iFi ZEN BLUE High Resolution Wireless Streamer User Guide
- June 30, 2024
- ifi
Table of Contents
ZEN BLUE High Resolution Wireless Streamer
“`html
Product Information
Specifications:
-
Power Input: 5V DC
-
Input Options: Single-Ended RCA, Balanced 4.4mm, S-PDIF, USB-C
Audio + Power -
Bluetooth Codecs: SBC, aptX, aptX HD, aptX Adaptive, aptX
Lossless, LDAC, AAC, LHDC/HWA -
Supported PCM Formats: 44.1/48kHz, 88.2 – 192kHz
Product Usage Instructions
1. Power:
To power on the device, long press the Power switch. Use a 5V DC
power source for operation.
2. Input Selection:
Use the button to toggle between different input options
including Single-Ended RCA Input, Balanced 4.4mm Output, S-PDIF
Input, and USB-C Audio + Power Input.
3. Bluetooth Pairing:
To pair via Bluetooth, long press the designated button to enter
pairing mode. Select the device on your music source and establish
the connection. Once connected, the LED indicator will show the
status.
4. Output:
The device supports various output options including
Single-Ended RCA Output, S-PDIF Output, and Balanced 4.4mm Output
for audio transmission.
5. Modes:
The device offers different modes like RX Mode, TX Mode, and DAC
Mode for different audio transmission scenarios. The LED display
will indicate the current mode along with supported codecs and PCM
formats.
FAQ (Frequently Asked Questions)
Q: How do I switch between different input options?
A: Use the button on the device to cycle through available input
options like Single-Ended RCA Input, Balanced 4.4mm Output, S-PDIF
Input, and USB-C Audio + Power Input.
Q: How do I know if the Bluetooth pairing was successful?
A: Once connected, the LED indicator will display the status
indicating a successful Bluetooth pairing.
“`
Set-Up video
1 Power
Operating Modes Power
Transmission Mode & Low Latency Brightness & Bluetooth Pairing
Input Selection
Single-Ended RCA Input Balanced 4.4mm Output
Bluetooth Codec & PCM formats display
Audio Format kHz
S-PDIF Input Power 5V DC
Power Switch Long Press On/Off
2 Input
Single-Ended RCA Output
S-PDIF Output
USB -C Audio + Power Input
Antenna
Single Ended RCA Input
Antenna
DC (5V) Use the button to choose
between the following input options.
S-PDIF Input
USB -C Audio + Power Input
3 Bluetooth Pairing
Long press
to enter pairing mode
Pair your music source
Once connected
iFi Lossless Audio
4 Output
iFi Lossless Audio
Connected for Audio
Single-Ended RCA Output
S-PDIF Output Balanced 4.4mm Output
5 Modes
This button cycles through 3 operating modes: · RX Mode · TX Mode · DAC Mode
6
Codec and PCM
7 kHz
RX Mode
LED
FORMAT
SBC aptX aptX HD aptX Adaptive aptX Lossless LDAC AAC
LHDC/HWA
TX Mode DAC Mode
SBC aptX aptX HD aptX Adaptive aptX Lossless LDAC
PCM
kHz
LED kHz 44.1/48 88.2 – 192
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>