Kaadas KBRZ07 Smart Door Lock User Guide
- June 10, 2024
- Kaadas
Table of Contents
KBRZ07 Smart Door Lock
Product Information
The KBRZ07 Smart Lock is a device designed to provide secure
access to your home or office. It features license-exempt
transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s license-exempt RSS(s). The device
complies with part 15 of the FCC Rules and should be installed and
operated with a minimum distance of 20cm between the radiator and
your body.
Product Usage Instructions
Before using the KBRZ07 Smart Lock, please ensure that you have
read and understood the installation instructions and user guide
provided.
1. Install the lock according to the instructions provided in
the user guide.
2. Ensure that the minimum distance of 20cm is maintained
between the radiator and your body during operation.
3. To operate the lock, use the provided key or enter the
correct passcode on the keypad. The lock will then unlock, allowing
you to gain access.
4. Ensure that any changes or modifications to the device are
explicitly approved by the manufacturer to avoid voiding your
authority to operate the equipment.
5. If you experience any issues with the lock, refer to the
troubleshooting section of the user guide or contact customer
support for assistance.
By following these usage instructions, you can ensure safe and
effective operation of the KBRZ07 Smart Lock.
KBRZ07
Smart Lock
Installation Instction I User Guide
4 7
hB
4
u
B B
Thankyou ror png our pUCw hmanlhlyhJrurd .cluinthiUI are forill’purpaonly. Adualproducty db pruduct u
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
ISED Statement
English: This device contains licence-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development Canada’s licence-
exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device. The digital apparatus complies with
Canadian CAN ICES3 (B)/NMB3(B). French: Cet appareil contient des
émetteurs/récepteurs exempts de licence qui sont conformes aux RSS exemptés de
licence d’Innovation, Sciences et Développement économique Canada.
L’exploitation est soumise aux deux conditions suivantes :
(1) Cet appareil ne doit pas provoquer d’interférences.
(2) Cet appareil doit accepter toute interférence, y compris les interférences
susceptibles de provoquer un fonctionnement indésirable de l’appareil.
l’appareil numérique du ciem conforme canadien peut3 (b) / nmb3 (b). This
device meets the exemption from the routine evaluation limits in section 2.5
of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian
information on RF exposure and compliance.
cet appareil est conforme à l’exemption des limites d’évaluation courante dans
la section 2.5 du cnr – 102 et conformité avec rss 102 de l’exposition aux rf,
les utilisateurs peuvent obtenir des données canadiennes sur l’exposition aux
champs rf et la conformité.
This equipment complies with Canada radiation exposure limits set forth for an
uncontrolled environment.
Cet équipement est conforme aux limites d’exposition aux rayonnements du
Canada établies pour un environnement non contrôlé.
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Cet équipement doit être installé et utilisé à une distance minimale de 20 cm
entre le radiateur et votre corps.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>