ANDREA COMMUNICATIONS ANR-1000 Wireless Bluetooth Headset User Manual

ANDREA COMMUNICATIONS ANR-1000 Wireless Bluetooth Headset

Thank you for purchasing the Andrea
Communications ANR-1000 Wireless Bluetooth® Headset with Noise Cancelling Microphone and Active Noise Reduction (ANR) Earphones.

We hope you enjoy them!
This instruction manual will get you started and help you make the most of your new headset.
Andrea Communications ANR-1000 Stereo Headset offers clear, full-bodied sound with wireless Bluetooth® operation.

• Pair the headset with any Bluetooth® capable device to listen to music wirelessly.
• Use the 3.5mm auxiliary cable (included) to operate on any non-Bluetooth® enabled device.
• The adjustable boom microphone allows for hands-free phone calls with just the touch of a button.
• Soft padded ear cushions and an adjustable headband ensure a secure and comfortable fit.
• Headset folds for easy portability.
• Carry Case included.

What’s in the box

1. LED
   Green LED – lights when ANR is turned on
   Red LED – lights when headset is charging
   Blue/Red LED -flashes quickly when in pairing mode
   Blue LED flashing slowly indicates paired in Bluetooth® mode

2. ANR ON/OFF BUTTON
   Green LED lights when ANR is turned on

3. BUTTON
   Short press – next song track
   Long press -volume down

4. BUTTON
   Short press – previous song track Long press -volume up

5. USB CHARGING JACK
   Red LED – lights when headset is charging
   LED goes off when headset is charged

6. AUXILIARY 3.5mm JACK
   Plugging in the included 3.5mm Audio cable will automatically switch the headset into auxiliary mode turning off the Bluetooth® mode. The ANR function also operates when in auxiliary mode. Use this cable to connect to any non- Bluetooth® enabled devices such as computers, laptops, tablets and airline seats.

7. BUTTON
   Long press (3 seconds) – turns on headset and automatically enters it into pairing mode. Short press -allows you to pause and pressing button a second time will play your music. When calls come in Short press will answer the call. Short press again to end call. Double click quickly to redial last number. To place headset in gaming mode short press 3 times (See Gaming & Movies).

CHARGING YOUR HEADSET
Make sure that your headset is fully charged for two hours before you begin using it. Plug it into the USB port on your computer (with the included charging cable) or use an AC power supply (not included) to charge from an electrical outlet. When the battery indicator has a solid red light, your headset is charging. When the headset is fully charged, the battery indicator shuts off.

TURNING YOUR HEADSET ON AND OFF
Press the button for 3 seconds. The headset will turn on and automatically go into pairing mode. The LED will flash blue and red. When paired to your device the LED will slow flash blue. Pressing the button again for 3 seconds will turn the headset off.

PAIRING YOUR HEADSET
While in pairing mode (blue and red LED flashing) find “Andrea ANR-1000” on your device and select. When pairing is success­ful the LED will slowly flash blue. Some devices may require a password to connect to Bluetooth. Use passcode “0000” if prompted.

ACTIVE NOISE REDUCTION (ANR) MODE
Press the button to activate the ANR function. When ANR is activated the LED will light green. Pressing the button again will turn off ANR and the green LED will go off. The ANR function will work in both Bluetooth and Auxiliary modes.

PAUSE AND PLAY CONTROLS
Short pressing the button will pause song tracks. Pressing the button a second time will play the song track.

GAMING AND MOVIE MODE
The ANR-1000 Headset has a low latency mode for Gaming or watching Movies. When in this mode the ANR-1000 will use more power and have a reduced battery life. To activate the Gaming mode, press the button three times. You will hear a sound indicating that you are in gaming mode. Press the button again 3 times to exit gaming mode and return to normal Bluetooth® mode. Your ANR-1000 headset defaults to normal mode when turned on.

