GTRS Wing 900 Intelligent Guitar Owner’s Manual
- June 10, 2024
- GTRS
Table of Contents
GTRS Wing 900 Intelligent Guitar
IntelligentGuitar Owner’s Manual
Product Information
The IntelligentGuitar is a guitar with wireless signal transfer module. It has different versions for different countries and areas to meet statutory and regulatory requirements. The device should be purchased from authorized local distributors to prevent legal risks. The unit should not be modified without authorization from MOOER support team.
Precautions
Power Supply
- Avoid exposing the unit to direct sunlight, heat sources, excessive dust or dirt, magnetic fields, extreme temperature or humidity, high humidity or moisture, strong vibrations or shocks.
Cleaning
- Clean the unit only with a soft, dry cloth. If necessary,slightly moisten the cloth. Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax, solvents, cleaning fluids or chemical-impregnated wiping cloths.
Operations
- Do not toggle the switch or rotate the knob heavily.
- Do not let the papers scraps, metal debris or other sundries fall inside the unit.
- Do not let the unit fall from a high level or push/strike the unit heavily.
Warning
- If the battery emits a strange smell or makes a strange noise,please stop using or charging it and contact the manufacturer immediately for repair. Do not dismantle the unit manually.
- The device has a wireless signal transfer module. To avoid interference to biological or medical measurement devices, please do not use the unit in a hospital.
Quick Tour
There is no information provided in the manual regarding the quick tour.
Instructions
There is no information provided in the manual regarding instructions.
Specifications
The specifications of the IntelligentGuitar are not provided in this manual. Please refer to the product packaging or contact the manufacturer for further information.
PRECAUTIONS
Power Supply
- Please use a power supply that meets the requirements of local laws and regulations(UL, CSA, VDE, CCC).
Please use a power supply that can meet the power requirements of the manufacturer.
Please unplug power supply while idle or during thunderstorm. Please do not expose the device with battery to exterme heat (avoid direct sunlight or fire)
If the battery is broken and leaks, please do not expose your skin or eye to the contaminate.
Please consult a doctor immediately in the event of exposure.
The battery of the device could explode or cause chemical damage if it is handled incorrectly.
Location
- To avoid deformation, discoloration, or other serious damage, do not expose this unit to the following conditions:
- Direct sunlight
- Heat sources
- Excessive dusty or dirty locations
- Magnetic fields
- Extreme temperature or humidity
- High humidity or moisture
- Strong vibrations or shocks
Cleaning
Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth.
Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax, solvents,
cleaning fluids, or chemical-impregnated wiping cloths.
Operations
Please do not toggle the switch or rotate the knob heavily.
Please do not let the paper scraps, metal debris, or other sundries fall
inside the unit.
Please do not let the unit fall from a high level, or push/strike the unit
heavily.
Warning
- Please stop using or charging if the battery becomes smelly or emits a strange noise. Contact the manufacturer immediately for repair. Please do not dismantle the unit manually.
- The device has a wireless signal transfer module. To avoid interference to biological or medical measurement devices, please do not use the unit in a hospital.
- According to the statutory and regulatory requirements, please purchase the unit from our authorized local distributors, to prevent from the legal risk of using the unit sold to overseas area.
- To meet the statutory and regulatory requirements of different countries or areas, the unit has different versions in different countries and areas. Different versions cannot match with each other. To avoid unexpected issues, please purchase the unit from our authorized distributors in your country or area.
- Please do not modify the unit without authorization. For detailed information, please contact MOOER support team.
LAYOUT
- GTRS control knob
- 6.35mm guitar line/headphone output
- USB Type-C port (power requirement is 5V 2A)
- Battery compartment（ Utilize needle to open the battery compartment）
- Lithium-ion battery (GLP-1)（ Please ensure the GTRS logo is placed as shown when placing battery）
Please ensure the GTRS logo is placed as shown when placing battery
QUICK TOUR
Step 1: Connect your GTRS guitar to amplifier or headphones. You can set the output mode properly in the GTRS App—Setting—Global—Output Mode menu.
Step 2: Rotate the GTRS control knob clockwise to turn the guitar on.
The knob LED will indicate on/off status
Step 3: Press the GTRS control knob to switch between different preset tones
Step 4: Rotate the GTRS knob to adjust the output volume level to your preference
INSTRUCTIONS
GTRS App
The GTRS App functions as the editor software for the GTRS guitar.
Users can easily select effects and create presets for the GTRS system,
download and share tones to the cloud, and update the firmware of their GTRS
guitar. Several tools for practice are included in the app as well.
