Ensure that the fan is functioning correctly before use. If it is not working correctly, turn off the power and contact a qualified technician for assistance.
4. Do not insert any objects or fingers into the protective grille of the fan.
5. Do not move the product while it is in operation. Always unplug the product before assembly, disassembly, or cleaning.
6. Avoid exposing the product to weather elements such as rain or sunlight.
7. Do not touch the product with wet hands or feet.
8. Do not pull the cord to move the product. Use the handle provided.
9. If there is a malfunction or operational issue with the product, turn off the power and seek assistance from a qualified technician. Do not attempt to repair the product yourself.
10. Ensure that the fan is disconnected from the power supply before removing the protective screen.
11. Follow the assembly instructions provided in the manual to fix the rear grille with the screws provided.

Please read these instructions carefully before using the appliance, and instruct other persons using it, too, when necessary. Keep booklet Hndy for further use.
If when reading this instructions manual certain parts should remain difficult to understand, or if there is any confusion, contact the company indicated on the last page before using the product.
This symbol highlights instructions and precautions for safe use. Warnings and appliance installation, use, cleaning and maintenance procedures may be updated slightly from those described in this manual; for further details, please consult the updated on-line manual at www.bimaritaly.it.

GENERAL NOTICES

• This device is intended for home use only, to ventilate rooms, and in the manner described in this manual: do not use it for any other purpose. Any other use is to be considered inappropriate and therefore dangerous. The manufacturer cannot be held responsible for eventual damage caused by inappropriate, improper or irresponsible use and/or for repairs made to the product by unauthorised personnel.
  This appliance is intended to be used in household and similar applications such as:

  • staff kitchen in shops, offices and other working environments;
  • farm houses
  • by clients in hotels, motels and other residential type environments
  • bed and breakfast type environments

• Do not touch the appliance with wet hands or feet.

• Do not insert any tool, or your fingers, into the grille protecting the blades.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• The appliance must be kept out of children’s reach.

• Attention: when using electric appliances, the basic safety precautions must always be observed to avoid risks of fire, electric shocks and physical injury.

• Do not use the appliance if it is not operating correctly or seems damaged; if in doubt, contact professionally qualified personnel.

• Make sure that the appliance is working correctly: if not, turn the appliance off and have it checked by professionally qualified personnel.

• Do not move the appliance when it is operating.

• Unplug the appliance when not in use.

• Do not use the device at room temperatures above 40 °C.

• Do not move the appliance when it is in function.

• Do not leave the device exposed to the weather (sun, rain, etc.).

• Do not pull on the cord to disconnect the plug from the socket.

• Do not allow children, or irresponsible persons, to use the device without supervision.

• If the electric cord is damaged, it has to be replaced by the supplier or an authorized service center or a professionally qualified, to avoid any risks.

• Do not use the appliance with a timer or a programmer or with a system that can switch on the appliance automatically, to avoid risk of fire, since a fire risk exists if the heater is covered or positioned incorrectly.

• In the event of a breakdown or poor operation, turn the fan heater off and ask for professionally qualified help.

• Ensure that the fan is switched off from the supply mains before removing the guard.

INSTALLATION

• After removing the packing materials, check the integrity of the heater; if you are unsure, do not use it and ask for qualified professional help. The packing materials (plastic bags, polystyrene foam, nails, etc.) must be kept out the reach of children because they are potential sources of danger. All packaging elements must be disposed of according to their raw material (see the symbol stamped on each one) and according to the provisions of their municipality. The bag, which is unmarked due to its small size, therefore you have to follow the procedures for the disposal of their municipality. Attention: any stickers or advertising material applied to the grid removed before using the appliance. The manufacturer declines all responsibility in case this is not safe working practices will be respected.
• Before connecting the appliance, check that the voltage shown on the data plate matches that of your electricity, and that the electric plug is grounded. In the event of incompatibility between the electric outlet and the plug of the appliance, have the outlet replaced with another more suitable type by professionally qualified personnel, who will make sure that the section of the wires of the outlet is appropriate for the absorbed power of the heater. In general, the use of adapters or extension cords is not recommended; if their use is indispensable, they must conform to existing safety standards and their current capacity (amperes) must not be less that the maximum of the heater.
• The power socket must be easy to reach so the plug can be removed quickly in case of emergency.
• Do not place the fan on a shelf and/or near sinks or other container of liquids (minimum distance of 2 meters) to avoid the risk of it falling in.
• Keep the fan far away from fabrics (curtains, etc.) or unstable materials that could obstruct the air intake grille; make sure that the front is free of unstable materials (dust, etc.).
• Make sure that the electric cord is not touching rough, hot or moving surfaces and not twisted or wrapped around the appliance.
• Stand the appliance on a horizontal, flat surface or table; do not stand on a inclined plane (the appliance could upset).
• Do not place the appliance near an open flame, cooking or other heating appliance.

