Joyoung L12-Y521-US01 Hands-Free Washing Blender Mixeur Automatique Instruction Manual

L12-Y521-US01 Hands-Free Washing Blender Mixeur Automatique
Instruction Manual

PREFACE
Thank you for choosing our Hands-free Washing Blender. We have written this manual to aid you in using and maintaining this product safely and properly. Please read this manual carefully before using, and keep it for your reference.

IMPORTANT SAFEGUARDS

Safety use
Prohibition

1. The product is designed for domestic used only.
2. Do not put the appliance base and cable into dishwasher machine.
3. Never immerse or swash the base into water or other liquid to prevent any damages to the product.
4. Do not place this product near high temperature, strong magnetic material, or in flammable or explosive gas such as natural gas, methane, etc.

Warning

1. Read all instructions.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electrical shock do not immerse cord, plugs, or appliance in water or other liquid.
4. Close supervision is necessary when any appliance is used by or near children.
5. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.
7. The use of attachments, including canning jars, not recommended by the manufacturer may cause a risk of injury to persons.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter, or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
12. Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to “off”, then remove plug from wall outlet.
13. Do not use appliance for other than intended use.
14. Do not attempt to defeat any safety interlock mechanisms.
15. This product is not intended to be used by persons (including children) with physical, sensory, mental disability, or lack of experience and knowledge of use, unless they are supervised or directed by a person responsible for their safety about the use of the appliance. Take care that children are prevented from playing with this product.
16. Please use a three-plug socket and ensure reliable grounding. Be sure to choose the power socket with the rated current not less than 10A and AC voltage of 120V.
17. Be sure to plug the power into the socket. If not fully inserted, it may cause a fire accident due to electric shock or overheating.
18. Do not use for purposes other than those specified in the manual.
19. Never try to automatically modify, disassemble or repair the product.
20. Do not flood the product in water or spray with water.
21. Do not apply external force on the pulp spout to avoid damage to the machine.
22. It is prohibited to process mango, licorices or other ingredients with too much fiber, so as not to block the pulp spout and damage the machine.
23. It is forbidden to use the pulp cup that does not come with the machine.

Notes

1. Do not open the mixing cup assembly during working or when the pulp is not completely discharged, so as to avoid burns due to overflow!
2. When the room temperature is higher than 30°C, the preset time should not exceed 12 hours.
3. Do not put the pulp cup on an open flame or heat on the induction cooker.
4. When the making is finished, the temperature of pulp cup, pulp outlet, stirring cavity and mixing cup assembly is high. Do not touch them directly with your hands.
5. If there are un-crushed ingredients in the stirring cavity that need to be discharged, please select the “Speed” function on the main interface to directly discharge the crushed ingredients.
6. Please add materials strictly according to the recipe when making drinks.
7. Do not power off when cleaning automatically.
8. For preset, there’s a slight error for the alarm time after pulping as compared with the standard preset time, which is normal and does not affect the quality of the drinks.
9. There may be a deviation between the actual making time and the on-screen making time, which is normal.
10. During make, do not remove the pulp cup by force.
11. Do not have the drink in case of abnormal power failure.
12. Before automatic cleaning, please ensure that the residue water box is in place.
13. After adding ingredients to the stirring cavity, please clean the ingredients around the cavity to avoid failure to seal the lid.
14. Making with colored ingredients might cause a stain.
15. This product is only used in the environment with the temperature of 4°C-40°C.
16. For food ingredients with the core, please remove the core before making.
17. Working time will be automatically adjusted according to altitude and voltage.
18. When the cleaning is done, open the mixing cup assembly to dry up.
19. When making rice drinks, rice will slightly stick to the stirring cavity, which is normal.
20. When the machine is powered on and working, it is strictly prohibited to contact the blade, motor and other movable parts to avoid injury or damage to the machine. It is prohibited to use this product empty (no food in the cup) or overloaded (the amount of food exceeds the rated value).
21. This product is for home use only. Do not use it for other purposes.
22. Please don’t plug or unplug the power plug with wet hands to avoid electric shock. Please hold the plug with your hand and pull it out when disconnecting the power supply. Do not pull the power cord. Do not touch the power cord with sharp edges, sharp corners, etc. to avoid damage and leakage.
23. Please place it on a stable table when using this product. Please do not operate the product on an inclined and unstable table or near flammable items such as carpets, towels, plastics, paper, etc. and keep away from the edge of tables to avoid product from falling or accidents.
24. It is strictly prohibited to move the machine in the process of working, to avoid the overflow of ingredients, causing burns and electric shock.
25. If the power of the machine is interrupted during the working process, please select the “Speed” function to crush and discharge the ingredients after the power is resumed again. After cleaning, replace the ingredients, do not re-select the function to continue working, otherwise it will cause over flow.
26. If the power cord is damaged, it must be replaced by a professional from the manufacturer, its maintenance department or similar department to avoid danger.
27. Please turn off the switch and disconnect the power supply when no one is using to avoid short circuit of the product.
28. The part materials in contact with food of the machine have passed the food grade certification, and are clean, sanitary and reliable.
29. Please refer it to a qualified department for recycling when discarding this product and its packaging. Please cut off the power cord when discarding.
30. The running speed of the product has been set to the ideal state, which does not need to be adjusted.
31. Please turn off the switch and disconnect the power supply to avoid leakage or accidental starting of the product before disassembling, installing, adjusting or cleaning any parts of this product.
32. Turn off the power switch and disconnect the power before replacing parts or touching moving parts.
33. The continuous stirring time of the product shall not exceed 6 minutes (refer to the recipe instructions and display instructions for the running time of each program) and it is necessary to stop the machine for 1 minute after each stirring; The above is a cycle. The power supply must be cut off, and the operation must be carried out after cooling for 15 minutes to ensure the product life after continuous operations for 3 cycles.
34. The machine must be kept more than 30cm away from the fire source to avoid damage to the machine or fire hazard.
35. Because the glass stirring cup is easy to break, please use and handle it with care. If any damage is found, please stop using immediately to avoid danger.
36. The air hole on the cup lid or feeding cover must be cleaned, and it is strictly forbidden to block it, so as to avoid splashing and other accidents.
37. Large or long strips of ingredients should be divided into small pieces with one side no more than 3cm or small pieces with length no more than 4cm, or as required in the recipe.
38. Do not place the machine against the wall while pulping.
39. Unplug from outlet when not in use, before putting on or taking off parts and before cleaning. Flashing light indicates ready to operate. Avoid inadvertent contact with the touch screen.
40. Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used but must be used only when the blender is not running.
41. Blade assembly is sharp, not locked in place and removable. Handle with care. When handling blade assembly, always hold by the shaft. To avoid a risk of injury, before pouring with the cover removed, carefully remove the blade assembly.
42. Always operate blender with cover in place.
43. Allow to cool before assembling or disassembling parts and before cleaning the appliance.
44. Keep hands and utensils out of container to reduce the risk of injury to persons or damage to the mixer.
45. Never add to container while appliance is operating.
46. Container must be properly in place before operating appliance.

