Livoo TES254 2-in-1 Bluetooth Earphones Speaker, Bluetooth Headset User Manual
- June 9, 2024
- Livoo
Table of Contents
TES254 2-in-1 Bluetooth Earphones Speaker, Bluetooth Headset
Product Information
The Livoo device is a combination of Bluetooth earphones and Bluetooth speakers. It comes with two pairs of ear tips, a carabiner, and a USB-C charging cable. The input battery for the earphones is 3.7V DC – 800mAH, while the input for the speaker is 5V 1A.
Safety Instructions
It is important to read the instruction sheet before using the Livoo device
for the first time and keep it for future use. Keep the device away from any
water or wet areas, naked flames, direct sunlight or heat, and temperatures
that could damage it. Do not insert foreign objects into the device and avoid
dropping it as harsh impacts could damage it. The appliance shall not be used
by children.
Product Usage Instructions
Turning On/Off:
To turn on the earphones, open the cover and they will power on
automatically (1). To turn off, place the earphones in the charging
compartment and close the cover (2). The earphones will turn off automatically
after being disconnected for more than 6 minutes.
Wearing the Earphones:
Identify the left and right earphones, and rotate the earpiece to best fit
your ear.
The function of Buttons:
- Ecouteur gauche/Ecouteur droit: Left/Right Earphone
- Appel/Raccrocher: Double-click
- Diminuer le volume: Triple-click on the right earphone
- Siri: Press and hold for 3 seconds
- Transparency/ANC/Normal mode: Press and hold for 3 seconds
- Bluetooth Connection: Refer to Figure 3
Cleaning and Maintenance:
Refer to the Livoo website for cleaning and maintenance guidelines.
Thank you for choosing a Livoo device!
Your blender, your barbecue, and your headphones are not just objects, they
are extensions of yourself, allowing you to get closer to your friends and
family, to bring them together, to laugh and to share experiences. Livoo’s aim
is to help you live your life to the fullest, whatever wishes you have
throughout the year. Winter raclette, summer barbecue. Or the other way
around. It’s up to you. Take advantage of this freedom for feel good moments
every day. That’s why we’re constantly innovating and creating clever devices
full of zest, but most of all, accessible. Find our entire collection on our
website www.livoo.en.
Livoo, your daily companion till social networks
Safety Instructions
Please, take time to read well the instruction sheet before the first use and keep them for future use. Misuse of the appliance can damage it or hurt the user. Assure that you use the appliance for the use for which it is designed. We refuse any responsibility as for the damages by incorrect use or a bad manipulation.
- Keep this device away from any water, liquid or wet areas. This device shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
- Use in dry locations only.
- Keep this device away from naked flames such as candles.
- This device should be only operated from the type of power source indicated on the marking label.
- Do not place the device in direct sunlight or heat. Keep away from temperatures over 40°C.
- Make sure the device has plenty of ventilation.
- Do not press the buttons too hard as it could damage the device.
- Do not use chemicals on this device.
- Never try to repair this device yourself because it could lead to electric shock, take it to an approved technician.
- If the USB cable is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid hazards.
- WARNING: For the purposes of charging, only use the detachable USB cable provided.
- If you want to use your device with an adaptor(not supplied) instead of a USB cable, only used an adaptor with a power supply of 5V.
- When the unit is not in use, make sure it is correctly turned off and stored in a cool dry place.
- Do not insert foreign objects into the device.
- The appliance shall not be used by children.
- Avoid dropping it as harsh impacts could damage the device.
