Sleepace EW202W Smart Light User Manual

Sleepace EW202W Smart Light

Product Information

• Product Name: Smart Sleep Light
• Model Number: EW202W
• Version: V1.1
• Date of Manufacture: 20210508
• Weight: 128g
• Dimensions: 100*100 mm
• Color: White
• Data Transmission: Wi-Fi
• Power Consumption: White Light 6W, RGB Light 3W
• Power Adaptor: AC 100-240V 50/60HZ DC 12V/1A
• Working Life: >10000 hours

Product Usage Instructions

Using the Light

• Light On/Off: Touch the Touch Key on the top to turn on/off the light.
• Sleep-Aid Mode: Long touch the Touch Key on the top to turn on sleep-aid mode, touch the Touch Key again to turn off sleep-aid mode.
• Adjust Light’s Color: Long press the Color/Brightness Button on the bottom for about 2 seconds to enter the light color adjustment mode, the display will show the color code. Short press (+ Button)/(- Button) to switch the color in a loop.

Snooze Mode and Turn Off Alarm

• Snooze Mode: Press the Touch Key on the top, the and the icons in the LED Display will blink and enter the snooze mode. The alarm will ring again in 5 minutes. The device will exit Snooze Mode automatically after 3 times of snoozing and the alarm will not ring again.
• Turn Off Alarm: Long press the Touch Key, the and the icons in the LED Display will stop blinking, the alarm is off and will not ring again.

Controlling the Device

• Add Device: Click the Add Device button and follow the prompts to bind the device.
• Control Device: Enter the control homepage to control the lights, turn on sleep-aid mode, set the alarm clock, etc.
  Note: For more information on warranty, please contact your dealers or visit www.sleepace.com. For technical support, please contact local distributors whose information can be found on the website as well.

Smart Sleep Light can improve the sleeping environment with sleep-aid music and light. Also, it can wake you up naturally in the morning with natural sounds and simulative sunrise light.

Product Introduction

• A-Speaker / Touch Key
• B- Light
• C- LED Display
• D- Time Button
• E- Alarm Button
• F- Color / Brightness Button
• G- Volume Up
• H- Volume Down

Instructions

Using the Light

• Light On/Off
  Touch the “Touch Key”on the top to turn on/off the light.

• Sleep-Aid Mode
  Long touch the”Touch Key”on the top to turn on sleep-aid mode, touch the [Touch Key] again to turn off sleep-aid mode.

• Adjust Light’s Color

  • Long press the [Color/Brightness Button] on the bottom for about 2 seconds to enter the light color adjustment mode, the display will show the color code. Short press [+ Button]/[- Button] to switch the color in a loop.
  • Long press the [Color/Brightness Button] on the bottom again for 2 seconds , and the display will display the clock.

• Adjust Brightness:
  Turn on the light, and press the [Color/Brightness Botton] to adjust the brightness, there are 5 levels of brightness in a loop to switch.

• Adjust Light-Cycling Mode:

  • Long press the [Color/Brightness Button] for about 2 seconds to adjust light’s color , the display will show the light’s color code. Press [+ Button]/ [- Button] until Number 10 appears.
  • Long press the [Color/Brightness Button] again for 2 seconds, the light-cycling mode will be activated automatically.

• Time Setting

  • Press the “Time Button” to switch between 24/12H Format. When the LED Display shows AM/PM Icon, it means 12H Format in current.
  • Long press the “Time Button” for 2 seconds, the “Hour” in the LED Display will blink, then press + / – Button to set the hour.
  • Press the “Time Button” again, the “Minute” in the LED Display will blink, then press + / – Button to set the minute.
  • Long press the “Time Button” for 2 seconds as confirmation, the time setting is finished and the LED Display will stop blinking.

• Alarm Setting
  To set an alarm, please select your wake-up time and ringtone. When the Alarm Icon is shown in the LED Display, it means that the alarm is on.

  • Long press the “Alarm Button” for 2 seconds, the “Hour” in the LED Display will blink, then press + / – Button to set the hour.
  • Press the “Alarm Button” again, the “Minute” in the LED Display will blink, then press + / – Button to set the minute.
  • Press the “Alarm Button” again, the LED Display will show the alarm cycle, then press + / – Button to set the alarm cycle.
  • Press the “Alarm Button” again to enter ringtone selection mode, please press + / – Button to select the ringtone.
  • Long press the “Alarm Button” for 2 seconds as confirmation, the alarm setting is finished. The LED Display will stop blinking and show the Alarm Icon.
  • Press the “Alarm Button” to turn on/off the alarm.

• Snooze Mode and Turn Off Alarm

  • Press the “Touch Key” on the top, the “ ” and the “ ” icons in the LED Display will blink and enter the snooze mode. The alarm will ring again in 5 minutes. The device will exit Snooze Mode automatically after 3 times of snoozing and the alarm will not ring again.
  • Long press the “Touch Key”, the “ ” and the “ ” icons in the LED Display will stop blinking, the alarm is off and will not ring again.

• Bluetooth Connection
  Go to your smart phone’s “Settings”and enable the Bluetooth function. Select EW202W Music XXXX and connect.

• Reset
  Long press the “-Button” for 10 seconds to perform the factory reset function.

• Install the APP
  You can also download the App to enjoy more smart functions easily. Search “SleepNote” in App Store / App Market, or scan the QR code below to download the APP. Supported smart phone OS versions: Android 4.4 and above, iOS 9.0 and above.

• APP Instructions

  • Registration
    Open SleepNote App, follow the prompts to register and log in to your account.

  • Add Device
    Click the “Add Device” button and follow the prompts to bind the device

  • Control Device
    Enter the control homepage to control the lights, turn on sleep-aid mode, set the alarm clock, etc.

Specifications

Safety Notice

• Please check if the device’s voltage matches with the local voltage before you connect the device with power supply.
• The device applies to power adaptor with 100~240V and DC 12V/1A. Please stop using immediately, cut off the power supply and check carefully if there are any abnormal situations during usage.
• Please do not use the device in wet environment (e.g. bathroom, swimming pool), and the device is not allowed to get wet or let water come in. Avoid putting the device upside-down or sideways, please put the device on stable, flat, non-slippery surface.
• We suggest to use the device in the temperature range from – 10℃ to 45℃. Please disconnect the power supply if you do not use the device for a long time.
• The light source in this device should be replaced by the manufacturer or person with similar qualifications.
• If the external flexible cable of this device is damaged, the cable should be replaced by the manufacturer or person with similar qualifications.

Warranty

Please contact your dealers for warranty service. For more information on
the product, warranty or service questions, please go to www.sleepace.com.

FCC Statements

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’ s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information and Statement
This equipment complies with CE and FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

CE Notice
The suitable temperature for the product and accessories is -10℃-40℃. Observe the national local regulations in the location where the device is to be used.

Hereby, Shenzhen Medica Technology Development Co., Ltd. declares that the radio equipment type of Smart Sleep Light in compliance with Direc-tive 2014/53/EU. The full text of the EU declaration of conformity is avail-able at the following internet address: http://www.sleepace.com

Please contact our local distributors for support. Distributors’ information can be got from www.sleepace.com

Shenzhen Medica Technology Development Co., Ltd.

www.sleepace.com
Add: Floor 12,Building A,Block 7,Vanke Cloud City, Xing Ke 1st Street,Nanshan District,shenzhen
400-9300-186

References

• Sleepace, smart sleep solution, smart elderly care solution.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>