GPI LPR CAM Single Lens User Guide
- June 10, 2024
- GPI
Table of Contents
LPR CAM Single Lens
User Guide Global Shutter
Single Lens LPR CAM
Quick Guide
LPR CAM Single Lens
Ver 2.0 Support the multi browser like Chrome, Edge and so on from the firmware version “4.51-254-rp_GPCR_MB”
Overview
IP Installer
In order to have the camera viewable on the network, IP address has to be assigned first. When a user double clicks IP Installer Plus.exe file which a software downloaded from the web page will help to search IP camera and change the IP address easily.
- SEARCH : Enable to search IP cameras in the network and display the list of searched cameras.
- ALL CLEAR : Displayed cameras are all cleared.
- IP SETUP : After Search, select the displayed camera and click “IP SETUP” to change IP address, Gateway and Net Mask.
- WEB : Go to the web viewer page for the selected camera.
- UPDATE : Firmware can be updated. Before updating, please load firmware from PC.
- FILTER : Search IP camera by MAC address or IP range.
Default IP Address
Factory default value of IP camera is like below.
- IP : 192.168.0.100
- SM : 255.255.255.0
- GW : 192.168.0.1
When you connect IP camera and PC directly, please assign the IP address of PC by choosing any numbers from 2 to 254 except “100” as shown below.
- IP : 192.168.0.150
- SM : 255.255.255.0
- GW : 192.168.0.1
After connection, allow to install ActiveX (Web Live Player software) on PC.
For the installation of ActiveX, please refer to the following page.
※ Available OS : XP, VISTA, WIN 7/8/10/11(32/64bit)
LIVE VIEW
ActiveX(Web Live Player) Installation 1 Double click the searched model. 2 Click ‘Live View’ to start monitoring the video
streaming.
6 Monitoring
the video stream in live. 1 Click ‘Admin’ to get into the camera setting.The video quality can be different
according to “Target Bitrate”. The default setting is “8Mbps”.
RECOMMENDED Video & Device/Camera Settings
*** After Night Mode setting is done, return to Default(Day) and click “Apply” button again.
RTSP Connection – VLC Media Player
Primary
Streaming (h264, H265) : rtsp://192.168.0.100/cam0_0
Secondary Streaming (h264, H265) : rtsp://192.168.0.100/cam0_1
Tertiary Streaming (h264, H265) : rtsp://192.168.0.100/cam0_2
ONVIF Device Manager
Onvif Device manager (ID : root , Password : root)