PLT SOLUTIONS WATTAGE Color Selectable LED Suspension Light Instruction Manual
- June 9, 2024
- PLT SOLUTIONS
Table of Contents
PLT SOLUTIONS WATTAGE Color Selectable LED Suspension Light Instruction
Manual
WARNING
- Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions.
- To reduce the risk of death, personal injury, or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards, read all warnings and instructions included with and on the fixture box and all fixture labels.
- Proper grounding is required to ensure safety.
- Power must be turned off at the breaker before installation or maintenance.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Wear gloves and eye protection at all times while installing, servicing, or performing maintenance on the luminaire, and avoid direct eye exposure to the light source while it is on.
- Do not install damaged product. Inspect luminaire for damage that may have occurred during transit. If damaged, contact the manufacturer immediately.
- These instructions do not purport to cover all details or variations in equipment nor to provide every possible contingency to meet in connection with installation, operation, or maintenance. Should further information be desired or should particular problems arise which are not covered sufficiently for the purchaser’s or owner’s purposes, contact the manufacturer.
WARNING
- To prevent wiring damage, do not expose wiring to edges of sheet metal or any other sharp objects.
- All wiring connections should be capped with UL approved wire connectors.
- Risk of burn. Disconnect power and allow fixture to cool before handling fixture.
CAUTION
- Do not create any new or alter any existing holes.
- Verify that supply voltage is correct by comparing it with the luminaire label information.
NOTICE
- Account for small parts and destroy packing material, as these may be hazardous to children.
- Minimum 90° supply conductors.
- Specifications and dimensions subject to change without notice.
- Suitable for dry or damp location.
Installation Instructions
Pendant Mounting to Drywall Ceiling
-
Take the fixture and accessories out of the box
-
Attach the cable to the canopy
-
Connect the AC wires. Push all of the wires back into the junction box. Mount the cross bar on the junction box.
-
Place the canopy on the ceiling.
-
Hang luminaire. Screw both bottom parts of the cables clockwise and secure them on the top of the housing. Make sure the light is securely hung.
-
The installation is completed (Cable Tie supplied by customer).
Wiring Diagram
Documents / Resources
| PLT
SOLUTIONS WATTAGE Color Selectable LED Suspension
Light
[pdf] Instruction Manual
PLT-90276, WATTAGE, WATTAGE Color Selectable LED Suspension Light, Color
Selectable LED Suspension Light, LED Suspension Light, Suspension Light, Light
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>