SAVE THESE INSTRUCTIONS.

COMPONENTS AND FUNCTIONS

QUICK PRODUCTION GUIDE

Installation instructions

1. Add water in the water tank to the water mark of the required pulping amount, put on the water tank cover, and install in place as instructed;
2. Install the residual water box to the appropriate position;
3. After that, install the pulp cup and cup lid in place;
4. After the ingredients are put, place the mixing cup assembly in the corresponding position (turn clockwise until the position mark is aligned);
5. After pulping is completed, the machine enters the self-cleaning process. Please remove the pulp cup.

PRODUCT SAFETY INDICATORS

HOW TO USE

1. LED time/capacity display
2. Status display (oz. Time. Clean)
3. Prompt of abnormalities
4. Function selection button
5. Capacity selection button
6. Start/cancel button
7. Preset button
8. Speed button

Note:
The machine displays –:– in the standby state, and the time is displayed as working time after the functions are started.

INSTRUCTION OF USE

1. Install the whole machine
   Assemble the whole machine as stated in the installation instructions;

2. Add ingredients and water
   Open the mixing cup assembly, add ingredients, close the mixing cup assembly and turn clockwise until the position mark is aligned.

3. Select function
   Press the “Menu” button to select the required function.

4. Capacity selection
   Press the “Capacity” button to select the required capacity.

5. Start function
   After pressing the “Start/Cancel” button, the machine will start working;
   To cancel the making, press the “Start/Cancel” button within 15 seconds after the function started. The function can be re-selected for making;
   If it is necessary to cancel after water is added, please press the “Start/Cancel” button for more than 2 seconds. Then, the machine will automatically enter the cleaning mode.

Notes:

1. Please add ingredients according to the amount specified in the manual to avoid pulp overflow, blockage of spout and poor crushing;
2. Do not put mango and other ingredients with too much fiber, so as not to block the pulp spout;
3. When making fruit juice, please do not add hard ingredients (such as rock sugar, ice, etc.) to prevent damage to the machine;
4. When using the machine for the first time, it is recommended to press the “clean” button for deep cleaning;
5. The auto clean process cannot be canceled. If cancellation is desired, the machine power must be cut for more than 5 minutes;
6. In case of incomplete discharge of pulp, please ensure that the machine is cooled before cleaning, so as to avoid burns!

