PRODIGY AutoCode Blood Glucose Monitoring System User Guide
- June 10, 2024
- prodigy
Table of Contents
PRODIGY AutoCode Blood Glucose Monitoring System User Guide
Simple 3-Step Testing
Step 1: Insert the Test Strip
Turn on the meter by inserting the test strip. No Coding required.
“Your Prodigy®
meter is on. Please apply blood to the test strip.”
Step 2: Apply Blood
Apply a tiny blood sample when the appears on the display. The meter beeps and then counts down from 6 to 1.
“Now testing.”
Step 3: Hear Results
Hear and see your accurate results in 7 seconds.
“Your blood
glucose 6.6 millimoles per liter.”
Recalling Test Results
With the meter turned off, press the “M” button twice. The 7-day average will appear, indicating that you are in the memory mode.
If you continue to press the “M” button, the 7, 14 and 28-day averages will
appear. After the averages, you can then review the individual test results
(450 maximum) stored in the memory.
Confirmation Window
With the test strip inserted, bring the meter close to your finger or other test site and place beside the blood drop. Blood is automatically drawn into the absorbent channel once the test strip is close enough to the blood drop. DO NOT smear blood onto the test strip or place the blood on top of the test strip.
For Customer Care call: 1.800.243.2636
www.prodigymeter.com
Costumer Support :
Prodigy Diabetes Care, LLC
P.O. Box 481928
Charlotte, North Carolina 28269 USA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>