Sleepace B502T Sleep Dot Mini Sleep Tracker User Manual

Sleep Dot
Mini Sleep Tracker
(B502T)
Powered by
Sleepace

Device Description

Installation Guide

Please open the back cover with the help of the included plectrum (see reference picture), insert the battery with the positive pole facing up and close the device. If the LED is blinking green the battery is installed correctly; if the LED is blinking red, the battery is low and needs to be changed.

Instruction

① Installation of Sleep Note App

There are two ways to download the Sleep Note App
A. Scan the QR Code.

http://apph5.sleepace.net/appDownload/sleepnote/app3x.html

B. Search “Sleep Note’” in

for download.
You will need a smart phone with Bluetooth 4.0 that supports iOS 8.0 or later or Android 4.4 or later.
• Please connect Sleep Dot according to the reminders in App after downloaded.

② Registration
Login to your Sleep Note App and register your account following the prompts.

③ Position
Slide the magnetic cover off, clip your Sleep Dot to the corner of your pillowcase and snap the magnet back on.

Note: The thickness of your pillowcase should be less than (0.08) inches.

④ Connecting and Monitoring
Login to your SleepNote App, please connect your Dot via Bluetooth and set your automatic monitoring time from your SleepNote App. Please note: Do not try to connect to your Bluetooth through your phone, but do it through the App once it prompts you to do so.
⑤ Checking Your Daily Report
Login to your Sleep Note App, click the “ ****” Button in the top right corner of your App’s Report page.
The App will sync your data and you will be able to check your daily report.
The Sleep Dot only can store data for latest 7 days. Please make sure to sync your data at least every 6 to 7 days.

LED Indicator

connected
Low Battery| Red LED blinking

• The Sleep Note App will alert you once the battery power is less than 10%. Please make sure to change the battery in time,

Specifications

Safety Notice

• Do not attempt to disassemble, service or modify the product – there are no user-serviceable parts inside.

• Do not place your Sleep Dot near a fan, speaker or other vibration source during monitoring, as it will affect the accuracy of your data.

• Keep your Sleep Dot away from liquids and liquid containers such as vases, bottles, etc. Do not wash your device with your pillowcase.

• This product is NOT a toy or a medical device.

Battery safety instructions

• Do not disassemble or dismantle the battery! Danger of explosion!
• Keep away from fire and hear sources! Danger of explosion!
• Do not dispose used batteries in the household refuse; put them in a hazardous waste container or take them to a battery collection point, at the shop where they were purchased!

Warranty

Please contact your dealers for warranty service.
For more information on the product warranty or service questions, please go to www.sleepace.com.

FCC statements:
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’ s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC ID: 2ADIOB502T
www.sleepace.com

©2015 Shenzhen Medica Technology Development Co.,
Ltd. All rights reserved.
Sleepace™ is a registered trademark of Shenzhen Medica Technology Development Co., Ltd. in the U.S. and other countries. All other trademarks included herein are the property of their respective owners.

Shenzhen Medica Technology Development Co., Ltd.
Web:www.sleepace.com
Add: 12F, Building A, Block 7, Vanke Cloud City, Xingke lst Street, Nanshan District, Shenzhen, China.

CE Notice:
The suitable temperature for the product and accessories is O°C-40°C.
Observe the national local regulations in the location where the device is to be used.

Hereby, Shenzhen Medica Technology Development Co., Ltd declares that the radio equipment type Sleep Dot Mini Sleep Tracker is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.sleepace.com

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

References

• Sleepace, smart sleep solution, smart elderly care solution.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>