Use tips of product functions:

1. For the “Soy Milk”, “Almond Milk”, “Oat Milk”, “Sterilike” functions, the machine automatically adds water. Do not add water to the stirring cavity by hand, otherwise it will easily lead to overflow;
2. For the “Juice/Smoothie”, “Soup” function, the machine will not automatically add water. Be sure to add the ingredients as instructed in the recipe;
3. For the “Speed” function, the machine will not automatically add water;
4. Long press the “Start/Cancel” button for 2 seconds while the machine is working to cancel the making.

Juice/Smoothie function

1. Add ingredients and purified water
   For the “Juice/Smoothie” function, add ingredients and purified water or milk to the stirring cavity as needed.

2. Select function
   Press the “Menu” button to select the “Juice/Smoothie” function.

3. Start function
   After pressing the “Start/Cancel” button, the machine will start working. Long press the “Start/Cancel” button for 2 seconds to cancel the making.

Sterilize

1. After cleaning the stirring cavity, remove the vent valve on the mixing cup assembly: press the “Menu” button to select the “Sterilize” function;
2. Press the “Start/Cancel” button to start the function for quick drying and sterilization.

Speed function

1. Add ingredients and water or milk to the stirring cavity as needed;
2. Press “Speed” to select gear, and press “Start/Cancel” to start working;
3. Speed gears are divided into L, 1-9, H and A. The speed increases with the gradual increase of the gear.

Preset function

1. Add ingredients
   Open the mixing cup assembly, add ingredients, close the mixing cup assembly and turn clockwise until the position mark is aligned. For preset, please ensure that the stirring cavity is dry before adding the ingredients, and add water above the water level mark in the water tank.

2. Select function
   Press the “Menu” button to select the function you want to preset.
   Preset only applies to the heating function. “Juice/Smoothie™ and other non- heating functions cannot be preset.

3. Time selection
   Press the “Timer” button to select the desired time. For each press, the time will increase by 15 minutes, such as 6 hours and 15 minutes, 6 hours and 30 minutes. Long press can quickly increase the time.
   The preset time is the time spent in making. Deviation of ingredients and water temperature will lead to a slight deviation in the completion time, which is a normal phenomenon.
   If the preset time is shorter than the pulping time, the machine will start working directly without preset.

4. Start function
   After pressing the “Start/Cancel” button, the machine starts the countdown; Long press the “Start/Cancel” button to cancel the current making function and re-select the function.

Cleaning and maintenance

Clean the stirring cup body

1. Select function
   Press the “Menu” button and select the “Clean” function. When the “Menu” button is pressed for the first time, the screen will display 20 minutes for deep cleaning; Cleaning detergent can be added to the cup for deep cleaning. The second time you touch “Menu”, the screen will display 5 minutes for quick washing.![Joyoung L12 Y521 US01 Hands Free Washing Blender Mixeur Automatique

• Function](https://manuals.plus/wp- content/uploads/2023/04/Joyoung-L12-Y521-US01-Hands-Free-Washing-Blender- Mixeur-Automatique-Function.png)

  2. Start cleaning
     After pressing the “Start/Cancel” button, the machine starts the countdown.

Maintenance

1. After about 30 times of use, the “Clean” function will flash after the machine is powered on, indicating the need to use the “Clean” function for maintenance. It is recommended to add an appropriate amount of tea scale cleaner (about 8 g) to the stirring cavity and press “Start/Cancel”, and the machine will be maintained and cleaned. After each cleaning, please wipe all parts of the machine clean and dry before storage. Tea scale cleaner can be purchased in stores or online. Do not use baking soda, detergent, and other cleaning aids that can produce intense foaming!
2. Please clean the mixing cup assembly regularly, take out and clean the vent valve.
3. Please clean and wipe the pulp outlet at regular intervals.

Clean parts

Pulp cup and cup lid| Water tank and tank cover| Residual water box and box cover| Mixing cup assembly

1. The above four parts can be taken down and rinsed under the faucet!
2. If the making function is interrupted due to excessive ingredients or abnormal power failure, the machine will start the automatic water inflow and do not choose the corresponding function for the second making! Select the “Speed” function to crush and drain the ingredients in the stirring cavity, and then press the “Menu” to select the “Clean” function for automatic cleaning.
3. After making the drink, the steam outlet of the mixing cup assembly should be cleaned from time to time to avoid odor and bacteria. After cleaning, dry the mixing cup assembly to avoid water inflow.
4. After the machine parts are cleaned, it is recommended to be dried or air-dried and assembled into the whole machine and stored in a dry and ventilated place.

