CROSLEY ARX443UW Top Mount Refrigerator Instruction Manual
- June 9, 2024
- Crosley
Table of Contents
ARX443UW Top Mount Refrigerator
Product Information
Model: ARX443UW
This is a refrigerator appliance with a separate freezer compartment. It has a
thermostat dial and push-button defrost feature for controlling the
temperature inside the refrigerator.
The appliance is equipped with glass shelves, magnetic gasket, and leveling
legs. It also features a drip tray, bottle racks, and can storage door liner.
Safety Requirements
- This appliance is not intended for use by persons (including children) whose physical, sensory, or mental capabilities may be different or reduced, or who lack experience or knowledge, unless such persons receive supervision or training to operate the appliance by a person responsible for their safety.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- Do not connect your appliance to extension cords or together with another appliance in the same wall outlet. Do not splice the power cord. Do not under any circumstances cut or remove the third ground prong from the power cord. Do not use extension cords or ungrounded (two prongs) adapters. If the power supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similar qualified person to avoid hazard.
Product Usage Instructions
Installation Instructions
Refer to the user manual for installation instructions.
Operating Instructions
Location
Place the appliance in a dry and well-ventilated area away from heat sources and direct sunlight.
Temperature Selection
- The temperature of the appliance can be adjusted by turning the knob on the graduated blue thermostat dial.
- The thicker, darker blue side of the dial is the coldest setting. The thinner, lighter blue side of the dial is the warmest setting.
- The internal temperature may vary depending on ambient temperature in the home, the quantity of food stored, and the frequency that the door is opened.
- To stop the cooling function, turn the control knob to the 0 position.
Defrosting Instructions
- To initiate defrosting, push the red button located inside the refrigerator compartment.
- If the red button is pushed accidentally, it is not possible to stop the defrosting process. You must let the defrost cycle run its course before using the refrigerator again.
- Never use sharp or pointed instruments to remove ice from the freezer compartment. The freezer compartment contains refrigerated gas lines. If these lines are accidentally pierced, it will render the refrigerator inoperable and void the manufacturer’s warranty.
- Do not allow the refrigerator to continue operation if the freezer compartment is pierced.
Leveling Instructions
Ensure that the appliance is level by following these steps:
- Turn the leveling leg counter-clockwise as far as it will go, until the top of the foot is touching the bottom of the chassis.
- Slowly turn the leveling leg clockwise until the appliance is level.
Important Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAFETY REQUIREMENTS
DANGER: Risk of fi re or explosion. Flammable refrigerant used. Do not
puncture refrigerant tubing.
- Do not use mechanical devices to defrost refrigerator.
- Ensure that servicing is done by factory authorized service personnel, to minimize product damage or safety issues.
- Consult repair manual or owner’s guide before attempting to service this product. All safety precautions must be followed.
- Dispose of properly in accordance with federal or local regulations.
- Follow handling instructions carefully.
WARNING: Keep ventilation openings, in the appliance enclosure or in the
built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type recommended by the
manufacturer.
CAUTION: Children should be supervised to ensure that they do not play
with the appliance.
DANGER: Risk of child entrapment. Before throwing away an old appliance:
- Remove the door or lid.
- Leave shelves in place so that children may not easily climb inside.
This appliance is intended to be used in household and similar applications such as:
- Staff kitchen areas in shops, offices and other working environments;
- Farm houses and by clients in hotels, motels and other residential type environments;
- Bed and breakfast type environments;
- Catering and similar non-retail applications.
SAFETY REQUIREMENTS
This appliance is not intended for use by persons (including children) whose
physical, sensory or mental capabilities may be different or reduced, or who
lack experience or knowledge, unless such persons receive supervision or
training to operate the appliance by a person responsible for their safety.
Do not store explosive substances such as aerosol cans with a flammable
propellant in this appliance.
GROUNDING INSTRUCTIONS
This appliance must be grounded. Grounding reduces the risk of electrical
shock by providing an escape wire for the electrical current.
