GPI Dual Lens ANPR Camera User Guide
- June 9, 2024
- GPI
Table of Contents
GPI Dual Lens ANPR Camera
Installation
- Connecting Main Cable
- Connecting DC 12V Power
- Connecting Network Cable to ANPR Device
IP Installer
In order to have the camera viewable on the network, IP address has to be assigned first. When a user double clicks IP Installer Plus.exe file which a software downloaded from the web page will help to search IP camera and change the IP address easily.
- SEARCH : Enable to search IP cameras in the network and display the list of searched cameras.
- ALL CLEAR : Displayed cameras are all cleared.
- IP SETUP : After Search, select the displayed camera and click “IP SETUP” to change IP address, Gateway and Net Mask.
- WEB : Go to the web viewer page for the selected camera.
- UPDATE : Firmware can be updated. Before updating, please load firmware from PC.
- FILTER : Search IP camera by MAC address or IP range.
Default IP Address
Factory default value of IP camera is like below.
When you connect IP camera and PC directly, please assign the IP address of PC by choosing any numbers from 2 to 254 except “100” & “101” as shown below.
AvailableOS : XP, VISTA, WIN 7/8/10/11(32/64bit)
LIVE VIEW
Searching the camera
- Double click the searched model.
- Click ‘Live View’ to start monitoring the video streaming.
LIVE VIEW
Monitoring the video stream in live.
WEB SETTING FOR B/W(LPR)
Click ‘Admin’ to get into the camera setting.
The video quality can be different according to “Target Bitrate”. The default setting is “8Mbps”.
Recommended Video & Device/Camera Settings B/W (LPR) –Day Mode
Recommended Video & Device/Camera Settings B/W (LPR) –Night Mode
After Night Mode setting is done, return to Default(Day) and click “Apply” button again.
WEB SETTING FOR COLOR(OVERVIEW)
Click ‘Admin’ to get into the camera setting.
The video quality can be different according to “Target Bitrate”. The default setting is “6Mbps”.
Recommended Video & Device/Camera Settings For Color (Overview)
Recommended Video & Device/Camera Settings For Color (Overview)
B/W (LPR)
- Primary Streaming (h264, H265) : rtsp://192.168.0.100/cam0_0
- Secondary Streaming (h264, H265) : rtsp://192.168.0.100/cam0_1
- Tertiary Streaming (h264, H265) : rtsp://192.168.0.100/cam0_2 12 Color (Overview)
- Primary Streaming (h264, H265) : rtsp://192.168.0.101/cam0_0
- Secondary Streaming (h264, H265) : rtsp://192.168.0.101/cam0_1
- Tertiary Streaming (h264, H265) : rtsp://192.168.0.101/cam0_2
- Tertiary Streaming (MJPEG) : rtsp://192.168.0.101/cam0_3
ONVIF Device Manager
OnvifDevice manager (ID : root , Password : root)
OnvifProtocol Version: Profile S
Dimension