Technical Specifications
Bluetooth earphones | Bluetooth speaker |
---|---|
Input Battery: 3.7V DC – 800mAH | Input: 5V 1 A |
Rechargeable Battery: 40mAh | Rechargeable Battery: 800mAh |
Bluetooth Version: V5.0 | Bluetooth Version: V5.0 |
Frequency: 2402MHz-2480MHz | Frequency: 2402MHz-2480MHz |
Play Bluetooth music time: 4-5Hrs | Play Bluetooth music time: 6-8Hrs |
Standby time: 150 Hours | Standby time: 300 Hours |
Microphone sensitivity: -42db±3db | Microphone sensitivity: -42db±3db |
Signal to noise ratio: 92db±3db | Signal to noise ratio: 92db±3db |
Speaker impedance: 16Ω | Speaker impedance: 16Ω |
Speaker driver: 10mm | Speaker driver: 10mm |
Drawing of the device
FIGURE: 1
1 | 2 Earphones |
---|---|
2 | Bluetooth speaker |
3 | 2 pairs of ear tips |
4 | 1 Carabiner |
5 | 1 USB C charging cable |
Operation Instruction
Charging Operation
Fully charge the appliance before use. Insert the cable USB-C plug into the
dedicated slot on the device. Connect the cable USB plug to another device
able to load your device. Respect carefully the maximal loading tension
mentioned on the device (5V) to not damage the device. The speaker is charged
synchronously when it is turned on. The light of the speaker will turn white
when charging. When the battery is full, the light turnoff.
Note: charge the device at least once per 3 months when not in use for a
long time. Otherwise the
the battery may be damaged.
Turning on turning off (Figure 2)
-
Turn on:
Open the cover and the earphones will power on automatically(1). -
Turn off:
- Place the earphones in the charging compartment, and close the cover(2).
- The earphones will turn off automatically after being disconnected for more than 6 minutes.
Wearing the earphones (Figure 5):
- Identify the left and right earphones.
- Identify the left and right earpieces. Rotate the earpiece to best fit your ear.
Button function
Left earphone | Right earphone |
---|---|
Pause/play/answer call: press one time on the left earphone | Pause/play/answer |
call: press one time on the right earphone
Previous song/reject call/hang up: press two times on the left earphone|
Previous song/reject call/hang up: press two times on the right earphone
Decrease the volume: press three times on the left earphone| Increase the
volume: press three times on the right earphone
Siri: one press of 3 seconds.| Transparency/ANC/ normal mode: one press of 3
seconds.
Connexion Bluetooth ( Figure 3).
Turn Bluetooth off when you’re not using it. The earphones automatically
pair with each other after opening the speaker. One of the indicators will
flash to blue light. The other one light up blue for one second and then goes
out. Activate the Bluetooth settings on your mobile phone and search for
TES254.
Bluetooth speaker operation instructions:
Turn on the appliance; press the switch for 2 seconds. Turn off the
appliance: press the power button two times. In the power-on state, if the
Bluetooth speaker is not connected to the device, it will automatically shut
down within 5 minutes. When the Bluetooth speaker is connected to the device
but not used, after 5 minutes the light will turn off and it will enter the
power saving mode.
Factory reset (Figure 4):
You can be resetting your earphones to factory settings if any abnormal
connectivity issues occur. Clear the pairing record on your device. Pick up
both earphones from the charging compartment and both of them will flash blue
light. Press the touch button on the left and right ear 6 times respectively,
the indicator light goes out, rest completely. Put them back to the charging
compartment, close it, and pick them out again to follow the first pairing
operation to use. If the indicator light does not go out after pressing 6
times, put the earphones back into the charging compartment and repeat above
steps.
Cleaning and storage
Keep Clean of the Earbuds
Clean the charge contacts weekly with an alcohol pad for a reliable charge.
Clean the mesh weekly
with an alcohol pad to optimize sound performance
Note: The Bluetooth word mark is owned by the Bluetooth SIG.
UE DECLARATION OF CONFORMITY
We are, DELTA BP61071
67452 Mundolsheim – France
Declare under our own responsibility that the article :
- Description: Bluetooth 2 in 1 earphone speaker
- Reference: TES254
to which this declaration applies, is in conformity with the applicable EU harmonization legislation:
DIRECTIVES | NORMES or SPECIFICATIONS |
---|---|
ROHS 2011/65/EU | The object of the declaration described above is in |
conformity with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
EU 2011/65/EU et EU 2015/863
(RED) 2014/53/EU| EN 50663:2017. EN IEC 62368-1:2020 + A11:2020. ETSI EN 301 489-1 V2.2.3 (2019).
ETSI EN 301 489-17 V3.2.4 (2020). ETSI EN 300 328 V2.2.2 (2019).
Mundolsheim, 03/10/2022
Signature: David Bousquet , CEO
www.livoo.fr
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>