Schneider Electric GV2L22 Circuit Breaker Magnetic Installation Guide
- June 10, 2024
- Schneider Electric
Table of Contents
Schneider Electric GV2L22 Circuit Breaker Magnetic
Product Information
GV2-APpp (GV2-P/L)
The GV2-APpp (GV2-P/L) is a product manufactured by Schneider Electric Industries SAS. It is a motor circuit breaker that provides protection against short circuits, overload currents, and phase failures. The product comes with two models – GV2-P and GV2-L. It is designed to be used in conjunction with contactors for starting, stopping, and controlling three-phase asynchronous motors.
The product has the following specifications:
- Rated operational voltage: 690 V AC
- Rated current: 0.1 A to 80 A
- Breaking capacity: 50 kA at 400 V AC
- Number of poles: 3P
- Mounting type: DIN rail
Product Usage Instructions
Before installing and using the GV2-APpp (GV2-P/L), please read the user manual carefully and follow the instructions provided.
- Mount the product on a DIN rail according to the instructions provided in the user manual.
- Connect the motor circuit breaker to the power supply and the motor according to the wiring diagram provided in the user manual.
- Adjust the thermal and magnetic settings of the product based on the rated current of the motor. The settings can be adjusted using the dials provided on the product.
- Turn on the product by moving the switch to the “ON” position.
- If the motor draws excessive current or there is a phase failure, the product will trip and move to the “OFF” position. In this case, check the motor and the wiring for any faults and correct them before turning on the product again.
- If the product needs to be reset after a trip, move the switch to the “OFF” position and then back to the “ON” position.
For further information on the installation, usage, and maintenance of the GV2-APpp (GV2-P/L), please refer to the user manual provided by Schneider Electric Industries SAS.
DIMENSION
INSTALLATION