This appliance has a cord that has a grounding wire with a 3-prong plug. The
power cord must be plugged into an outlet that is properly grounded. If the
outlet is a 2-prong wall outlet, it must be replaced with a properly grounded
3-prong wall outlet. The serial rating plate indicates the voltage and
frequency the appliance is designed for.
WARNING – Improper use of the grounding plug can result in a risk of electric shock.
Consult a qualified electrician or service agent if the grounding instructions
are not completely understood, or if doubt exists as to whether the appliance
is properly grounded.
Do not connect your appliance to extension cords or together with another
appliance in the same wall outlet. Do not splice the power cord. Do not under
any circumstances cut or remove the third ground prong from the power cord. Do
not use extension cords or ungrounded (two prongs) adapters.
If the power supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similar qualifi ed person in order to avoid hazard.
INSTALLATION INSTRUCTIONS
LOCATION
- Two people should be used when moving the appliance.
- Remove interior and exterior packaging prior to installation. Wipe the outside of the appliance with a soft, dry cloth and the inside with a lukewarm wet cloth.
- Place the appliance on a floor that is strong enough to support it when it is fully loaded.
- Do not place the appliance in direct sunlight or near sources of heat, such as a stove or heater, as this can increase electrical consumption. Extreme cold ambient temperatures may also cause the appliance to perform improperly.
- Do not use the appliance near water, for example in a wet basement or near a sink.
- This appliance is intended for household use only. It is not designed for outside installation, including anywhere that is not temperature controlled (garages, porches, vehicles, etc.).
- Before connecting the appliance to a power source, let it stand upright for approximately 6 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
- This appliance is 52.6 cm (20.7 inches) wide by 83.3 cm (32.79 inches) high by 53 cm (20.9 inches) deep. Make sure that you leave the minimum amount of space between the appliance and all surrounding walls and vents.
- Allow 12.7 cm (5 inches) of space between the back, sides and top of the appliance and all adjacent walls.
- This appliance is intended for free-standing installation only and is not intended to be built into a cabinet or counter. Building in this appliance can cause it to malfunction.
FEATURES
- Thermostat Dial and Push Button Defrost: For controlling the temperature inside the refrigerator; the compressor activates as soon as the temperature rises above the desired level.
- Freezer Compartment with Freezer Door: Separate freezer section can hold small items.
- Drip Tray: Catches the water that drips off the evaporator when defrosting.
- Glass Shelves
- Magnetic Gasket: Tight fitting door seal keeps all the cooling power locked inside. No hooks or latches.
- Bottle Racks: For tall, small and medium cans or jars.
- Can Storage Door Liner: Holds 12 oz cans of pop, juice, or beer.
- Leveling Legs: Adjust so the unit is level.
TEMPERATURE SELECTION
The temperature of the appliance can be adjusted by turning the knob on the
graduated blue thermostat dial.
The internal temperature may vary depending on ambient temperature in the
home, the quantity of food stored and the frequency that the door is opened.
The thicker, darker blue side of the dial is the coldest setting. The thinner,
lighter blue side of the dial is the warmest setting. To stop the cooling
function, turn the control knob to the “0” position.
LEVELING INSTRUCTIONS
There is an adjustable leg on the bottom of the appliance that can be turned
up or down to ensure that the appliance is level.
- Turn the leveling leg counter-clockwise as far as it will go, until the top of the foot is touching the bottom of the chassis.
- Slowly turn the leveling leg clockwise until the appliance is level.
DEFROSTING INSTRUCTIONS
This appliance is equipped with a semi-automatic defrost system. Defrosting
should be activated any time the ice build up inside the freezer compartment
reaches 6 mm (1/4”) thick.
To activate the defrost cycle, push the red button located in the center of
the thermostat dial. Activating the defrost cycle will disable the
refrigerator function until the temperature surrounding the evaporator inside
the appliance reaches approximately 10°C (50°F). The refrigerator will
automatically resume normal functioning once the defrost cycle is complete.
- Remove all food before starting the defrost cycle.
- Remember to protect your floors or counters during the defrosting process by putting towels or a pan under the appliance in case of leaking.
- Leaving the refrigerator door partially open can help the defrosting process. You must remember to close the door before regular operation resumes.
