KJI EU-KJ86000 Reaper Grip User Manual
- June 10, 2024
- KJI
Table of Contents
KJI EU-KJ86000 Reaper Grip
Product Information
Reaper Grip The Reaper Grip is a versatile tripod-mounted gun rest system manufactured by KJI. It is designed to provide stability and support to your firearm while shooting. The grip features a control arm, mounting base, drag adjustment knob, hinge block, grip adjustment knob, fixed curved grip, pivoting curved grip, saddle clamp 1, dowel pin cover, and locking pin. The grip is made of heavy-duty construction material and has a vise width range of 4cm to 7.1cm. The product dimensions are not specified.
Technical Specifications
- Brand Name: KJI
- Model Name: Reaper Grip System
- Category Name: Gun Rests
- SKU Number: EU-KJ86000
- UPC Number: 812495029394
- Material: Heavy-duty construction
- Vise width range: 4cm to 7.1cm
- Pan rotation angle: Not specified
- Vertical Rotation Angle: Not specified
- Mounting: Tripod-mounted
- Weight: Not specified
Included Accessories
- Camera thread adapter
Related Accessories
- KJI K700 AMT Tripod (EU-KJ85001)
- KJI K800 CF Tripod (EU-KJ85002)
- KJI Ambush Support Assembly (EU-KJ85005)
- KJI Ambush Shooting Rest Kit (EU-KJ85005K)
- KJI Replacement Grip Sleeves (EU-KJ89004)
- KJI Reaper Rig Accessory Plate (EU-KJ89002)
Features
- Smooth Pan/Tilt
- Heavy Duty Construction
- Locking
For more information about warranty details, please visit www.KJIprecision.com.
Product Usage Instructions
Reaper Grip Before handling the Reaper Grip, it is recommended to read and understand the contents of your tripod manual, as well as the KJI Reaper Grip manual. Follow these safety precautions while using the product:
- Transport the grip carefully.
Assembly The Reaper Grip can be attached to tripods or other mounting fixtures. To attach:
- Unlock the grip by turning the locking pin.
- Attach the mounting base to the tripod or other mounting fixture.
- Lock the grip by turning the locking pin.
Drag Adjustment The drag adjustment knob is located opposite the locking
pin.
The Reaper Grip is designed to enhance panning. To adjust:
- Turn the drag adjustment knob to increase or decrease drag.
Reverse Handing for Left-handed Shooters The Reaper Grip is shipped in a right-handed shooter orientation. For left-handed shooters:
-
Remove the four Allen screws from the grip’s control handle
assembly using a 5/32 Allen wrench. -
Rotate the grip 180 degrees.
-
Re-install the four screws.
Securing a Stock or Chassis in the Grip To secure a stock or chassis in the grip:
- Adjust the grip to fit the vise width of the stock or chassis.
- Place the stock or chassis in the grip.
- Tighten the grip adjustment knob to secure the stock or chassis.
KJI Replacement Grip Sleeve If the grip sleeve begins to wear down, a replacement grip sleeve (EU-KJ89004) can be purchased. To replace:
- Slide off the old rubber grip sleeve.
- Slide on the new sleeve.
KJI REAPER GRIP USER MANUAL
Thank you for choosing KJI, the world’s best, most versatile tripod-mounted
gun rest system. Every ounce of product knowledge you need to become a KJI
Reaper Grip expert is contained in these few pages—the rest is just triggered
time. Welcome to our ranks.
DIAGRAM
- Control Arm
- Mounting Base
- Drag Adjustment Knob
- Hinge Block
- Grip Adjustment Knob
- Fixed Curved Grip
- Pivoting Curved Grip
- Saddle Clamp
- Dowel Pin Cover (only remove to clean)
- Locking Pin
ASSEMBLY
- Your Reaper Grip comes in a slightly disassembled form. To assemble, simply screw the control arm into the saddle clamp. The contrite control arol arm is rm is recoverers tse thrhreadedeaded. Do not over-tighten. Locking the Reaper Grip into position takes minimal torque. Overtightening the control arm may damage your
- Reaper Grip. Your Reaper Grip is now assembled and ready to attach to a tripod or other mounting fixture like the KJI Ambush. Your Reaper Grip is equipped with a 3/8-16” threaded hole on the underside of the hinge block. If your tripod or mounting fixture requires ¼-20 threading, your Reaper Grip includes an adapter. Once you ensure your thread patterns match, you are ready to mount the Reaper Grip.
ATTACHING TO TRIPODS OR OTHER MOUNTING FIXTURES
- The Reaper Grip is equipped with a locking pin to prevent rotation of the base when attaching or removing the Reaper Grip from a tripod or other mounting fixture. To mount the Reaper Grip to the tripod, you first need to ensure the locking pin is engaged and in the locked position. To do this, rotate the hinge block while holding onto the base plate.
