Fingers Go-Hi Pods2 True Wireless Earbuds User Guide

Fingers Go-Hi Pods2 True Wireless Earbuds User Guide

Important – Warnings & Safety Instructions

1. To avoid accidental ingestion, keep the earbuds away from small children and pets. The earbuds contain a lithium battery, and may be hazardous if swallowed. If ingested, seek immediate medical attention. When not in use, place the earbuds in the charging station with carry pouch bundled, thereby keeping out of reach from small children and pets
2. While placing the earbuds in your ears, please keep the volume down and then gradually adjust the volume to an appropriate, comfortable level.
3. Prolonged use at high volumes might damage your hearing.
4. Focus on your safety and of others. We recommend to not listen to music while riding or driving, or at any time where the inability to hear surrounding sounds may present a danger to yourself or others.
5. If you experience a warm sensation or loss of audio, please remove and disconnect immediately.
6. Do not place the product near heat sources such as fire, radiators, stoves, light candles and other apparatus that produces heat.
7. Use only those accessories supplied by FINGERS.
8. Unplug the Charging Case once earbuds are fully charged, when unused for long periods of time or during lightning/ thunderstorms.
9. It is recommended to refer all servicing to qualified personnel. Servicing is required when the device has been damaged in any way. Any evidence of any attempt to open and/or alter the device, including any scratch, peeling, puncturing, or removal of any of the labels, will void the Limited Warranty.

CAUTION: Do NOT use earbuds while swimming or shower.
Please note: To prevent rusting, regularly clean the charging pins on the earbuds with a dry, soft cotton swab or equivalent.

In the box

1 x FINGERS Go-Hi Pods2 (Charging Case + TWS Pods)
1 x USB Charging Cable
1 x Quick Start Guide
2 x Extra Ear-gels
1 x Brand Note

How to wear

• Insert the earbud into the ear.
• Tilt and rotate the earbud until it fits comfortably and microphone is pointing at the bottom of ear, towards mouth.

On-board Controls

Charging Case

LED Indication

• It turns white while earbuds are on charge
• While charging case is on charge, LED flashes in red

Earbuds

Soft Touch control function

While grooving to music

Lear bud – Previous Track
Triple Tap| Rear bud – Volume Up
Lear bud – Volume Down

During calls

Charging

With up to 7 hours playback time in the earbuds and 3 times recharges in the charging case, FINGERS Go-Hi Pods2 provides up to 28 hours of playtime.

Earbuds

• The earbuds charge while they are in the Charging Case.
• Place R and L earbuds in the Charging Case the white light will appear on Charging Case, indicating that it is in charging mode.
• The LED disappear when it is fully charged and Charging Case will be switched off to stop charging automatically.
• It takes approximately 30 minutes to fully charge the earbuds.

Charging Case

• Plug the Charging Case into a USB Power Supply using USB Type-C charging cable provided.
• While charging the LED turns red and flashing. Once it is completely charged it turns to solid red.
• Allow up to 1 hour to completely charge the charging case while 1.5 hours for Charging case with earbuds.

Disclaimer: Please use only USB to Type-C cable for charging.

Bluetooth Pairing

TWS Mode

• Take out any of the earbuds from the Charging Case and the earbuds flashes on, once it is switched on.
• The earbud flashes in red and blue alternating, signifying that it is ready to pair a device.
• As it flashes blue and red alternately, make sure that Bluetooth is enabled on your device. Find the device list and select FINGERS Go-Hi Pods2. Once the Bluetooth connection is successful, the earbuds flashes in blue alternately, a sound beep “connected” is heard and it is ready to play.
• Another earbud will get connected with first one automatically as soon as we take it out and power on from the charging station.

Single Earbud

• Take out any one of the earbuds from the Charging Case and the earbud flashes on.
• The earbud flashes in red and blue alternating, signifying that it is ready to pair a device.
• As it flashes blue and red alternately, make sure that Bluetooth is enabled on your device. Find the device list and select
  FINGERS Go-Hi Pods2. Once the Bluetooth connection is successful, the earbud flashes in blue alternately, a sound beep “connected” is heard and it is ready to play.
  Note: Both buds can be connected separately with 2 different mobile phones and can be used as single Ear-bud.

Product Specifications

• Wireless Protocol:
  Bluetooth v5.1

• BT Profiles Supported:
  A2DP, AVRCP, HFP, HSP

• Input Power Rating:
  DC 5.0 V I 300 mA Max.

• Driver unit:
  010 mm

• Effective Frequency Range:
  2.402 – 2.480 GHz

• Effective Range:
  up to 10 m

• Battery Capacity:
  Charging Case: 230 mAh
  Each Earbud: 40 mAh

• Battery Type:
  Li-ion Polymer

• Charging Time:
  Charging Case: Up to 1 hour
  Each Earbud: Up to 30 Minutes

• Playback Time’:
  Up to 7 hours

• TalkTime’:
  Up to 5 hours

• Standby Time:
  100 hours

• On Device Controls:
  MFB – Play/Pause I Next Track/Previous Track Volume Up/Down I Voice Assistant I Call Rec./End

• Dimensions(L x W x H):
  Charging Case: 59.6 x 25.8 x 45.5 mm (L x W x H) Earbuds: 26 x 16 x 31.8 mm (L x W x H)

• Weight:
  Charging Case: 35 g
  Earbuds: 4 g each

• Colour:
  Black

• Supplementary features:
  Dual Support: Single Earbud and Double as TWS
  Fast Charging*: 10 mins Charge = 3 hours Music!
  Sweat proof’
  oice Assistant (on default OS)
  Type-C port for fast charging
  3 times additional charges

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>