oraimo OSW-31N Smart Watch User Guide

oraimo OSW-31N Smart Watch

WELCOME GUIDE

For safety issue, the product remains low capacity during shipping.
Please fully charge the product before initial use!
Please read this Guide carefully before using the product

Product Overview

Setting Up Your Smart Watch

For the best experience, we recommend using the updated oraimo Health App for iOS and Android.

Pair With Your Phone

1. Get ready with the oraimo Health App, scan the OR code on your watch or find the oraimo Health App in one of these locations, depending on your device:
2. When the App is installed, open it and follow the instructions that help you create your account, or login to your existing account.
3. Your account asks for information such as height, weight, and gender to make various calculations and tailor your experience using the app. You can modify your information in oraimo Health – Account – User
4. Long press the side button of the watch to turn it on, follow the onscreen instructions to setup the language, and get ready pairing with the phone.

Scan the QR code to pair:
Use oraimo Health APP to scan QR code
Turn on the Bluetooth in your phone, scan for your watch, and tap to pair:
After pairing with your phone, read through this guide to explore the various functions!

GPS Tracking in Sports Mode

oraimo Watch 2 has all four major satellite location services (GPS, GLONASS, Beidou, and Galileo) built into it. When you start a sports session, it automatically searches for satellite positioning services and tracks your location.
When you finish the session, the watch will sync the tracked position data to your phone. You can see the auto-generated workout map in the oraimo Health App through Preview -> Exercise -> All sports.

Getting To Know Your Smart Watch

Wrist Placement
For all-day wear, your watch should usually rest a finger’s width below your wrist bone and lay flat, as you would normally wear a watch.

Charge Your Watch
Connect the metal contacts on the charging dock to those on the back of the device, then put them on a flat surface.

Connect the charging cradle to a power supply, the device’s screen will light up and display the battery level

The charging dock is not water resistant. Wipe the port, metal contacts, and the device dry before charging.

Power On/Off

• When the watch is powered off, charge the watch or long press the home button for 3 seconds to power it on.
• When the watch is turned on, press and hold the side button for 3 seconds.
  Choose Power Off and tap again to confirm. The watch vibrates and turns off. You can also power off from the “Settings” menu. (Settings – System Settings – Power Off)

Wake Up the Watch
When you’re not using this product, the display is off. To wake it up:

• Press the side button.
• Turn your wrist towards you. This function, known as “Raise to Wake”, can be turned off in Settings – Raise to wake – Raise to wake. You can also schedule when it’s activated during the day.

Using The Clock And Menus

• To start, you can return to the home screen clock face. From here you can swipe to see data about your steps, activity time, calories, heart rate, and functions like training modes, weather, message, music, etc.

Troubleshooting

Can’t connect with BT.

1. Make sure your device supports BT 5.1. Make sure your device’s software is or above iOS 11.0 or Android 6.0.
2. Restart BT and reconnect after 20 seconds.
3. Restart your phone.
4. Make sure your phone is not connected with other devices.
5. Make sure oraimo Health App is running in your phone’s system.

Can’t find the watch in Bluetooth.
Make sure your phone’s location service is enabled.
Make sure the watch has enough power, it’s not connected with another
phone and is powered on. Also you need to keep it close to your phone.
if you still cannot find it, please turn off your phone’s BT function and reconnect after 20 seconds.

Can’t monitor heart rate.
Make sure you wear the watch tightly enough and it’s positioned properly to monitor heart rate.

Can’t receive notifications after enabling it.

Android: Make sure the watch is connected to your phone. Allow Doraemon Health App to access notifications. If you have any security Apps installed, add Oraimo Health to the trust list.
iPhone: Make sure the watch is connected to your phone. Reboot your phone and try to reconnect with the product.

Is the product waterproof?
This product supports 5ATM waterproofing. You can wear it while washing your hands, having a cold shower, or washing your car. Please do not wear it while diving or scuba diving.

