NAUTICA P100 10000 mAh Portable Fast Charger Instruction Manual
- June 10, 2024
- NAUTICA
Table of Contents
NAUTICA P100 10000 mAh Portable Fast Charger
Product Information
The Nautica 10000 mAh Portable Fast Charger – P100 is a high-quality product that combines technology and design for everyday use. It comes with a 3.3 ft / 1 m Type-C to USB-A charging cable and a user’s manual. The charger has two QC 3.0 outputs and one PD output, allowing you to charge up to three devices at the same time. The LED indicators show the battery capacity left and there is an ON/OFF switch to conserve power when not in use. The portable charger can be charged using the included Type-C cable or a Micro-USB cable (not supplied).
Technical Specifications
- Input (MicroUSB / PD): DC 5V / 3A, 9V / 2A, 12V / 1.5A
- Type-C Output: DC 5V / 3A, 9V / 2.22A, 12V / 1.66A
- USB-A Output 1/2: DC 5V / 3A, 9V / 2A, 12V / 1.5A
- PD Output: 20W
- QC Output: 18W
- Battery Capacity: 10000 mAh Li-polymer
- Product Dimensions: 2.71 x 0.65 x 5.33 in / 69 x 16.5 x 135.5 mm
- Product Weight: 7.77 oz / 220.5 g
Product Usage
- Charge the Portable Charger:
- Use the included Type-C cable to charge the portable charger
- Connect the cable to the PD input port on the Portable Charger
- Connect the other end to your computer USB port or any other USB power source
- The LED screens will indicate the power level remaining on the charger
- Note: You can also use a Micro-USB cable (not supplied) to charge the portable charger
- Charge Your Devices:
- Ensure that your Portable Charger is fully charged
- Use a charging cable (included Type-C cable or any applicable charging cable) to charge your device
- The LED screens will indicate the power level remaining on the charger
- You can charge 3 devices at the same time through three output ports (2 x QC 3.0, 1 x PD ports)
- LED Behaviours:
- Press the ON/OFF switch once to see how much battery capacity is left
- The LED indicators will illuminate in four different combinations to indicate the following battery capacity levels:
- 75-100% Capacity: 4 LEDs
- 50-75% Capacity: 3 LEDs
- 25-50% Capacity: 2 LEDs
- 1-25% Capacity: 1 LED
Safety and Maintenance
The warranty covers defects caused by improper materials or workmanship for a period of 1 year. The warranty does not cover defects caused by third-party modifications, repairs or replacement parts. Normal wear and tear and the natural breakdown of colors and materials over extended time and use are not warranted. Warranty applies to the USA only.
Thank you for purchasing an original
Nautica 10000 mAh
Portable Fast Charger – P100
You are getting a high-quality product that’s built to combine technology and
design for your everyday use.
Please read the below info carefully to get the most out of your new product.
This guide is ENGLISH only. For other languages and more detailed info on
care, use and warranty, please visit
technofashion.com
WHAT’S IN THE BOX
HOW TO USE
CHARGING YOUR PORTABLE CHARGER
- Please use included Type-C cable to charge the portable charger. Connect the cable to PD input port on the Portable Charger.
- Please connect the other end to your computer USB port or any other USB power source.
- You can also use a Micro-USB cable (not supplied) to charge the portable charger.
CHARGING YOUR DEVICES
- Ensure that your Portable Charger is fully charged.
- Use a charging cable (included Type-C cable or any applicable charging cable to charge your device). The LED screens will indicate the power level remaining on the charger.
- You can charge 3 devices at the same time through three output ports (2 x QC 3.0, 1 x PD ports).
LED BEHAVIOURS
When ON/OFF switch is presed once, the LED indicators will illuminate to
show how much battery capacity is left.
The LED indicators will illuminate in four different combinations to indicate
the following battery capacity levels:
75-100% Capacity | 4 LEDs |
---|---|
50-75% Capacity | 3 LEDs |
25-50% Capacity | 2 LED |
1-25% Capacity | 1 LED |
TECHNICAL SPECIFICATIONS
Input (MicroUSB / PD) | DC 5V / 3A, 9V / 2A, 12V / 1.5A |
---|---|
Type-C Output | DC 5V / 3A, 9V / 2.22A, 12V / 1.66A |
USB-A Output 1/2 | DC 5V / 3A, 9V / 2A, 12V / 1.5A |
Total Output | PD 20W + QC 18W |
Battery Capacity | 10000 mAh |
Battery Type | Li-polymer |
Product Dimensions | 2.710.655.33 in / 6916.5135.5 mm |
Product Weight | 7.77 oz / 220.5 g |
SAFETY AND MAINTENANCE
- Do not expose the Portable Charger to liquid, moisture or humidity.
- Do not use any abrasive cleaning solvents to clean the Portable Charger, as this can cause damage.
- Operating temperature should be between 32°F to 104°F / 0°C to 40°C.
- Do not expose the Portable Charger to sharp objects, which may cause damage.
- Do not expose the Portable Charger to extremely high or low temperatures. Do not drop the Portable Charger.
- Do not attempt to disassemble the Portable Charger, as this may cause damage to the unit.
- Do not dispose of the Portable Charger in the fire
- To preserve battery lifespan , use and recharge at least once every 4 months. Battery performance will decline over several years in normal conditions.
WARRANTY INFORMATION
We do our best to make sure that this product is free from defects in
materials and workmanship for a period of 1 year.
The following conditions must be met for your warranty claim to be approved:
You must have purchased the product from a Nautica or Techno fashion
authorized dealer.
You must provide proof as to the date of purchase from the Nautica or Techno
fashion authorized dealer.
You must have used the product only as intended and in accordance with the
product’s care instructions.
Within 12 months after the purchase, in case the product is determined to be
defective (at the date of original purchase) due to improper materials or
workmanship, you are entitled to free repair or exchange of goods. The product
should be returned to Techno fashion.
The warranty does not cover defects caused by third-party modifications,
repairs or replacement parts.
Punctures, scratches, normal wear and tear and the natural breakdown of colors
and materials over extended time and use are not warranted. Warranty applies
to the USA only.
We will make every effort to replace limited edition or discontinued products
but cannot guarantee availability for replacement.
Any limited edition or discontinued product still under its applicable
warranty that cannot be replaced with an identical product will be replaced
with the equivalent model based on availability.
We may make changes to products and designs in the time you purchased your
product and submitted a warranty claim.
Products repaired or replaced under this warranty may or may not incorporate
these changes.
SUPPORT
For any questions, email us at support@technofashion.com
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interfernce, and
- This device must accept any interference received, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This device generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this device does
cause harmful interference to radio or television reception, which can be
deter-mined by turning the device off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The distance between user and products should be no less than 7.87 in / 20 cm
designed, manufactured, distributed by
© 2021 Technofashion, Inc. All Rights Reserved. Designed in USA. Made in
China.
May be patented. See
technofashion.com/patents
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>