LOGIC L61 6.1 Inch 4G Smartphone User Guide
- June 9, 2024
- Logic
Table of Contents
LOGIC L61 6.1 Inch 4G Smartphone
Thank you for purchasing this innovative LOGIC device. The specifications in
this document are subject to change without prior notice.
LOGIC and the LOGIC logo are registered trademarks of Swagtek. Inc. Other
trademarks are the property of their respective owners.
INSTRUCTION
Charge for 24 hours before using.
Install SIM card/ memory caret
Get to know your Logic phone
Connect your Logic: phone to the computer using the USB cable.
Copy music files from your computer to your Logic phone.
FCC Statement
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part IS of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential nstallation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
nterference to radio communications. However, there is no guarantee that
•nterference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the rece•ving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
SAR Information Statement
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radiofrequency
(RF) energy set by the Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The guidelines are
based on standards that were developed by •ndependent scientific organizations
through periodic and thorough evaluation of scientific studies. The standards
include a substantial safety margin designed to assure the safety ofall
persons, regardless of age and health. The exposure standard for wireless
mobile phones employs a unit of measurement known as the Specific Absorption
Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests forSAR are
conducted with the phone transmitting at its highest certified power level in
all tested frequency bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the phone while operating can
be well below the maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power required to reach
the network. In general, the closer you are to a wireless base station
antenna,the lower the power output. Before a phone model is available for sale
to the public, it must be tested and certified to the FCC that it does not
exceed the limit established by the government adopted requirement for safe
exposure.
The tests are performed •n positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 0.396W/Kg and when worn on the body, as described in this user guide, is 0.472W/Kg (Body-wornmeasurements differ among phone models, depending upon available accessories and FCC requirements). The maximum scaled SAR in hotspot mode is 0.498W/Kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC D: 055602520Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CT IA) web-site at http://www.wow- com.com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety to give additional protection for the public and to account for any variations in measurements.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 10mm must be
maintained between the user’s body and the handset, including the antenna.
Third-party belt-clips, holsters, and similar accessories used by this device
should not contain any metallic components. Body-worn accessories that do not
meet these requirements may not comply with RF exposure requirements and
should be avoided Use only the supplied or an approved antenna.
Warranty Certificate
Terms and Conditions
LOGIC warrants that their Products will be free from defects in material and
workmanship. The warranty period is one (I) year for the products and three
(3) months for the accessories which are part of the original package
including the battery. The warranty period begins the date of purchase by the
End-User who shall present an invoice or a purchase receipt when requiring
warranty service otherwise the warranty period will begin from the date of
manufacture of the product. LOGIC will repair a product without cost to the
customer if it presents a manufacturing defect or defect in workmanship during
the warranty period and if the defect occurred under normal conditions of use
in accordance with the instructions and specifications stated in the user’s
manual.
For additional information about the terms and conditions of LOGIC’s Limited
Warranty or to
obtain warranty service information, please visit the support section at:
logicmobility.com
logicmobility.com
Made in China
Copyright Swagtek, Inc. 2023
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>