- Ensure that the drip tray is under the evaporator to collect melted water.
Note: If the red button is pushed accidentally, it is not possible to stop the defrosting process. You must let the defrost cycle run its course before using the refrigerator again.
IMPORTANT
Never use sharp or pointed instruments to remove ice from the freezer
compartment.
The freezer compartment contains refrigerated gas lines. If these lines are
accidentally pierced it will render the refrigerator inoperable and void the
manufacturer’s warranty.
Do not allow the refrigerator to continue operation if the freezer compartment
is pierced.
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any length of time during
this process, it must be allowed to remain upright for 6 hours before plugging
it in to avoid damage to the internal components.
When reinstalling the door, ensure that the top of the door is level with the
top of the cabinet. If the door is not level, the rubber gasket will not make
a good seal with the cabinet which can cause the appliance to malfunction
.
CARE & MAINTENANCE
CLEANING
Ensure the appliance is unplugged before cleaning.
-
To clean the inside of the appliance, use a soft cloth and a solution of a tablespoon of baking soda to one quart of water or a mild soap solution or some mild detergent.
Wash removable shelves in a mild detergent solution, then dry and wipe with a soft cloth. -
Clean the outside with a soft, damp cloth and some mild detergent.
-
It is important to keep the area clean where the door seals against the cabinet. Clean this area with a soapy cloth. Rinse with a damp cloth and let dry.
Note: Do not use cleaners containing ammonia or alcohol on the appliance. Ammonia or alcohol can damage the appearance of the appliance. Never use any commercial or abrasive cleaners or sharp objects on any part of the appliance.
POWER FAILURE
Most power failures are corrected within a few hours and should not affect the
temperature of your appliance if you minimize the number of times the door is
opened. If the power is going to be off for a longer period of time, take the
proper steps to protect your contents.
Note: Wait 3 to 5 minutes before attempting to restart the refrigerator if operation has been interrupted.
VACATION
- Short vacations: Leave the appliance operating during vacations of less than three weeks.
- Long vacations: If the appliance will not be used for several months, remove all items and turn off the appliance. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly, blocking it open if necessary.
ENERGY SAVING TIP
The appliance should be located in the coolest area of the room, away from
heat producing appliances, and out of direct sunlight. Do not overload the
unit or block any ventilation openings.
MOVING
- Make sure the appliance is empty.
- Secure the shelves with tape.
- Secure the door with tape.
- Turn the adjustable foot up to the base to avoid damage.
- Protect the outside of the appliance with a blanket or similar item.
- Be sure the appliance stays in the upright position during transportation.
- If the appliance is placed on its back or side during transportation, upon reaching the destination, allow it to remain upright for 6 hours before plugging in to avoid damage to internal components.
DISPOSAL
This appliance may not be treated as regular household waste, it should be
taken to the appropriate waste collection point for recycling of electrical
components. For information on local waste collection points, contact your
local waste removal agency or government office.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE
No power|
- A fuse may be blown or the circuit breaker tripped
- Plug not fully inserted into the wall outlet
Internal temperature not cold enough|
- Temperature setting is too warm
- Door is not shut properly or opened excessively
- Recently added a large quantity of warm food to the cabinet
- Close proximity to heat source or direct sunlight
- Ambient temperature or humidity is very high
Appliance runs continuously|
- Temperature setting is too cold
- Door not shut properly or opened excessively
- Recently added a large quantity of warm food to the cabinet
- Close proximity to heat source or direct sunlight
- Ambient temperature or humidity is very high
FOR SERVICE/WARRANTY INFORMATION CONTACT: 844-CROSLEY
(844-276-7539)
CrosleyCare Service 3 Sperry Rd. Fairfield, NJ 07004
Website: www.crosley.com
FOR PRODUCT INFORMATION or QUESTIONS ON THE EXTENDED WARRANTY; CONTACT:
800-356-5268 Crosley
Extended Warranty 11430 Gravois Road, Ste 310 St. Louis, MO 63136
Disclaimer: The design and specifications are subject to change without prior notice for product improvement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>