KaiXingHui YW100A Magnetic Wireless Charger User Guide

Magnetic Wireless Charger
User Guide

YW100A Magnetic Wireless Charger

Manufacturer Information

Name| ShenZhen KaiXingHui Technology Co., Ltd.
Address| 1-3/F, No.6 Yunfeng Road, Queshan, Gaofeng Community, Dalanq Street, Longhua District, Shenzhen, China 518000
E-Mail| sale@kaixinqhui.com

Cases Adapters Recommended

• High Quality/Phone Original Adapter| * Inferior 3rd Party Adapter

  1.  Phone Case with Magnate
     

• Slim Case(within 4mm)| * Case Thickness(Over 4mm)
  2. Phone Case without Magsafe
  

  Slim Case(within 4mm)
  Charge Only, No Magsafe| * Case Thickness(Over 4mm)
  

• Metal Ring/Case| * Magnetic Pad

Product Description

Magnetic Wireless Charger

Instructions

1. Connect to power supply via USB C or USB C to A converter.
2. Just a simple snap on your iPhone 12/13/14 Series. Will offer magical attach experience with built-in magnets.

• Note: Wall Charger is not included

Attention

1. Avoid dropping.
2. Do not disassemble.
3. Do not expose to liquids.
4. The maximum ambient temperature during use of this product must not exceed 40°C.
5. Naked flame sources, such as candles, must not be placed on the product.

FCC ID: 2AOSUYW100-A
FCC Compliance
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,and (2) this device must accept any terafarad ( interference received,including interference that may cause undesired operation.
FCC statement: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2)this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. Information on electrical and electronic equipment. The following note is aimed at private end users who electrical and/or electronic equipment.

1. Separate collection of old devices
   Electrical and electronic equipment that has become waste is known as old equipment. owners of old devices must collect them separately from unsorted municipal waste. Old devices do not belong in the household waste, but in special collection and return systems.

2. Batteries and rechargeable batteries
   Owners of old devices have to separate old batteries and accumulators, which are not enclosed by the old device, from the old device before handing them over to a collection point. This does not apply if the old devices are taken from public waste disposal authorities handed in and separated there from other old devices for the purpose of preparation for reuse.

3. Options for returning old devices
   If you own old devices, you can hand them in to the return or collection options set up and available by the public waste disposal authorities for the purpose of properly disposing of old devices. If necessary, it is also possible to hand in electrical and electronic equipment for the purpose of reusing the equipment. You can obtain more detailed information on this from the respective collection or return point. Below you will find the possibility to view an online directory of the collection and return points: https://www .ear-system.de/Par-ver7eirhnisisammel-und-rtipeknahmestellen

4. Data protection notice
   Old devices often contain sensitive personal data. This applies in particular to information and telecommunications equipment such as computers and smartphones. In your own interest, please note that each end user is responsible for deleting the data on the old devices to be disposed of.

5. Meaning of the symbol “crossed out garbage can”
   The symbol of a crossed-out garbage can regularly depicted on electrical and electronic equipment indicates that the respective device must be collected separately from unsorted municipal waste at the end of its service life.

C&E Connection E-Commerce (DE) GmbH
Zum Linnegraben 20, 65933, Frankfurt am Main, Germany
info@ce-connection.de
+49 017 46508451
JunBright Ltd
51 Chalton Street London, England, NW1 1HY
yldyx112@outlook.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>