MOZA Nano SE Selfie Gimbal Extendable Smartphone Gimbal User Manual

: June 10, 2024
: Moza

Nano SE Selfie Gimbal Extendable Smartphone Gimbal

MOZA-Nano-SE-Selfie-Gimbal-Extendable-Smartphone-Gimbal-
fig-1

NANO SE Product Information

The NANO SE is a smartphone gimbal that allows users to stabilize and control the movement of their phone while shooting videos or taking photos. It comes with a remote controller and is compatible with the MOZA Genie App, which provides advanced features such as Magic mode, time-lapse photography, and real-time high-definition image display.

Disclaimer and Warning
Before using the NANO SE, please read the safety guidelines and warnings provided in the user manual carefully to avoid unnecessary damage or harm.

Mini MX Overview

The NANO SE includes a phone holder lock, Bluetooth indicator, battery indicator, power button, knob, telescopic rod, remote controller, bracket, tripod, M button (top button), indicator, – button (left button), + button (right button), record button, and down button.

Preparation
To use the NANO SE, users must download the MOZA Genie App on their smartphone. The app is available on both iOS and Android platforms and requires iOS 10.0 or later or Android 6.0 or later. Users can scan the QR code provided in the user manual or search and download the app from the app store.

Tutorial
Users can access video tutorials on the MOZA official YouTube channel or contact technical support for assistance.

Product Usage Instructions

Unfold and Unlock NANO SE
To use the NANO SE, unfold it as shown in the user manual and adjust the angle according to your shooting needs.

Install and Balance the Phone
Before turning on the gimbal, install the mobile phone into the phone clip, making sure it is positioned near the middle of the phone. Then adjust the balance of the portrait and landscape modes respectively. To maintain balance, adjust the position of the phone in the clip when switching between portrait and landscape shooting orientations.

Attention
Install the mobile phone before turning on the gimbal to avoid any damage. The battery life of the NANO SE is limited, so users should charge it fully before use.

Buttons and Ports

Power Button
Long press for 3s: Power On/Off – long press the power button to turn on NANO SE. When the gimbal is turned on, long press the power button again to turn it off. Short press for 0.5s: Sleep Mode/Wake Up

Remote Control
M Button (Top Button) Click : Switch between horizontal and vertical shooting modes. Double click: Switch between Follow and Lock mode. Press and hold the M button (top button), then quickly triple-click the + button (right button) : Reset Bluetooth. When the mobile phone cannot search NANO SE or Bluetooth connection is failed, NANO SE Bluetooth needs to be reset.

Button Functions of the Remote Controller when Connected with App or

Native Camera

Button| M Button (Top Button)| Record Button (Down Button)| + Button (Right Button)| – Button (Left Button)
---|---|---|---|---
Operation| Triple click| Click| Double click| Click
Genie App Function| Switch between front and rear camera| Start/Stop Recording| Shooting/Recording| Magic Video: move to next mode

By following the instructions provided in the user manual, users can get the best experience while using the NANO SE and avoid any unnecessary damage to the product.

Disclaimer and Warning

This document is related to the safety use and legal rights of your equipment. Please read it carefully before the first use.
By using this product, you are deemed to have read, understood, endorsed and accepted all the terms and content of this statement. You are solely responsible for the use of this product and the consequences thereof. You undertake to use this product for legitimate purposes and agree to the terms and any relevant regulations, policies and guidelines formulated by Shenzhen Alza Technology Co., Ltd. (hereinafter referred to as Alza). Alza is not responsible for damage, injury or any legal problems caused by the direct or indirect use of this product. Users should follow all safety guidelines including but not limited to this document.
Mini-MX is professional videography equipment. Users need to have professional videography and safety knowledge and need to be careful. Please read the user manual carefully before the first use.
This product is not a toy and not suitable for use by minors. Do not allow children to operate this product.
Do not use with products or accessories that are not provided or recommended by Alza, and please strictly follow the safety guidelines in the product manual.
The final interpretation of this document belongs to Shenzhen Alza Technology Co., Ltd. Updates are subject to change without notice. Please visit the official website www.gudsen.com for the latest product

