SIGNATURE HARDWARE 434134 Ambler 1 Light Outdoor Post Lantern Instruction Manual
- June 10, 2024
- Signature Hardware
Table of Contents
SIGNATURE HARDWARE 434134 Ambler 1 Light Outdoor Post Lantern
Product Information: AMBLER (SKU: 434134)
The AMBLER is an electric fixture with a top cover and cage that can be assembled onto a tube. It requires installation by a professional if the user is unfamiliar with installing electric fixtures. Signature Hardware is not liable for any damage to the faucet, plumbing, sink, countertop, or personal injury during installation. All local plumbing and building codes must be observed. The product must be inspected for shipping damage upon unpacking.
Recommended Tools
- Wire Connectors (3 pcs)
- Screwdriver
- Pliers
- Electrical Tape
Care and Maintenance
Turn off the main power supply before cleaning the product or changing light bulbs. Handle glass shades and bulbs carefully as they are fragile.
Product Usage Instructions
-
Shut off the power at the circuit breaker and remove the old fixture.
-
Unpack the new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.
-
Assemble the Top Cover (A) to the Cage (F) using Screws (B).
-
Connect the black wire from the fixture to the supplied wire.
Connect the white wire from the fixture to the white (neutral) house wire. Secure all wire nuts and wrap the connections with electrical tape if necessary. If your outlet has a ground wire (green or bare copper), connect the fixture’s ground wire to it.
Tuck the wire connections neatly into the junction box. -
Attach the Cage (F) to the Tube (E) using Screws (D).
-
Turn on the power and test the fixture by switching it on.
If you have additional questions, check out Signature Hardware’s Help Center at www.signaturehardware.com for product and warranty information or contact customer support through live chat or email (support@signaturehardware.com).
BEFORE YOU BEGIN
We recommend consulting a professional if you are unfamiliar with installing
electric fixtures. Signature Hardware accepts no liability for any damage to
the faucet, plumbing, sink, counter top, or for personal injury during
installation.
Observe all local plumbing and building codes.
Unpack and inspect the product for shipping damage. If any damage is found,
contact our Customer
__Relations team via live chat at
www.signaturehardware. com or by emailing
support@siganturehardware.com.
GETTING STARTED
Ensure that you have gathered all the required materials that are needed for
the installation.
CARE AND MAINTENANCE
To clean, wipe with damp cloth. Do not use abrasive cleaners or cleaners that
contain alcohol.
CAUTION
Shut off main power supply before cleaning product or changing light bulbs.All
glass is fragile. Use care when handling glass shades and bulbs.
RECOMMENDED TOOLS AND ACCESSORIES
SAVE THIS MANUAL: RETAIN FOR CONSUMER’S USE. READ THESE INSTRUCTIONS COMPLETELY BEFORE
COMPLETO ANTES DE INSTALAR EL PRODUCTO: SI TIENE PREGUNTAS SOBRE EL PRODUCTO O LA INSTALACIÓN LLAME AL SERVICIO A A CLIENTES AL 1‐800‐221‐3379.
INSTALLATION
(FIG 1)
- Shut off the power at the circuit breaker and remove old fixture,
- Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.
- Assemble the Top Cover (A) to the Cage (F) with screws (B).
- CONNECTING THE WIRES Connect the black wire from the fixture to the supplied wire. Connect the white wire from the fixture to the white (neutral) house wire. Make sure all wire nuts are secured. You may wrap the connections with electrical tape. If your outlet has a ground wire (green or bare copper), connect fixture’s ground wire to it. Tuck the wire connections neatly into the junction box.
- Attach the Cage (F) to the Tube (E), and secure with Screws (D).
1.855.715.1800
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>