Westfalia 964758 Screwdriver Instruction Manual
- June 10, 2024
- Westfalia
Table of Contents
964758 Screwdriver
Product Information
The 3.6V Battery Powered Screwdriver Set is a compact and lightweight tool that comes with multiple attachments, including a tool holder, LED indicator, direction switch, magnetic bit holder, bits, USB-C port, cutting attachment, eccentric attachment, and angle attachment. The screwdriver set also features an LED work light and battery level indicator for added convenience. The lithium-ion battery has a capacity of 1500mAh and a charging time of approximately 200 minutes. The maximum torque of the screwdriver is 5Nm, and it has a chuck for holding bits.
Product Usage Instructions
- Unbox the device.
- Insert the battery into the screwdriver.
- Insert the desired bit into the magnetic bit holder.
- Set the direction of rotation using the direction switch.
- Press the trigger to use the screwdriver.
- For applications that require attachments, select the appropriate attachment and attach it to the screwdriver.
- Use the screwdriver with the attachment as needed.
- To charge the battery, insert the USB-A to USB-C cable into the USB-C port on the screwdriver and connect it to a suitable power source.
- The LED indicator will show the battery level during charging.
- Do not dispose of old batteries in household garbage. Check with your local council for proper battery disposal methods.
- Refer to the included safety instructions to avoid malfunctions, damage or physical injury.
Original Instructions – Screwdriver
- Tool holder
- LED indicator direction of rotation Battery level
- LED work light
- Roatation Direction switch
- Switch trigger
- Magnetic bit holder
- Bits
- USB-C-port
- USB-A to USB-C cable
- Cutting attachment
- Eccentric attachment
- Angle attachment
Dear Customers,
Instruction manuals provide valuable hints for using your new device. They
enable you to use all functions, and they help you avoid misunderstandings and
prevent damage. Please take the time to read this manual carefully and keep it
for future reference.
Suitable for carpets, PVC, cardboard, leather, fabrics and the like.
TECHNICAL DATA
-
Battery
4 V Li-Ionen
1500 mAh -
Weight (without battery)
443 g -
No-load speed
200min-1 -
Max. torque
Max. 5 nm -
Porte-embout
1/4” -
Charging time
1 Stunde -
Charger *1 input
110 – 240 V ~, 50/60 Hz, 0.4 A -
Charger *1 output
5 V , 1.7A -
USB charging cable
Typ A – Typ C -
Sound pressure level*²
LpA = 55,5 dB(A)
KpA = 3dB(A) -
Sound power level*²
LwA = 66,5 dB(A)
KwA = 3 dB(A) -
Hand-arm vibration*²
Ah = 0,912 m/s2
K = 1,5 m/s2
*1 not included in the delivery
The declared vibration total value and the declared noise emission values have been measured in accordance with a standard test method. The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning!
The vibration and noise emission during actual use of the power tool can
differ from the declared total value depending on the ways in which the tool
is used, in particular, what kind of work piece is machined. It is necessary
to identify safety measured to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking account of all
parts of the operating cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time). Try to minimize
the impact of vibration and noise. Exemplary measures to reduce vibration
exposure include wearing gloves while using the tool, limiting working time,
and using accessories in good condition.
SAFETY NOTES
Please note the included General Safety Notes and the following safety notes
to avoid malfunctions, damage or physical injury:
- Recharge the battery only with the provided charger cable.
- Before starting any work on walls, floors or similar, make sure that all power lines in the work area are switched off at the main switchboard. Inspect the proposed drill hole location for any utility lines (e. g. water, gas, power) before drilling. Use a suitable device such as a metal or electricity line detecting device.
- Do not charge the screwdriver outdoors.
- Take special care of the screwdriver. Avoid dropping it onto any hard surface and do not subject it to pressure or any other form of mechanical stress. Keep the screwdriver away from extreme heat and cold.
- Do not attempt to repair the screwdriver. If any parts are damage have them repaired by a qualified technician or contact your customer service.