Safety Guidelines Warning

Do not expose the product to any liquid, do not immerse the product in water or get it wet. Do not use the product in rain or humid environments. Corrosion may occur when the inside of the product is exposed to water, which may cause spontaneous combustion of the battery and may even cause an explosion.
If the product catches fire, please use water, water mist, sand, fire blanket, dry powder, carbon dioxide fire extinguisher to extinguish the fire immediately. Select the fire extinguishing method in the above recommended order according to the actual situation.
Use the product in an environment where the temperature is between 0°C and 40°C
Do not disassemble the product in any way. If the battery is pierced during disassembly, it will cause the electrolyte inside the battery to leak, and even cause fire or explosion.
Do not hit, crush or throw the product. Do not place heavy objects on the product.
Do not heat the product. Do not put the product in a microwave oven or pressure cooker.
Do not put the product near a heat source (stove or heater, etc.) or leave the product in a car on a hot day. Do not store the product in an environment above 60°C. The ideal storage environment temperature is 22°C to 28°C. The gimbal will not be able to resume use when exposed to these extreme temperatures.

Mini MX Overview

Phone Holder Lock
Bluetooth Indicator
Battery Indicator
Power Button
Knob
Telescopic Rod
Remote Controller
Bracket
Tripod
M Button (Top Button)
Remote Controller
Indicator
-Button (Left Button)
+Button (Right Button)
Record Button
(Down Button)

Preparation

App download
MOZA NANO SE, in conjunction with the MOZA Genie App, displays high-definition images in real time on your device, recording, shooting, gimbal settings, using advanced features such as Magic mode, time-lapse photography, and more. Scan the QR code below or search and download “MOZA Genie” in the app store. Note

System requirements: iOS 10.0 or later, Android 6.0 or later
iOS users: scan the QR code to download or download on App store
Android users: download in Google Play
Tutorial
Access video tutorials on MOZA official YouTube channel.
https://www.youtube.com/channel/UCHBIF5mblt4W0iPRKzU6qPA
Hotline: 0016467400973
Technical Support: support@gudsen.com

Notes

Before using the NANO SE for the first time, charge the product fully. Disconnect the product from the charger after charging is completed.
Put the phone holder in the unlocked position and install the phone to NANO SE before turning it on.
If the battery indicator shows only 1 bar, it means the battery is too low, charge the unit as soon as possible.
NANO SE is not waterproof. Please do not expose NANO SE to any liquids. Do not touch it with wet hands. Clean it with a soft dry cloth.
When not in use for a long time, please turn off the NANO SE’s power supply, charge and discharge every 3 months to ensure the battery activity.
If you do not use the product for more than 10 days, please discharge its battery to 40%-65% and store it to extend the battery life. To avoid core damage, do not store the battery for long periods of time after it has been completely discharged.
NANO SE is a high-precision control device. Drops or blunt force trauma caused by external forces can damage the NANO SE and cause functional issues.
After the NANO SE is powered on, make sure that nothing is blocking its ability to rotate fully.

Unfold and Unlock NANO SE
Unfold NANO SE as shown, adjust the angle according to your shooting needs. Turn the phone clip clockwise 90° to unlock the roll motor.

Install and Balance the Phone
In the NANO SE’s shutdown state, open the phone clip and install the phone. The phone clip should be near the middle of the phone. Then adjust the balance of the portrait and landscape, respectively. To maintain balance, adjust the position of the phone in the clip when switching between portrait and landscape shooting orientations.
Attention

Install the mobile phone before turning on the gimbal. Battery life of the NANO SE is affected by the balance of the mobile phone. If the phone is slightly unbalanced the gimbal may still be functional but movies will be less stabilized and more battery power will be required.
The roll axis can rotate up to 270°, exceeding this limit may cause damage to the gimbal.
NANO SE will vibrate slightly when the phone is not detected, and will enter the standby mode. After the mobile phone is installed, short press the power button to use it normally.
The phone clip has been designed to prevent accidental clamping.