AUXILIARY MODE
The ANR-1000 can be used in Auxiliary Mode. Plug the 3.5mm audio cable into the 3.5mm jack on the headset. When the cable is plugged in Bluetooth mode turns off and blue LED will not be lit. When in auxiliary mode you can plug your ANR-1000 into any headphone jack on computers, laptops, tablets and other devices including airline seats. The ANR function can still be used when in auxiliary mode. Note that when in auxiliary mode you will not hear the ANR ON or ANR OFF voice prompts.

VOLUME & SONG TRACK CONTROL BUTTONS
The  and buttons operate both the volume and song track up and down functions. When pressing these buttons with a short press you can control the song tracks. Pressing will go to the next track and pressing will play the previous track.
When pressing these buttons for more than l second or a long press you can control the volume of the headset. Pressing will increase volume and pressing will decrease volume.

CALL ANSWER, END AND REDIAL FUNCTION
When paired to your mobile phone your ANR-1000 can receive and make return phone calls. When a call comes in pressing the button will answer the call. When your call is complete pressing the button again will end the call. After the call if you double click the button you can redial the last call that came in.

WARNING
For your comfort, health, and safety, do not use headset at high volumes for extended periods of time. Doing so can cause permanent hearing loss. Always listen at moderate levels. Do not use while driving, cycling, operating machinery, or during any activities that require you to hear the sounds around you. To prevent hearing damage, it is recommended that you turn the volume all the way down before turning off the headset. When you turn them back on, increase the volume until it reaches a comfortable and safe level.

CARE AND MAINTENANCE

Follow these recommendations to keep your ANR-1000 Wireless Bluetooth® Stereo Headset working for years to come.

• DO NOT modify or attempt to repair this headset. Doing so will void your warranty.
• DO NOT expose this headset to liquids (including rain), moisture, or humidity.
• DO NOT expose this headset to flammable materials or an open flame to avoid the risk of explosion.
• DO NOT use chemical cleaners on this headset; use only a soft, dry cloth.
• When not in use, turn the headset off and store in a cool, dry place. Extreme temperatures (below-10°C/14° F or above 45°C/113° F) can shorten battery life and may affect operation. High temperatures may also degrade performance.
• DO NOT place the headset in direct sunlight.

SPEAKER SPECIFICATIONS

• Size: 40mm Diameter
• Frequency range: 20-20000Hz
• Impedance: 240±15%
• Sensitivity: 96dB±3dB
• Rated power: 30mW
• Maximum input power: 150mW

POWER SPECIFICATIONS

• Battery type: Li-ion
• Battery Capacity: 400mAh
• Playing time: 10 hours
• Charging Time: 3.5 hours
• Standby time: 200 hours

BLUETOOTH® SPECIFICATIONS

• Bluetooth Version: V5.l+EDR
• Frequency: 2.402-2.480GHz
• Active cancellation: -23dB~-25dB
• Transmission power: +2dBm, Class2
• Transmission Distance: l0m/ 30feet
• Talking Time: About 10 hours
• Music playing time: About 10 Hours
  +SNR: 1!75dB
  +THD: :50.1

MICROPHONE SPECS

• Sensitivity: -36dB ± 3dB
• Directional Sensitivity: SdB (1KHZ@90degree)
• Microphone Impedance: 2.2kn
• S/N: G0dB
• Operating Voltage: 1-l0V
• Current Consumption: 500μA

TECHNICAL SERVICE

We hope that you enjoy your Andrea Communications ANR-1000 Wireless Bluetooth® Headset with Noise Cancelling Microphone & Active Noise Reduction (ANR) Earphones.
If you have any additional questions, please visit our website at www.andreacommunications.com/support or contact our Technical Service Team via email at support@andreacommunications.com or by phone at 1.800.442.7787 (USA & Canada) for assistance.

WARRANTY INFORMATION

To learn more about our Limited Warranty,
please visit our website at: Andreacommunications.com/warranty- information

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>