ASSEMBLY

Attention: the fan can be used only when completely and correctly assembled, that is complete with its base and protection grid. If in doubt, have the appliance checked or assembled by a qualified professional person.
Attention: always unplug the appliance before you assemble.

1. Front grill/protective screen
2. Fan
3. Fan fixing screw
4. Rear grill fixing screws
5. Rear grill
6. Motor shaft
7. Oscillation button
8. Housing
9. Clutch screw (tilt up/down)
10. Switch
11. Cord
12. Screw with nut

• Insert the rear grid (5) onto the motor shaft, so that the handle is at the top (like in the figure to the side), securing it using the 4 screws provided (4.)
• Insert fan (2) onto the motor shaft (6) and attach it so that the screw (3) touches the milling formed on the motor shaft (like in the figure), (at the end of the work, check that the fan is correctly secured).
• Couple the front grid (1) with the rear grid (5) and lock with the retention hooks. For safety reasons, you must ensure the fastening with the appropriate locking screw (12) in the holes provided on the edge of the grid, (the screw holes must be in the lower part).

USE

Before each use, verify that the unit is in good condition, the electric cord is not damaged, if the power cord is damaged, it must be replaced by the manufacturer or a competent qualified electrician or a person with similar qualifications, in order to avoid any risk.
Insert the plug of the fan in the power supply.
Ventilation: select the desired speed by turning the switch to one of the following positions: I– Minimum speed I I–Medium speed I I I–Maximum speed
To turn off, turn the switch to position 0 and then remove the plug from the socket. Horizontal oscillation (right-left): this is selected with the button located on the motor body. To stop the motion and keep the ventilator still, press the button.
Vertical inclination (high-low) : it is regulated by gripping the motor body and orienting it in the direction desired; tighten the screw (9) to lock the motor housing in the desired position. When not in use for long periods, the plug must always be removed from the socket.

CLEANING AND MAINTENANCE

Attention: before normal cleaning, remove the plug from the socket.

• Clean the body with soft, slightly damp, cloth; do not use abrasive or corrosive products.
• Do not immerse any part of the fan in water or other liquid: if this should happen, do not put your hand in the liquid, but first remove the plug from the socket. Carefully dry the appliance and make sure that all the electrical parts are dry: in the case of doubt, ask for professionally qualified help.
• It is essential that the motor’s air holes be kept from dust and lint.
• Periodically check the electric cord for damage; its replacement requires a special tool: contact an authorized service center, also for any repairs.
• If the fan will not be used for long periods, it must be protected from dust and humidity; we recommend storing it in its original packaging.
• Should you decide not to use the appliance any more, we recommend making it inoperative by cutting the power cord (after making sure you have disconnected the plug from the socket) and make dangerous parts harmless if children are allowed to play with them (such as the blade).

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2011/65/EC.
At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out

Information requirements

GUARANTEE:

it is advised to register the appliance on the website https://www.bimaritaly.it/it/garanzia
or to scan the QR code on the side to properly register the warranty (fill out the form to acivate the warranty on the product you purchased).
General guarantee terms
Guarantee coverage starts from the moment of purchase of the appliance as indicated by a fiscally mandatory delivery document (bill or tax receipt or shipping document). Guarantee coverage lasts 24 months and terminates after the prescribed term.Guarantee coverage covers all replacements or repairs that become necessary due to defects in material or manufacture.Guarantee coverage does not cover all those parts which become defective due to failure to comply with installation, operating or maintenance instructions, shipping damage, operating neglect or negligence, improper use or any circumstances which are not due to manufacturing defects of the appliance. Guarantee coverage is also excluded for replacement or repair of all parts subject to fair wear and tear or to expiry, as well as removable parts, light bulbs, glass components, ceramic parts, external tubes, batteries and disposable (throw-away) accessories. Replacements or repairs that come under guarantee coverage are performed free of charge for goods delivered free the Manufacturer’s factory or to one of our Technical Service Centres. The Customer must only pay for shipping costs.Guarantee coverage is not granted if repairs are performed by personnel not belonging to authorized Technical Service Centres or when non- genuine spare parts are used.This warranty is governed by and construed in accordance with applicable laws in force in the country where the product is purchased. For details, contact the Customer Support in your country or  the Bimar website. (www.bimaritaly.it).The Manufacturer declines all responsibility for any direct or indirect harm to persons, pets or property consequent to failure to comply with all the provisions specified in the appliance instruction booklet and especially those regarding appliance maintenance, operation, installation or warnings.
Via G.Amendola, 16/18 25019 Sirmione (BS) – ITALY
www.bimaritaly.it
Assistenza.privati@bimaritaly.it

References

• Small Bimar appliances. Quality and Design.
• Small Bimar appliances. Quality and Design.
• Small Bimar appliances. Quality and Design.
• Garanzia | Bimar S.r.l.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>