Buttons and Ports

Power Button
Long press for 3s: Power On/Off, long press the power button to turn on NANO SE. When the gimbal is turned on, long press the power button again to turn it off. Short press for 0.5s: Sleep Mode/Wake Up

Remote Control

M Button (Top Button)

Click: Switch between horizontal and vertical shooting modes
Double click: Switch between Follow and Lock mode Press and hold the M button (top button), then quickly triple-click the + button
Right button: Reset Bluetooth When the mobile phone cannot search NANO SE or Bluetooth connection is failed, NANO SE Bluetooth need to be reset. Button functions of the remote controller when connected with App or native camera

Note

When the native camera is in recording mode, the device will record movies. When the native camera is in photo mode, the device will take still photos.
Magic Video can only be used after NANO SE and Genie App are connected.
NANO SE only supports some mobile phones, please refer to the official website compatibility list or consult our after-sales service.

Remote Controller Indicator

The indicator will be illuminated when any button is pressed Flashing: Pairing

Bluetooth Light
Off: Bluetooth is disconnected
Solid: Bluetooth connection is success

Power Indicator

3 grids solid light: 50%-70% battery level
4 grids solid light:75%-100% battery level
2 grids solid light: 25%-50% battery level
1 grid solid light: 0%-25% battery level
Light flashes from bottom to top: charging, solid 4 grids light when fully charged

Upgrade Mode
Light flashes from top to bottom: NANO SE is in firmware upgrade mode

Note
If the upgrade fails, NANO SE will remain in the upgrade mode, and the power indicator will flash alternately from bottom to top. Please restart MOZA Genie App and NANO SE. NANO SE will automatically enter the upgrade mode after restarting. Please re-upgrade the firmware after MOZA Genie App and NANO SE Bluetooth are connected.

Charging Port
NANO SE uses a universal USB-type C charging port, the recommended charging specification is 5V/1A, you need to use your own charger. NANO SE can use mobile phone chargers or a power bank to charge. The battery will automatically stop charging when fully charged, disconnect the charger when fully charged.

Angle Adjustment
If the folding part is loose, please tighten the knob.

Horizontal / Vertical Mode

When the gimbal is powered on, click the M button (top button) to switch between horizontal and vertical shooting. Telescopic Rod
To extend the telescopic rod, pull upwards on the gray part as shown as below. Tripod
To open the tripod, push up on the telescopic rod, and place the tripod on a leveled surface.

Adjust the tilt axis angle manually according to the need, if the folding part is loose, please tighten the knob.

Sleeping Mode

When NANO SE is powered on, manually turn the roll axis counterclockwise toward the built-in motor lock, NANO SE will automatically enter to sleep mode. Manually rotate the roll axis clockwise to unlock, and then press the power button for 0.5s to wake up NANO SE.

The icon indicates that the roll axis is turned into the built-in motor lock.

Working Mode

Lock Mode
After NANO SE is powered on, it defaults to Lock Mode, and the phone will remain level within the range of the motor’s movement and will not follow the handle rotation.

Follow mode
To switch NANO SE from Lock Mode to Follow Mode, double-click the M button (Top button). In Follow Mode the phone will follow the handle rotations. Double-click the M button again to exit Follow Mode.

Bluetooth Connection

MOZA Genie App connection
Turn on Location and Bluetooth on your mobile phone, launch the MOZA Genie App, click the flashing Bluetooth icon on the App interface, after searching for the NANO SE signal, click the corresponding Bluetooth icon of Hi-Nano-SE- 12BB4004XXXX in the device list to connect to the device. After the connection is successful, the NANO SE Bluetooth light will remain on.
Connecting the phone for native camera control

Turn on Location and Bluetooth on your mobile phone, and select Bluetooth settings menu. Search for NANO SE Bluetooth signal, click Hi-Nano-SE- 12BB4004XXXX Bluetooth device and pair it (no password is required). After the connection is complete, the NANO SE Bluetooth light will remain on. Now you can control the native camera with the remote controller.

Bluetooth reset

When NANO SE cannot be found or if the connection fails, press and hold the mode button (top button), and quickly triple-click the + button (Right button) to reset NANO SE Bluetooth. After resetting, click the flashing Bluetooth icon on the MOZA Genie App interface to search for the device, then reconnect to NANO SE.