Do I need to connect BT all the time? Will my health and sleep data stored if not connected to the phone?
Your data will be kept in the watch for seven days. When it is reconnected to the phone, your health and sleep data will be synced automatically. Please remember to synchronize data with the phone in time to get maximized utility.
Note: Call and message notifications only work when BT is connected.

Basic Product Specifications

Customer Service

365 DAYS WARRANTY
& Email
India: care.in@oraimo.com
Nigeria: care.ng@oraimo.com
Kenya: care.ke@oraimo.com
Ghana: care.gh@oraimo.com
Morocco: care.ma@oraimo.com
Egypt: care.eg@oraimo.com
South Africa: care.za@oraimo.com
Others: service@carlcare.com

Warranty Certificate

Warranty Terms & Conditions

• All quality-related defects on items sold directly by oraimo or oraimo’s authorized resellers are covered by an extensive warranty, starting from the date of purchase.
• oraimo’s limited warranty is restricted to the country of purchase. The limited warranty is void on items taken outside the country they were originally bought in or shipped to directly from an authorized online purchase.
• This warranty covers only original oraimo products. It is not applicable to normal wear and tear, or any defects arising from damage caused by misuse of this product.
• Warranty is for the primary product only nor transferable. Any free additional products) are not covered in this warranty.
• If the product fails regardless of usage in compliance with the instruction manual and other written precaution, replacement will be provided free of charge.
• To receive replacement, bring the warranty certificate and the product itself to the store from where you have purchased the product.

CAUTION:

1. Risk of explosion if battery is replaced by an incorrect type, dispose of used batteries according to the instructions.
   • disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
   • leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
   • a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
2. EUT Temperature: 0 C ~ +53 C (Standalone). 0 C~+40 C (with adapter).

FCC Caution:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Operating Frequency: BT: 2402-2480MHz (TX/RX);
Modulation mode: GFSK (BLE)

EU DECLARATION OF CONFORMITY in accordance with
Annex VI of Directive 2014/53/EU of the European Parliament and of the Council
For the following Radio equipment:
Model: OSW-31N
Product: Smart Watch
Trade name or Brand: oraimo
Software / Hardware number: 1.2.0/V1.3

1. Name and address of the manufacturer or his authorized representative:
   Manufacturer: ORAIMO TECHNOLOGY LIMITED
   Address: FLAT 39 8/F BLOCK D WAH LOK INDUSTRIAL CENTRE 31-35 SHAN MEI STREET FOTAN NT

2. This declaration of conformity is issued under the sole responsibility of the Manufacturer.

3. The object of the declaration (identification of the radio equipment allowing traceability; it may include a color image of sufficient clarity where necessary for the identification of the radio equipment):

4. The object of the declaration described above is in conformity with the relevant Union harmonization legislation: Directive 2014/53/EU (RED)

5. Notified Body Name: Eurofins Electrical and Electronic Testing NA, Inc.
   Notified Body Number: 0980
   Notified Body Assessment Performed: Module B/C on Article 3.1a, 3.1b, 3.2 and 3.3 Technical File Identification Number: N/A

6. Where applicable, a description of accessories and components, including software, which allow the radio equipment to operate as intended and covered by the EU declaration of conformity: User instructions are provided in the User Manual. The Software and Hardware versions are specified above.

7. Additional information:
   Referring to Article 10.2 of the Directive, this equipment is so constructed that it can be operated in all Member States, without infringing applicable requirements on the use of radio spectrum. Referring to Article 10.10 of the Directive, there are no restrictions on putting this equipment into service or of requirements for authorization of use. Please refer to the User Manual for details.

On behalf of:
Manufacturer: ORAIMO TECHNOLOGY LIMITED
Address: FLAT 39 8/F BLOCK D WAH LOK INDUSTRIAL CENTRE 31-35
SHAN MEI STREET FOTAN NT
(place and date of issue): Shenzhen, 2021-3-27 (name, function): Yiting, Luo/ Manager
(Name and signature of person responsible)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>