NAUTICA NTWS05 True Wireless Stereo Earbuds with Charging Case User Guide
- June 6, 2024
- NAUTICA
Table of Contents
NAUTICA NTWS05 True Wireless Stereo Earbuds with Charging Case
WHAT’S IN THE BOX
Your product comes with
four pairs of eartips ( S, 2*M and L ). Try all sizes to find the size that
fits best. Your device comes with size M eartips on
HOW TO USE ?
BLUETOOTH PAIRING
- Press each MFB button for 5 seconds, to turn on both earbuds.
- No need to hold MFB button after power is on.
- The Left & Right will automatically connect, one of the two earbud LEDs flashes white and green alternately.
- Find “Nautica T200” to connect with your phone.
CHARGING EARBUDS
For the best experience, it is recommended to charge the unit before first use.
- Charging: White LED light turns on.
- Fully charged: White LED light turns green and then Green LED light turns off.
CHARGING CASE
- Plug the small end of the USB cable into the Type-C USB port of the charging case.
- Plug the other end into a USB wall charger or computer (DC 5V) that is powered on.
TECHNICAL SPECIFICATIONS
| Bluetooth Version | v5.1 |
|---|---|
| Play Time | 4 hours |
| Talking Time | 3 hours |
| Earbuds Charging Time | 1.5 hours |
| Charging Case Charging Time | 1.5 hours |
| Standby Time | 10 hours |
| Battery Capacity (each earbud) | 35 mAh * 2 |
| Battery Capacity (charging case) | 300 mAh |
| Speaker Drivers | 0.51 in / 13 mm |
| Wireless Range | 33 ft / 10 m |
| Rated Input Voltage | 3.7 V |
| --- | --- |
| Input | 5V / 0.3A |
| Impedance | 32 Ω |
| Frequency Response | 20 Hz – 20 kHz |
| Mic. Sensitivity | -90 dBm |
| Earbuds Dimensions | 1.280.710.75 in / 32.61819.1 mm |
| Charging Case Dimensions | 2.40.831.73 in / 612144 mm |
| Weight (Each Earbud) | 0.25 oz / 7.2 g |
| Weight (Charging case) | 1.55 oz / 43.8 g |
| Charging Port | Type-C |
SAFETY AND MAINTENANCE
Before you use the device, read the following precautions carefully to ensure
optimal product performance. The use of earbuds will impair your ability to
hear other sounds. Use caution while using your earbuds during any activity
that requires your full attention. This package contains small parts that may
be hazardous to children and should be kept out of reach of children. This
product is not a
toy – never allow children to play with this product.
Please do not overuse the earbuds or put them under heavy pressure. Keep away
from wet and heat. Exposing the product to extreme hot or cold, such as in a
closed car in the summer and winter conditions, will reduce the capacity and
lifetime of the product. Earbuds listening at high volume levels – especially
over extended periods of time – may damage your hearing.Keep away from router
or other high-frequency transmitting equipment to prevent interruption of
signal receiving. Please use the earbuds under working range (up to 33 ft / 10
m). The effective range may vary depending on multiple conditions.
Power time may differ depending on personal use habits.
Do not dismantle the product. If any parts of your product require replacement
for any reason, including normal wear and tear or breakage, please contact us.
Unauthorized parties may damage the product. Do not drop, strongly vibrate, or
strike the product with hard objects to avoid damaging the internal circuit.
Do not use drastic chemicals or cleaner to clean the product. Do not use sharp
objects to scratch the product surface.
WARRANTY INFORMATION
We do our best to make sure that this product is free from defects in
materials and workmanship for a period of 1 year. The following conditions
must be met for your warranty claim to be approved: You must have purchased
the product from a Nautica or Technofashion authorized dealer. You must
provide proof as to the date of purchase from the Nautica or Technofashion
authorized dealer. You must have used the product only as intended and in
accordance with the product’s care instructions. Within 12 months after the
purchase, in case the product is determined to be defective (at the date of
original purchase) due to improper materials or workmanship, you are entitled
to free repair or exchange of goods.
The product should be returned to Technofashion. The warranty does not cover
defects caused by third-party modifications, repairs or replacement parts.
Punctures, scratches, normal wear and tear and the natural breakdown of colors
and materials over extended time and use are not warranted. Warranty applies
to the USA only. We will make every effort to replace limited edition or
discontinued products but cannot guarantee availability for replacement.
Any limited edition or discontinued product still under its applicable
warranty that cannot be replaced with an identical product will be replaced
with the equivalent model based on availability. We may make changes to
products and designs in the time you purchased your product and submitted a
warranty claim. Products repaired or replaced under this warranty may or may
not incorporate these changes.
SUPPORT
For any questions, email us at
[email protected]
FCC ID: 2AZBO-N00005
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. This device has
been tested and found complying with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this device does cause harmful interference to radio or television reception,
which can be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment.