SYMYNELEC Digital Watch Recorder User Manual

SYMYNELEC Digital Watch Recorder

Introduction

The images are for reference only and subject to available products

Indicator Light Status

1. Red/green light indication: 2:00 AM/PM.
2. Blue light indication: 4:00 AM/PM.
3. Solid blue light: Standby status for recording videos.
4. Solid green light: Standby status for sound recording.
5. Solid green, blue light: Standby status for filming.
6. Solid red, blue light when charging: Being charged, the red light will be off after it is fully charged.
7. Out of memory (No memory card): It will power off after the blue light flickers for 5 seconds.
8. Low battery: It will power off after the red light flickers for 5 seconds.

Operation Instructions

1. Installing a memory card (the step is not required if ii has an internal memory): Open the rear cover by rotating it anticlockwise, open the memory card cover after removing the battery properly; install the TF card on the card cover, screw up the rear cover clockwise after properly installing the battery.
2. Formatting memory card (For the first use of memory card or deleting the files in the card)

Functions

Changing Time/Time Watermark/Video Resolution

Create a new Time.Ix! file on your computer; input the time/watermark/ resolution with spaces (attention); save the inputs and copy it to the root directory of the USB drive; the time can be modified after it is reset.

Setting description: 2016.01.01 01 :01 :01 Y 1 2016.01.01 01 :01 :01- Change it to current time
Y-Display watermark
N-Do not display watermark
1–1080P resolution: 19201080
2–720P resolution: 1280720
3–VGA resolution: 640*480

Resetting

Charging/Video Connection to Computer

Open the USB waterproof nut to connect the USB cable with a power adapter or a power bank for simultaneous charging and operation; the red and blue lights are solid when it is charged, and the red light is off after it is fully charged. It can be used as a USB drive if the USB cable is connected to a PC, and the battery can be charged as well.

Related Technical Parameters

Maintenance

• Battery: If the watch is not used for a long time, get it fully recharged before use. For safety, don’t put it near a furnace or any heat source.
• Operating temperature: 0 – 40° C. You’d better use it in room temperature to prolong the service life of the battery.
• Operating humidity: 20% – 80%. The product is not waterproof (it is waterproof when MIC2 is used). Therefore, it cannot be placed in humid environment or work in water.
• Camera lens: Don’t expose the camera lens to strong light like sunlight to avoid damaging the optical equipment.
• Cleaning: Use dry cloth to wipe the glass before filming. The glass is equipped with a transparent cover for protection. Remove the cover before using the camera.

SYMYNELEC is committed to helping our customers improve their quality of life through superior products.
If you need any assistance, please feel free to contact us.
We promise to provide you with a satisfactory solution as soon as possible, at your service!

Email: ximinbokeji@163.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>