NETGEAR (EAX20) WiFi 6 Mesh Range Extender-Instruction Guide
- June 4, 2024
- NETGEAR
Table of Contents
NETGEAR (EAX20) WiFi 6 Mesh Range Extender
Specifications
-
Package Dimensions
14.92 x 12.4 x 4.61 inches -
Item Weight
1.1 pounds -
Range
1500 Square Feet -
WiFi Technology
802.11ax -
WiFi Band
Band 1: 0.6Gbps @2.4GHz – 1024QAM -
Brand
Netgear
Introduction
This used or refurbished item has undergone professional inspection and testing to ensure that it functions and seems brand new. How a product is added to Amazon Renewed, your source for previously owned, reconditioned goods: A buyer purchases a brand-new item and exchanges it for a newer or different model. Suppliers approved by Amazon check and test the goods to ensure it functions properly and appears brand new. The item is then offered for sale on Amazon as an Amazon Refurbished item. Products that have been renewed by Amazon are eligible for replacement or refund if you’re unsatisfied with your purchase.
What’s In the Box?
- WiFi Range Extender (EAX20)
- Installation guide
Overview
- WPS Button
- Reset Button
- Ethernet Ports
- Power Connector
- Ethernet LED
- 5 GHz WiFi LED
- – 2.4 GHz WiFi LED
- Router Link LED
- WPS LED
- Power LED
How the Extender Works
The extender works like a bridge between a WiFi router (or a WiFi access point) and a WiFi device outside the range of the WiFi router. The extender performs two main jobs
- The extender connects to a working WiFi network. When the extender connects over WiFi to an existing network, it functions as a network client, similar to how a WiFi device connects to a network.
- The extender acts as an access point for WiFi devices. The extender broadcasts its own WiFi network that WiFi devices can join. In its role
as an access point, the extender performs tasks that WiFi routers do, such as broadcasting its network name (SSID).
The extender must do each of these jobs so that both ends of the bridge are in place.
Install the WiFi extender
Place the extender, apply power, and connect the extender to your existing WiFi network.
Place the extender and apply power
To place the extender and apply power
- Place your extender in the same room as your WiFi router. Proximity to the WiFi router is required only during the initial setup process.
- Plug the extender into an electrical outlet.
- Wait for the Power LED to light solid white.
Connect to an existing WiFi network
To extend the range of your WiFi network, you must connect the extender to your existing router’s WiFi network.
Note
If your router’s WiFi security is set to WPA enterprise, WPA2 enterprise,
or WEP, your extender can’t connect to your router. You must change your
router’s WiFi security setting.
You can connect your extender to your router’s WiFi network using one of these methods
-
Connect with the Nighthawk app
The Nighthawk app guides you through the connection process. For more information, see Connect with the Nighthawk app . -
Connect with WPS. If your router supports Fi Protected Setup (WPS), use WPS to connect your extender to your router’s WiFi network.
For more information, see Connect with WPS. -
Connect with the web browser setup. You can use the extender’s web browser setup, called the NETGEAR installation assistant. and For more information, see Connect with the NETGEAR installation assistant.
Quick Start
-
Download the Nighthawk app
On your mobile phone, download the Nighthawk app, available on Google Play and the Apple App Store. -
Install your extender
Connect your mobile phone to the extender WiFi network called NETGEAR_EXT. Open the Nighthawk app and follow the step-by-step instructions to set up your extender. -
Do more with the app
Check out everything you can do on the Nighthawk app! Run a speed test, see all the connected devices, and more.
Support and Community
Visit netgear.com/support to get your questions
answered and access the latest downloads.
You can also check out our NETGEAR Community for helpful advice at community.netgear.com
As I do not have wifi where I need to use this extender am I able to plug the ethernet into the output to supply service?
Yes, you can. It will actually be fast if you do also. I had mine about 100 feet away with CAT 6 connection and it worked great.
Do u have to register this device?
No, I don’t think you can. I do not think Netgear supports equipment sold by anyone other than Netgear. You can try but I do not think Netgear will allow you to register a product sold by Amazon. I just bought a router from Netgear and it was automatically registered to my account.
Can I direct connect my computers to this while it piggybacks off my wifi?
Yes, I have it connected to my Netgear NightHawk mesh and a cat 6 from EAX20 to my desktop. Blends well with the mesh system.
What routers will the Netgear mesh extender operate with?
It is perfect for HD video streaming and gaming and is compatible with any common WiFi network.
Worth buying a mesh WiFi extender?
Despite the fact that WiFi extenders and mesh networks both increase wireless coverage, mesh networks are much more intelligent, functionally superior, and capable of significantly greater WiFi signal expansion than extenders.
Do you use a router or a WiFi extender?
A WiFi Extender must establish a wired LAN connection to your primary router in order to function properly. The majority of folks merely don’t do this. A hard-wired Extender can function as an effective access point. As a result, it can transmit your WiFi signal while still providing you with the speed you need.
The function of a WiFi mesh extender?
To boost the WiFi signal and widen the WiFi coverage in your home, each node talks to the others. Your current wireless network is replaced by this multi- node configuration.
Is the router replaced with mesh WiFi?
A mesh network will take the place of a Wi-Fi router, yes. The majority of mesh networks contain a router that you may connect to your Internet service provider’s typical modem. The nodes of the mesh network are connected to this router wirelessly. Additionally, it might provide wired Ethernet connectors for syncing with adjacent wired devices.
How far away from the router can a WiFi extension be?
The WiFi extender can typically be placed between 100 and 400 feet away from the router. The location of these devices inside your home, the design of your home, the sort of extender you have, and your WiFi network will all play a role in this.
Do walls interfere with mesh WiFi?
Yes, the WiFi signal may go through surfaces like walls, floors, and ceilings, but it depends on the specifics. It might work just fine to cover a larger residence if the router is placed in the center of the area and the mesh points are placed in opposite directions or cover various floors.
A Wi-Fi booster: does it require an Ethernet cable?
They do function without cables, yes. You are perplexed by the numerous somewhat overlapping definitions that exist. A device that operates without a cable is a range extender. It receives and amplifies the wifi signal from the base station before transmitting it again.
How can I tell if I need to upgrade my router?
When you have accessed your router’s settings, select Administration under ADVANCED. Select the Router Update or Firmware Update button. Select “Check” from the menu. Now, the router will look for any new updates.
Do updates to my Netgear router happen automatically?
NETGEAR constantly releases firmware upgrades to improve product performance, add functionality, and strengthen security. The Nighthawk app or automatically through a webpage are the simplest ways to update the firmware on your NETGEAR router.
Video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>