Introduction to MOZA Genie App

MOZA-Nano-SE-Selfie-Gimbal-Extendable-Smartphone-Gimbal-
fig-25

MOZA-Nano-SE-Selfie-Gimbal-Extendable-Smartphone-Gimbal-
fig-32

Firmware Upgrade

Turn on the MOZA NANO SE and connect it to the MOZA Genie App
A prompt will appear in the upper left corner of the App interface when new firmware is available, click the yellow button in the upper left corner to upgrade the firmware.
Also, you can click the NANO SE upgrade. setting and “Firmware Upgrade” in the menu to

Notes

Check the battery level of NANO SE and make sure that at least two of the battery indicator lights are on before upgrading. After NANO SE is connected to MOZA Genie App, follow the above operations if the App prompts to upgrade the firmware.
Do not exit the MOZA Genie App interface or transfer the App to the background operation or turn off the NANO SE when upgrading. Pay attention to the prompt information on the App interface. Restart the MOZA Genie App and NANO SE after the upgradation is successful.
If the upgrade fails, the NANO SE will remain in upgrade mode and the power light will flash from bottom to top. Restart MOZA Genie App and NANO SE, the NANO SE will automatically enter into upgrade mode. Reattempt to upgrade the firmware after connecting the Genie App and NANO SE.

Storage
Turn off the NANO SE and remove the smartphone, follow the instructions below to store the NANO SE. MOZA-Nano-SE-Selfie-Gimbal-Extendable-Smartphone-
Gimbal-fig-30

FAQs

The pairing of remote controller and NANO SE
NANO SE has been paired with the remote controller before leaving the factory, the following operations are not required unless there is an issue during use. Please contact MOZA after-sales service and complete the following steps to re-pair the remote controller and NANO SE, if none of the NANO SE buttons works after connecting with MOZA Genie

App
Press the menu button (top button) and record button (down button) at the same time until the remote controller indicator flashes, After the remote controller indicator flashes, all the battery indicator lights will flash. When the blinking stops, pairing is complete.

The battery indicator flashes

**If the first battery light indicator (the light closest to the power button) flashes after powering on and NANO SE motor is weak, attempt to upgrade the firmware. If the issue persists, contact MOZA after-sales service.
**

NANO SE Registration

In order to provide better service and experience, complete register your product the first time you connect the NANO SE to MOZA Genie App. Enter your email address in the dialog box and fill in the verification code in the email to complete the registration.

Attention
If you do not receive the verification code email from MOZA

Ensure the email address you filled in is correct
Ensure you are accessing to the email address provided in the registration interface 1.3 Check your spam to make sure our email is not filtered as spam
Add support@gudsen.com and gudsen-services@gudsen.com to your email contact or trusted sender list, and request a new verification code

How to receive a new verification code

The registration interface can re-send the verification code manually every 60 seconds
Ensure you’ve entered the latest verification code sent or generated, the old verification code cannot be verified
If you have other questions, please contact MOZA after-sales service

Product Specification

Payload	280g
Weight	250g

Size (LWH mm)

| Unfolded: without stick 60.748.6301

with stick 60.748.6690

Folded: 60.760.9171.4

Supported phone size

| Width: 60 ~ 88mm

Tripod length

| 94mm

Battery Life

| *7(h) (Eccentric installation)

*10(h) (Well balanced)

Charging interface

| USB Type-C

Charging specification

| 5V/1A DC

Bluetooth

| 5.0 BLE

Battery specification

| Standard voltage: 3.7V
Battery capacity: 950mAh
Fastest charging time| *140 (min)
Remote control distance| 10m(Max)

Mechanical Range

| Roll Axis: 270°
Tilt Axis: 180° (Manual adjustment)

Notice: Laboratory environment test may change according to different use conditions

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g. during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
IČO: 27082440

Subject of the declaration:
Title: Moza NANO-SE
Model / Type: NANO-SE

The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):
Directive No. (EU) 2014/53/EU
Directive No. (EU) 2011/65/EU as amended 2015/863/EU
Prague, 18.08.2021

WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.