FRIGIDAIRE FHWC054WB1 Window Room Air Conditioner Owner’s Manual

FRIGIDAIRE FHWC054WB1 Window Room Air Conditioner

Product Information

Room Air Conditioner

The Room Air Conditioner is a cooling device designed to regulate the temperature of a single room. It comes with features such as a timer, fan speed adjustment, and sleep mode for convenience. The device also has a reserved space for the PureAirTM Premium Allergen Filter (sold separately), which captures household dust, dust mite debris, pet hair, dander, smoke, and other fine particles.

Product Usage Instructions

1. Before starting, make sure to install the unit according to the supplied Installation Instructions. When plugging in the unit, always press the RESET button on the Current Device.

2. To get started, press the On/Off button. The unit is programmed to start in Eco mode with auto temperature setting. Press the – or + button to adjust the temperature setting.

3. To change the display temperature unit, press and hold the – and + buttons together for 3 seconds.

4. After 250 hours of use, the Dust Filter light will illuminate to remind you to clean the dust filter. Press and hold the Fan button for 5 seconds to turn off the light.

5. If the PureAirTM Premium Allergen Filter (sold separately) is installed, the PureAirTM Filter light will illuminate white. After 1440 hours of use, the light will illuminate red to remind you to replace the filter. Press the Sleep button for 5 seconds to reset the light.

6. To activate Child Lock, press and hold the Mode button for 3 seconds. In the Child Lock state, the control panel will be locked.
   Press the Mode button for another 3 seconds to deactivate.

7. To set the timer, press the Timer button. Then enter up to 24 hours for automatic turn on or shut off. When the unit is On, the value entered is the time that the unit will shut off. When the unit is Off, the value entered is the time that the unit will turn on. Press and hold the Timer button for 2 seconds to cancel the timer setting.

8. To change the mode, press the Mode button to choose the desired mode. You may also select Auto Fan, which will speed up or slow down fan speeds automatically based on significant changes in room temperature.

9. To adjust fan speed, press the Fan button to increase fan speed.

10. To go to Sleep mode, press the Sleep button. The temperature holds this elevated setting for 7 hours.

For more information, refer to the Use & Care Guide provided with the device.

Before you start
Only install unit according to the supplied Installation Instructions.
When plugging unit in, always press the RESET button on the Current Device.

You’re in control

1. To Get Started
   Press On/Off button. That’s it!
   The unit is programmed to start in Eco mode, with auto fan speed and a temperature setting of 72°F. To change the temperature setting press – or + button.
   In Eco mode (Energy Saver mode), cooling will turn off once the set temperature is reached. Every 10 minutes fan will run so room temperature can be sensed.

2. To Change Mode
   Press Mode button to choose the desired mode.

3. To Adjust Fan Speed
   Press Fan button to increase fan speed.
   You may also select Auto Fan, which will speed up or slow down fan speeds automatically based on significant changes in room temperature.

4. To Go to Sleep
   Press the sleep button. Temperature increases 4°F or 2°C over 1 hour and then holds this elevated setting for 7 hours.

5. To Activate Child Lock
   Press and hold the Mode button for 3 seconds. In the Child Lock state, the control panel will be locked. Press the Mode button for another 3 seconds to deactivate.

6. To Set the Timer
   Press the Timer button. Then enter up to 24 hours for automatic turn on or shut off. When unit is On, the value entered is the time that the unit will shut off. When unit is Off, the value entered is the time that the unit will turn on. Press and hold the Timer button for 2 seconds to cancel the timer setting.

7. To Change Temperature Unit
   Press and hold the – and + buttons together for 3 seconds to change the display temperature unit between °F and °C.

8. To Clean the Dust Filter
   After 250 hours of use the Dust Filter light will illuminate to remind you to clean dust filter. Press and hold the “Fan” button 5 seconds and the light will go off.

9. PureAirTM Premium Allergen Filter (sold separately)
   If the PureAirTM Premium Allergen Filter is installed, the PureAirTM Filter light will illuminate white. After 1440 hours of use the light will illuminate red to remind you to replace a new Filter. Press Sleep button for 5 seconds to reset light.

Upgrade your AC with a PureAirTM Premium Allergen Filter

Your air conditioner has a reserved space for PureAirTM Premium Allergen Filter (sold separately). Enjoy fresher room air with the PureAirTM Filter that captures household dust, dust mite debris, pet hair, dander, smoke, and other fine particles.

Remember
Your Use & Care Guide has complete descriptions of all these features and more. Please read it carefully and keep in a safe place.

Scan the QR Code to the right or visit frigidaire.com frigidaire.ca for owner support

References

• Kitchen, Laundry, Home Appliances & Accessories | Frigidaire
• Frigidaire

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>