bol com Smart Anti Snoring Device Owner’s Manual
- June 10, 2024
- bol com
Table of Contents
bol.com
Smart Anti Snoring Device
Owner’s Manual
Smart Anti Snoring Device
Tips: If the skin is dry in autumn and winter, if the initial user feels tingling, apply a moisturizing lotion to the application area for better effect.
Product Parameters
Product Name: Smart anti-snoring device
Product Aize: 502012mm
Product Weight: 13.7g
Rated Voltage: 3.7V
Charging Requirements: 5V
Accessories list: Host + adjustable lanyard 1
USB data cable1Manual*1
-
Press and hold the power button for 2 seconds to power on.
-
Short press the power button to adjust the intensity.
-
The default intensity of power-on is 1 gear, a total of 6 gears are cyclically selected (constant light indicator
The number of lights is the number of gears). -
During operation, the blue indicator light is always on.
-
The blue light flashes during the charging process, and the blue light is always on when fully charged, and it cannot be turned on during charging.
Function description
Product starting conditions: 1-2 seconds after receiving the sound source
signal, 2-3 seconds for operation, about 10 seconds for continuous operation,
and cyclic operation. This product accurately recognizes snoring through sound
recognition technology. After recognition, the product will send outa slight
pulse to physically intervene the user from weak to strong, so as to achieve
the effect of stopping snoring.
Note: the intensity of product intervention varies from low to high.
Please select the working mode suitable for you.
Matters needing attention
- Do not put this product into a fire source
- Please keep the product out of the reach of children
- Do not wash with corrosive detergent or water
- Do not use a power adapter with more than 5V to charge
- Do not charge for more than 2 hours
Disposal method of rechargeable battery
- The built-in rechargeable lithium battery of this product contains substances that may pollute the environment. When discarding this product, please do not put it together with general domestic waste, and take out the battery.
- Before disassembling the product and taking out the lithium battery, be sure to turn off the power or power off.
- Take out the lithium battery, pry the buckle of the upper cover of the product, open the upper cover of the product, and then take out the lithium battery.
- The lithium batteries taken out should be disposed of safely and put into the battery recycling center designated by the government, which is conducive to environmental protection. Special note: take out the battery only when discarding the product. Before taking out, please make sure that the battery has been exhausted. Do not disassemble it by non professionals.