SONOFF L2 Smart LED light Strip User Manual

SONOFF L2 Smart LED light Strip

Product Information

Sonoff-L2/L2 Lite Smart LED Light Strip
The Sonoff-L2/L2 Lite is a Smart LED light strip that offers a range of features such as app control, voice control, single/countdown timing, share control, dimming, music reactive mode, 16M colors remote control, Bluetooth control, and scene mode. The light strip can be cut every 100mm and is available in different models such as L1-2M, L1-5M, L1 Lite-5M -EU, and L1 Lite-5M -US. It comes with a Wi-Fi controller and a power adapter that has an input voltage of DC 12V and luminous flux of 300lumens/m.

Specifications

• Input Voltage: DC 12V
• Luminous Flux: 300lumens/m
• Beam Angle: N/A
• Work Humidity: N/A
• Material: N/A
• Light Decay: N/A
• LED QTY: N/A
• Life Expectancy: N/A
• Operating Temperature: N/A
• Protect Range: N/A
• Power Adapter Input: 100-240V AC 50/60HZ 0.6A Max
• Output: DC 12V 2000mA
• Wi-Fi Controller Input: DC 5-12V
• Remote Control: 24 Keys IR Remote Controller
• Remote Controller Battery: 3V(CR2025)
• App Operating Systems: Android & iOS
• Power Max: 36W
• Wi-Fi: IEEE 802.11 b 2.4GHz
• Bluetooth: 5.0 BLE

Product Usage Instructions

1. Clean the surface where you want to install the LED light strip.
2. Tear the backing tape of the light strip.
3. Adhere the light strip to the surface.
4. Download the eWeLink App.
5. Power on the LED light strip.
6. Pull out the insulation sheet and long-press the button on the LED light strip for 5 seconds until it flashes, indicating that it has entered Bluetooth Pairing mode. If not paired within 1 minute, the device will exit the Bluetooth Pairing mode. To enter this mode again, long-press the on button on the remote controller for 5 seconds until the light strip flashes and release.
7. Add the device by tapping + and selecting Bluetooth Pairing, then following the prompt on the App.

Note that when Wi-Fi is not available, the device will automatically switch to Bluetooth control. To re-establish a connection, long-press the button on the LED light strip for 5 seconds until it flashes, indicating that it has entered Bluetooth Pairing mode, and you can pair again. To delete the device and restore it to factory settings, simply delete the device on the eWeLink app.

Safety Warning
Ensure that you install the LED light strip in a well-ventilated environment for heat dissipation.

• Before using this product, please make sure that your voltage is appropriate for this product’s working voltage. Using this product with a voltage other than the one specified may damage the product and cause safety hazards.
• LED Light Sources are unchangeable, please don’t dismantle them.
• While the Light Strip is working, it will generate heat so please keep it in a crossventilation environment for heat dissipation.

Warranty Conditions

For warranty conditions, please contact the customer line.

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g. during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

The product user guide contains product features, how to use, and the operating procedure. Read the user manual carefully to get the best experience and avoid unnecessary damage. Keep this manual for future reference. If you have any questions or comments about the device, please contact the customer line.

Features of the Smart LED light strip

Operating instruction

1. Clean the surface
2. Tear the backing tape
3. Adhere it to the surface
4. Download the eWeLink App
5. Power on
6. Pull out the insulation sheet, then long press “on” button for 5s until the light strip “flashes”, which means it enters the Bluetooth Pairing mode.

The device will exit the Bluetooth Pairing mode if not paired within 1 min. If you want to enter this mode again, long press the “on” button on the remote controller for 5s until the light strip “flashes” and release.

7. Add the device Tap “+“ and select “Bluetooth Pairing“, then operate following the prompt on the App.

Wi-Fi control setting

Select the “Wi-Fi Settings” on the “Device Settings” interface in the eWeLin k App to add or change the network. When Wi-Fi is not available, the device will automatically switch into BIuetooth control (Ensure Bluetooth is enable on your mobile phone).

Re-establish

Long press “on” button for 5s until the light strip “flashes”, which means it enters the Bluetooth Pairing mode and you can pair again.

Factory Reset

Deleting the device on the eWeLink app indicates you restore it to factory setting

EU Declaration of Conformity

This product complies with the following directives: Directive no. 2014/53/EU and Directive no. 2011/65/EU as amended by 2015/863/EU.

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

Please dispose of this product according to your local WEEE regulations.
For any questions or comments about the device, please contact the customer line or visit www.alza.cz/kontakt or www.alza.co.uk/kontakt.

Importer: Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.hu – Kényelmes és biztonságos vásárlás | alza.hu
• Alza | Alza.co.uk
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz
• alza.de
• alza.hu
• alza.sk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>