FIRST AUSTRIA FA-5565-1 Fan Heater Instruction Manual

FA-5565-1 Fan Heater
Instruction Manual

Thank you for buying an ORIGINAL Product of Only GENUINE with this

(select one)
Nominal heat output| Pnom| 2,0| KW| Manual heat charge control, with integrated thermostat| NA
Minimum heat output (indicative)| PMing| 1,1| KW| Manual heat charge control with room and/or outdoor temperature feedback| NA
Maximum continuous heat output| P max| 2,0| KW| Electronic heat charge control with room and/or outdoor temperature feedback| NA
Auxiliary electricity consumption| Fan assisted heat output| NA
At nominal heat output| elm ax| –| KW| Type of heat output/room temperature control (select one)
At minimum heat output| elfin| –| KW| Single stage heat output and no room temperature control| No
In standby mode| Elo| 3| KW| Two or more manual stages, no room temperature control| No
| | | | With mechanic thermostat room temperature control| No
| | | | With electronic room temperature control| Yes
| | | | Electronic room temperature control plus day timer| No
| | | | Electronic room temperature control plus week timer| No
| | | | Other control options (multiple selections possible)
| | | | Room temperature control, with presence detection| No
| | | | Room temperature control, with open window detection| No
| | | | With distance control option| No
| | | | With adaptive start control| No
| | | | With working time limitation| Yes
| | | | With black bulb sensor| No
Contact details| TIMETRON Raimundgasse 1/8, A-1020 Vienna, Austria

FAN HEATER
**** This product is only suitable for well insulated spaces or occasional use.

IMPORTANT SAFETY INSTRUCTIONS

The safety of electrical appliances from FIRST Austria complies with the recognized technical directives and legal regulations for safety. Nevertheless, you and the other users of the appliance should observe the following:

• Please read these instructions carefully before using this appliance for the first time and keep them for further reference.
• This product has not been designed for any other uses than those specified in this manual.
• Before connecting the appliance to the power source, check if the voltage indicated on the appliance corresponds with the mains voltage in your home. If this is not the case, contact your dealer and do not use the appliance.
• If the appliance is grounded (protection class I), the wall outlet and any extension to which it is connected must also be grounded.
• Do not operate or place any part of this appliance on or near any hot surface (such as gas or electric burner or a heated oven).
• Ensure that the appliance is used on a firm and flat surface out of reach of children, this will prevent from overturning and avoid damage or injury.
• Do not use the product near gas sources or other flammable materials or objects.
• Keep a safe distance from furniture and other objects.
• Do not point the fan heater directly at furniture or other objects.
• Keep the back of the unit at least 30 cm away from walls or objects to ensure free airflow.
• The appliance must not be exposed to dripping or splashing water. Do not place any water containers (such as vases) next to or on top of the appliance.
• To protect from electrical hazard, do not immerse this appliance or cordset in any liquids.
• If the appliance or the power cord shows any signs of damage, do not operate it! Take the product to an authorized and qualified service center for inspection or repair.
• Do not block or cover the air inlets and outlets in any way!
• Do not place flammable material (paper, cloth, etc.) on or near the appliance.
• Make sure the appliance is switched off before plugging in or unplugging the device.
• This device is intended for home use only, do not use it commercially.
• Do not use this appliance outdoors.
• Do not leave the appliance unattended while it is operating.
• Do not use this heater in the immediate vicinity of a bathtub, a shower or a swimming pool.
• This appliance heats up during use. To avoid burns, do not touch hot surfaces.
• Always disconnect the appliance from power after use, before cleaning and in the event of a malfunction.
• As long as the appliance is hot, it should be supervised, even if it is not connected to the mains. Allow the appliance to cool down fully before cleaning and storing it.
• Do not pull directly on the power cord, rather pull on the plug to disconnect the appliance from the power source.
• The appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach of children less than 8 years.
• We are excluded of liability for all damages that may arise if the appliance is used for purposes other than originally intended or if it is used inappropriately.
• Repairs and other work undertaken on the unit must only be done by authorised specialist personnel!

FEATURES

• Electronic room temperature control
• Remote Control
• Timer
• Oscillation
•  2 Heating Levels
• Minimum heat output: 1.1 kW
• Maximum heat output: 2 kW
• Fan only mode (no heating)

DESCRIPTION: (Fig. A)

1. Display
2. Control panel
3. Heating element
4. Temperature adjustment buttons [+]/[-]
5. Oscillation button [OSC]
6. Timer button [TIMER]
7. Heating mode button [ ]
8.  ON/OFF button [ON/OFF]
9. Cover for air filter

OPERATION

Set up and switch on:

1. Place the fan heater on a level, flat surface.
2. Connect the fan heater to the power outlet.
3. Turn on the power switch on the back of the fan heater.
4. In standby mode, the display shows the currenroom temperature.
5. To start the fan heater, press the [ON/OFF] button. The default heating mode is “low heating power”.

Mode selection:
Press the [ ] button (repeatedly) to switch between the different modes…

| High heating power The heating power is around 2000 W
(2 heating indicators light up on the display)
---|---
| Low heating power
The heating power is around 1100 W (1 heating indicator lights up on the display)
| Fan only mode
Only the fan is running, no heating.

Temperature selection:
Press the [+]/[-] buttons to select the desired room temperature.
The temperature can be set from 10 to 35°C in 1°C steps.
In this smart mode the heater will regulate the heating element between low, high and off automatically to maintain the set temperature.
However, the fan will continue to run in any case.
Oscillation function:
Press the [OSC] button to start or stop the oscillation function.
Timer function:
Press the [TIMER] button (repeatedly) to set a time after which the heater turns off automatically.
The timer can be set from 0 to 8 hours in 1h steps. Selecting 0 deactivates the timer.

Remote Control: (Fig. B)
Use a CR2025 (3 V) battery for the remote control. All functions that can be performed with the remote control are identical to those on the control panel of the fan heater.

SAFETY FEATURES

Overheat protection:
The fan heater is equipped with an overheating protection. Overheating generally occurs only if one of the openings of the fan heater is covered, blocked or clogged. In case of overtemperature inside the unit, the heater will switch off. In this case, unplug the fan heater from the power outlet and remove any objects blocking the grids. Allow the unit to cool down for about 30 minutes before using it again. Should the problem persist, please contact the customer service.
Tip-over safety switch:
The fan heater is equipped with a tip-over safety switch that will shut off the fan heater immediately if it tips over to prevent potential fire hazards.
Note: After the heater has been switched off, the fan continues to run during cooling phase until it switches off.

CLEANING & MAINTENANCE

• Always unplug the appliance from power and allow it to cool down before cleaning.
• Never immerse the appliance or power cord in water. Do not let the electrical parts come into contact with moisture.
• Wipe the heater with a soft damp cloth.

TECHNICAL SPECIFICATIONS:

220-240 V • 50 Hz • 2000 W
Environment friendly disposal
You can help protect the environment!
Please remember to respect the local regulations: hand in the non-working electrical equipment to an appropriate waste disposal center.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>