Trouble removal

Plug the power cord properly
Machine display board out of order| Please contact customer service
The machine has entered the sleep mode because it had not been operated for a long time| Touch the button with your finger to wake up the machine
The display screen doesn’t light up and the machine is not working| Function program is not selected program| Select the appropriate functional
The water tank is not filled with water or set in place| Fill water to the water tank to the water level scale and put it in place
Water cannot enter into the stirring cavity| Water pump is abnormal| Please contact customer service
The filter screen at the base of the water tank is blocked| Please contact customer service
The motor keeps running without stopping| Water gets into the machine| Please contact customer service
The machine keeps heating without stop| The temperature sensor is abnormal| Please contact customer service
No response to touch| The power cut interval is short and the system is not reset| power off for 2 minutes before use
Display board key is out of order| Please contact customer service
The ingredients cannot be smashed| Too many or too few ingredients| Please add the ingredients according to the recipe amount in the manual
Malfunction of the machine itself| Please contact customer service
Selected the wrong function program| Select function program correctly
Pulp overflow| Selected the wrong function program| Select function program correctly
Too many or too large ingredients| Please add the ingredients according to the recipe amount in the manual
Malfunction of the machine itself| Please contact customer service
Vent valve is blocked| Clean the vent valve
Drink processing time is too long, others normal| The water temperature is too low| Use normal temperature water
Selected the wrong function program| Select function program correctly
The pulp is not normally discharged in the pulp cup| The pulp cup is not in place| Put the pulp cup in place
The pulp discharge valve is abnormal| Please contact customer service
The waste water is not discharged into the residual water box| The residual water box is not put in place| Put the residue water box in place
The pulp discharge valve is abnormal| Please contact customer service
Abnormal whistle| The machine running in| Occasional whistling is normal
The ingredients cannot be discharged
completely| Too many ingredients are put into the machine| Please put in the ingredients as instructed in the recipe
Abnormal power off| | After the power is on, the whole machine is re-set. Use the “Speed” function to crush and drain the ingredients from the cavity. After cleaning, the ingredients can be added again for making

Fault code
Error notification: The error notification and solution are displayed on the touch screen

2. If the pulp cup is not put in place or if the pulp cup is not removed when the residual water is discharged, the fault light will indicate by flashing, and the digital tube will display CUP (when the residual water is discharged and the alarm is raised because the pulp cup is not removed, the heating and stirring process will be carried out in 1 gear for 305 per minute to prevent dryness. This process will continue for 2H, after which no stirring and heating process will be carried out)| 1. Tighten the mixing cup assembly;
2. Correctly put the pulp cup according to the instructions.
E03/E04| The high/low voltage signal is abnormal| The home voltage is abnormal. Please try again later
E 05| Cup body NTC open circuit| For product breakdown, please contact customer service
E 06| Cup body NTC short circuit or greater than 150°C| For product breakdown, please contact customer service
E 07| Communication between the control panel and power panel is abnormal| For product breakdown, please contact customer service
E 08| No motor current, or abnormal Hall signal| 1. Power on again after turning off for 5 minutes. If the fault still exists,
please contact customer service;
2. Too many ingredients cause blocking. Let it stand for 30 minutes and use the speed function to stir and drain the ingredients
E 10| There is no electric current when heating above gear 8| Too many ingredients lead to pasting.
Power on again after cleaning and turning off for 10 minutes. If the fault still exists, please send it to the local after-sales service for repair
E 12| There’s electric current in the standby state| For product breakdown, please contact customer service
E 13| Unable to reach the specified temperature when heating.
Fail to reach 85°C after 20 minutes of heating| Please make it anew
E 25| Rotating valve out of order| For product breakdown, please contact customer service
E 28| The water pump breaks down| Add water to the water tank above the required water line
E 33| Abnormal water pump grating| For product breakdown, please contact customer service
E 37| Abnormal current of th electromagnet| For product breakdown, please contact customer service
E 38| Too many ingredients| Use the “Speed” function to crush and drain the ingredients from the cavity. After cleaning, the ingredients can be added again for making

Tips:
If the problem cannot be solved, do not dismantle the machine without permission. If the above content is inconsistent with the actual product due to the change of model or parts, please take the actual product as the standard, without prior notice, please understand!

Any problems, please feel free to contact us at any time
Hangzhou Joyoung Household Electric Appliances Co.,Ltd.
 support@joyoung.com
© No.760 Yinhai Street, Hangzhou,Zhejiang, China
The enterprise has passed
1S09001 International Quality Management System Certification

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>