- Only charge, operate and store the screwdriver at an ambient temperature between 10º C and 40º C.
Additional safety instructions for batteries and battery chargers
WARNING: Lithium-ion batteries pose a risk of fire, burns and explosion if improperly used, stored or charged.
Use charger properly.
- Before charging the battery, follow the instructions in the relevant section of this user manual for the correct use of the battery charger.
- Do not use the charger to charge batteries other than the ones supplied. Keep the battery charger clean; Foreign bodies and dirt can cause a short circuit and clog the ventilation holes. Failure to follow these instructions could result in overheating or fire.
- Allow batteries to cool for 15 minutes after charging or intensive use. Failure to follow these instructions could result in overheating or fire.
- Only charge the batteries in chargers recommended by the manufacturer. A charger designed for a particular type of battery may present a fire hazard if used with other batteries. Only charge the lithium-ion battery with the charger included in the scope of delivery or a charger specially designed for this item.
- Only use the rechargeable batteries provided for this purpose in the power tools. The use of other batteries can lead to injuries and the risk of fire.
- If the connection cable of the charger is damaged, it must be replaced by the manufacturer, an authorized service workshop or a specialist before use.
- The device is designed for use up to 2000 m above sea level.
- Keep the battery out of the reach of children.
- When not in use, store batteries in a dry place at room temperature (approx. 20˚ C).
- Do not open, disassemble, compress, heat above 60 ° C or burn batteries. Do not throw into fire or the like.
- When the battery is not in use, keep it away from paper clips, coins, keys, nails, screws, or other small metal objects that could cause the contacts to be bridged. A short circuit between the battery contacts can result in burns or fire.
| Batteries do not belong in the household garbage.
For battery disposal please check with your local council.|
---|---|---
EU DECLARATION OF CONFORMITY
We, the Westfalia Werkzeugcompany, Werkzeugstraße 1, D-58093 Hagen, declare by
our own responsibility that the product
3,6 V Battery-Powered Screw Driver Set
Article No. 96 47 58
is according to the basic requirements, which are defined in the European Directives and their amendments.
2011/65/EU
Restriction of the Use of certain hazardous Substances in electrical and
electronic Equipment (RoHS)
2014/30/EU
Electromagnetic Compatibility (EMC) EN 55015:2019+A11, EN 61547:2009
The technical documentations are on file at the QA department of the Westfalia Werkzeugcompany.
Hagen, 2nd of November, 2021
Thomas Klingbeil,
Qualitätsbeauftragter / QA Representative
DEUTSCHLAND
Westfalia
Werkzeugstraße 1
D-58093 Hagen
Telefon: (0180) 5 30 31 32
Telefax: (0180) 5 30 31 30
Internet: www.westfalia.de
ÖSTERREICH
Westfalia
Moosham 31
A-4943 Geinberg OÖ
Telefon: (07723) 4 27 59 54
Telefax: (07723) 4 27 59 23
Internet: www.westfalia-versand.at
SCHWEIZ
Westfalia
Wydenhof 3a
CH-3422 Kirchberg (BE)
Telefon: (034) 4 13 80 00
Telefax: (034) 4 13 80 01
Internet: www.westfalia-versand.ch
DISPOSAL
Dear Customer,
Please help avoid waste materials.
If you at some point intend to dispose of this article, then please keep in
mind that many of its components consist of valuable materials, which can be
recycled. Please do not discharge it in the rubbish bin, but check with your
local council for recycling facilities in your area.
Gestaltung urheberrechtlich geschützt
©Westfalia 11/21
References
- Westfalia Versand Österreich | Werkzeug ✓ Garten ✓ Technik ✓ & mehr
- Westfalia Versand Schweiz | Werkzeug ✓ Garten ✓ Technik ✓ & mehr
- Westfalia Versand Deutschland | Werkzeug ✓ Garten ✓ Technik ✓ & mehr