-
Get the GTRS App
You can download GTRS App from App Store (iOS, iPad OS), Google Play (Android), or GTRS official website. -
Activation
Open the Bluetooth menu of your smart phone or tablet and search for “GTRS” to connect your guitar via Bluetooth. After connecting, a QR code scanner will display in the app. Use the APP to scan the bar code on the last page of your owner’s manual, or the bar code on the package, to finish activation and registration. The serial number and warranty of your GTRS guitar will automatically be registered as part of the activation process.
Notice: This procedure is only for GTRS guitars which have not yet been activated. An activated guitar will skip this procedure. Please ensure the GTRS guitar is on and your smart phone network connection is stable during activation. -
Guide
Click the “?” icon in the top right corner of the app screen to access the quick guide/manual of the GTRS App.
Super Knob
-
Preset Mode
Press to switch between four different tone presets. The color of the LED will change in order of dark blue, purple, orange, and sky blue. -
Guitar Simulation Mode
Press to switch the guitar simulation on. The purple LED indicates the guitar simulation is on while sky blue indicates the guitar simulation is turned off. -
Switch Mode. The guitar will begin in Preset Mode by default.
You can assign defaults through:
GTRS APP ‒ Settings ‒ Global – GTRS control.
Tuner
When the APP or wireless footswitch is connected, press and hold the GTRS knob
to access the tuner. The GTRS knob LED will turn yellow. Press the knob again
to exit the tuner.
Low battery alert
To provide the best experience for users, the GTRS knob will blink slowly when
the battery level is getting low. Please charge your GTRS battery as soon as
possible to maintain the battery life of your unit.
Charging
The lithium-ion battery in the GTRS system can be charged through the Type-C
USB port from the power supply. While charging, the GTRS knob LED will turn
red no matter which mode it is in. A green LED indicates a full charge.
GWF4 Wireless Footswitch (purchased separately)
The wireless footswitch can be used with GWF-4 for better control of presets
during live performance. Please see the wireless footswitch manual for more
information.
Bluetooth
Open the Bluetooth menu of your smart phone or tablet and search for “GTRS” to
connect via Bluetooth. Users can use the Bluetooth function to play audio
tracks from a mobile device mixed with the GTRS guitar signal and send that
signal through the main output of the GTRS guitar.
Wireless System
The intelligent module of the GTRS 900 or higher version series has an
integrated 4 channels wireless system, which can pair with GTRSPTNR wireless
series extended modules providing more possibilities for play.
Note: GTRSPTNR GWU4 receiver is included in the package.
GTRSPTNR GWU4 receiver is included as an accessory.
Notes: To meet the statutory and regulatory requirements of different
countries or areas, the transmitter unit in the GTRS 900 series has different
versions in different countries and areas.
Different versions of transmitter and receiver unit cannot match with each
other. You can check the version information of the transmitter in the
package, tag, or the Wireless Menu in the GTRS
App; the version information of receiver is listed on the back of the
Live Stream/Direct Recording
Connect your mobile device to the GTRS guitar through the Type-C USB port. The
guitar signal will go directly to the mobile device to facilitate direct
recording or live streaming. The signal output level can be controlled by the
MASTER volume control knob. In addition,the volume level of the USB-OTG
signal, Bluetooth audio playback signal, and the guitar/headphone output
signal can be adjusted individually through the GTRS App.
Note: Please make sure GTRS Intelligent Processor System is turned on when use the Live steam/Direct Recording feature. If you like to record with your mobile device, please make sure the OTG cable is match your mobile device.
Traditional Guitar Mode
If GTRS is off, or if the battery life is low, the output signal of the guitar
will switch to true bypass and function as a traditional guitar would. Only
the volume knob, tone knob, and pickup switch can affect the tone of the
guitar. In this mode, the guitar cannot support headphone output.
SPECIFICATIONS
- Battery: GLP-1 rechargeable lithium battery (4000mAh)
- Battery Life: 12 hours/9 hours (Wireless transmitter in use)
- Charging time: 4 hours
- Charging Requirement: DC5V 2A
- USB Port: USB TYPE-C
- Bluetooth Version: 5.0
- Wireless Control: 2.4G
- Wireless Transmitter: UHF
- Channels: 4
- Distance: 15m
- Latency: ≤0.3ms
- Frequency Response: 20Hz-20KHz
- Input Dynamic: ＞105 dB
- SNR: 103dB
- THD: ＜0.15%
Caution:
- The transfer distance is based on laboratory environment, without any obstacle for pairing with GTRSPTNR GWU4 receiver. The actual transmission distance can depend on interference types, reflection, and absorption from obstacles in the user’s environment.
- GTRS GLP-1 supports overcharging protection, over-discharging protection, short circuit protection, overcurrent protection.
- Recommend to charge the battery every three months as a fully charged battery; charge the empty battery every month for maintenance.
- The battery life will be around 75% of the original after 300 times of charging circuit.
- The suitable charging temperature is 0-45℃; storge temperature is 25°c±5°c.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>