- You should hear an audible click when the locking pin engages in one of the four stops.
- These stops are located in 90-degree increments.
- You should now be unable to independently twist the base plate from the hinge block. After locking the base plate, you can now tighten the Reaper Grip to the tripod.
- Once you have firmly mounted the Reaper Grip to the tripod, disengage the locking pin by pulling the knob out and slightly rotating it in either direction.
DRAG ADJUSTMENT (PANNING)
- Opposite the locking pin, you will find the Drag Adjustment Knob. The Reaper Grip is designed to enhance engagements with stationary targets, as well as tracking moving targets. As such, the horizontal pan was not designed to completely lock down. The drag adjustment knob is constructed of a nylon tip to create a smooth horizontal pan that can increase or decrease the resistance of the horizontal motion. Tighten the drag adjustment knob (clockwise) to increase drag (passive resistance). Loosen the knob (counterclockwise) to decrease resistance. Do not overtighten the drag knob. Doing so may damage your Reaper Grip.
REVERSE HANDING FOR LEFT-HANDED SHOOTERS
- The Reaper Grip is shipped in a right-handed shooter orientation. For left-handed shooters, simply remove the four allen screws from the grip’s control handle assembly by using a 5/32” allen wrench. Rotate the grip 180 degrees and re-install the four screws.
SECURING A STOCK OR CHASSIS IN THE GRIP
- To secure a stock or chassis in the Reaper Grip, set the stock down into the Grip just forward of your magazine compartment (this prevents obstructions of rifle components you may need to access). Hold the rifle so the stock or chassis is resting completely at the base of the grip. Tighten the grip knob until the rifle is secure. The
- Grip pivots to accommodate tapered stocks and chassis. The tops of the grips also curve inward slightly, toward the interior of the grip. The curved grip is designed to pull and hold the stock or chassis down into the bottom of the grip.
KJI REPLKJI REPLAACEMENTCEMENT GRIP SLEEVEGRIP SLEEVE
- If your grip begins to wear down, you can purchase a replacement grip sleeve (EU-KJ89004.) Simply slide off the old rubber grip sleeve and replace it with the new sleeve.
- Please visit www.KJIprecision.com for warranty details and information
WARNING
- Before handling the Reaper Grip, read and understand the contents of your tripod manual, as well as this KJI Reaper Grip manual. Follow these safety precautions:
- Never leave a loaded firearm in the rest without maintaining positive physical control over the shooting system.
- Do not exceed your tripod’s maximum load capacity. (see your tripod manual)
- Ensure the Reaper Grip is fastened tightly to your tripod.
- Ensure your firearm is gripped tightly and is secured at the bottom of the grip assembly.
- Always remove your firearm and accessories from the Reaper Grip during setup and before transporting.
MAINTENANCE
- To clean the stainless steel dowel pin, remove the dowel pin cover and loosen or remove the control arm. Ensure the direct mount plate is perpendicular to the top of the hinge block so that the grip adjust-ment bolt is centered on the recessed channel (at the top of the hinge block) and pull the saddle clamp (away from the hinge block) off of the dowel pin. Wipe away debris from the dowel pin. Re-install the saddle clamp on the dowel pin. Re-install the dowel pin cover. Re-install the control arm.
- Do not use lubricants or grease on the stainless steel dowel pin
- Use standard lubricant or grease on the control arm threads as necessary
GENERAL DESCRIPTION
Brand Name| KJI
Model Name| Reaper Grip System
Category Name| Gun Rests
SKU Number| EU-KJ86000
TECHNICAL SPECIFICATIONS
UPC Number | 812495029394 |
---|
TECHNICAL SPECIFICATIONS
Dimensions, in/mm| 6,84 x 6,04 x 6,57 / 174 x 153 x 167
Material| Aluminum
Vise width range, in/mm| 1,5 – 2,9 / 40 – 71
Pan rotation angle| 360°
Vertical Rotation Angle| 87° Down , 21° Up
Mounting| 3/8” – 16 Threaded Hole
Weight, lbs/g| 0,67 / 306
INCLUDED ACCESSORIES|
| Camera thread adapter
RELATED ACCESSORIES|
| EU-KJ85001 KJI K700 AMT Tripod
| EU-KJ85002 KJI K800 CF Tripod
| EU-KJ85005 KJI Ambush Support Assembly
| EU-KJ85005K KJI Ambush Shooting Rest Kit
| EU-KJ89004 KJI Replacement Grip Sleeves
| EU-KJ89002 KJI Reaper Rig Accessory Plate
FEATURES|
| Smooth Pan/Tilt
| Heavy Duty Construction
| Locking 4cm – 7,1cm firearm grip
Documents / Resources
| KJI
EU-KJ86000 Reaper
Grip
[pdf] User Manual
EU-KJ86000 Reaper Grip, EU-KJ86000, Reaper Grip, Grip
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>