YAMDROK Y1 Wireless Earbuds User Guide
- June 10, 2024
- YAMDROK
Table of Contents
Y1 Wireless Earbuds
User Guide
Pairing
Please open the charging case, take out the two earbucts, and tear off the insulating film on the earbuds charging contacts, then put the earbuds back into the charging case.
- Open the charging case, take out the two earbuds, the earbuds will automatically power on and enter pairing mode. One earbud is blinking With white and red lights, another one’s white light stays on.
- Turn on the bluetooth of your device, and please choose-Yamdrok Y1 in the list to complete poking.
Reast
-
Please take the two eorphones out of the charging case and mdse sure the earphones are turned on.
-
Quickly top one earphone’s touch button 5 times until the Indicator light flashes white and red lights alternately twice, the reset is completed.
Wearing
- Identify the left and right earphones and wear.
- Rotate the earphones and find the most comfortable position.
Product Diagram
Control
Power on| Automatic: Take out the earbuds, the earbuds will automatically
power on
Manually: Long press the touch button for 1.5 seconds in shutdown status
---|---
Power Off| Automatic: Place the earbuds back into the charging case, the
earbuds will automatically shut down
Manually: Long press the touch button for 10 seconds in working status.
Play/Pause| Double tap the touch button
Volume-| Tap the left touch button once
Volume+| Tap the right touch button once
Play next| Long Press the right touch button for 1.5 seconds
Play previous| Long Press the left touch button for 1.5 seconds
Answer/Hang up| Double tap the touch button
Reject phone call| Long press the touch button for 1.5 seconds
Switch between two calls| Tap the touch button once
Activate voice assistant| Triple tap the right touch button
Enter/Exit game mode| Triple tap the left touch button
Q &A
Ql: What does the indicator light on the charging case mean?****
– 1. When the earbuds are put back into the charging case, the indicator
light of the charging case shows:
100%-11 % remaining power……………. white light stays on
10%-l% remaining power…………………… white light flashing
0% remaining power…………….. indicator light does not light up
– 2. When charging the charging case, the indicator light indicates:
0-99% remaining power…………………….. red light flashing
100% remaining power……………………. red light stays on
Q2: How to charge the charging case?****
– 1. Connect with a Type-C charging adapter to charge .(Charging current is not greater than 1A).
– 2. When not using for a long time, please charge it once every three months at least.
Q3: Why does the earphone still connect to the mobile phone after puffing it back into the charging case ?****
– 1. The charging case has no power. The earphone will not power off in
charging case when charging case has no power.
– 2. Make sure the earphone is properly placed in the charging case. Please
try to clean the contact area between the charging box and the earphones with
a soft cloth, keep the charging metal piece and pin clean.
Q4: How to disconnect the earphone from the phone?****
– Method 1: Put the earphone back into the charging case, the earphone
will automatically shut down and disconnect.
– Method 2: Turn off the Bluetooth of mobile phone, the earphone will
disconnect
– Method 3: When the earphone is not in the charging case, long press the
touch button of the earphone for 6 seconds, then the earphone will disconnect
from the current mobile phone and enter the pairing status.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference. (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
IC ID
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference thatmay cause undesired operation of the device?’
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
MANUFACTURER
shenzhenshiguozhenkejiyouxiangongsi
1309, B Zuo, Chuangye Road, Longhua
District Shenzhen Guangdong, China.
support@yamdrok.net
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>