ZERO STATIK VIBIN ZS-VIBIN-SPKR Light Up Speaker User Manual

ZERO STATIK VIBIN ZS-VIBIN-SPKR Light Up Speaker

Product Information

The product is a speaker that can be charged using a Micro USB cable. It has an ON/OFF switch, LED indicator, TF card slot, USB port, and micro USB charging port. The speaker can be controlled using the following buttons:

1. MODE
2. PREVIOUS TRACK/ VOLUME DOWN
3. NEXT TRACK/ VOLUME UP
4. PLAY/ PAUSE

Product Usage Instructions

To use the speaker, follow these steps:

1. Use the included Micro USB cable to fully charge the speaker for a minimum of 3 hours. When charging, the LED indicator turns red.
2. Flip the ON/OFF switch to the ON position.
3. Use the MODE button to select the desired mode.
4. Use the PREVIOUS TRACK/ VOLUME DOWN button to decrease the volume or go to the previous track.
5. Use the NEXT TRACK/VOLUME-UP button to increase volume or go to the next track.
6. Use the PLAY/ PAUSE button to play or pause music.
7. Insert a TF card into the TF CARD SLOT to play music from the card.
8. Connect a device to the speaker using the USB port.
9. To charge the speaker, connect the Micro USB cable to the MICRO USB CHARGING PORT.

SAFETY & CARE INSTRUCTIONS

• Do NOT expose any portion of this product to liquid, humidity, moisture, sharp objects or extreme temperatures as this can damage it and void the warranty.
• Do NOT attempt to disassemble or modify this product in any way. Spot Clean ONLY.
• Keep out of reach of children.
• This product is not a toy.

Specification

CONTENTS

• 1 x Bluetooth Speaker
• 1 x Charging Cable
• 1 x User Manual

CHARGING & POWERING ON YOUR VIBIN SPEAKER

1. Use the included Micro USB cable to fully charge the speaker for a minimum of 3 hours. When charging the LED indicator turns red.
2. Flip the ON/OFF switch to the ON position.

BLUETOOTH PAIRING WITH YOUR DEVICE

1. Once powered on, the speaker will automatically into PAIRING MODE the
   The LED will flash BLUE indicating it is in paring mode.

2. Pairing mode will last for 2 minutes.
   While in pairing mode, turn ON the Bluetooth Connection on your device, Scan/Search & select VIBIN

3. Once paired successfully, the LED the indicator will be a solid blue to indicate it is paired to your device.

TECHNICAL SUPPORT & WARRANTY INFO

This product is backed by a One Year Warranty from any defects. For warranty replacements, or questions or if you have any issues about this product, contact us at
help@SimplyTechCorp.com. SimplyTech Electronics Inc declared that
radio equipment is compliant with Directive 2014/53/EU.
EU Declaration of Conformity for this product can be viewed at www .SimplyTech-Corp.com/docs.
DISTRIBUTED BY: SimplyTech Electronics,
Inc. 1407 Broadway New York, NY 10018
MADE IN CHINA
Please read before using this product and retain the manual for future reference.

FCC Caution:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed
and operated with a minimum distance 20cm between the radiator& your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>