TradeShowBooth 10ft QuickZip Curved Instruction Manual
- June 10, 2024
- TradeShowBooth
Table of Contents
TradeShowBooth 10ft QuickZip Curved
BOX CONTENTS
Assemble the Frame
Connect the poles by matching up the numbers. Insert center support pole into the middle of curved poles.
Match numbers 1 to 1, 2 to 2, etc.
Install the Graphic
Carefully pull the graphic print over the frame, from left to right, pulling both sides along evenly.
It helps to have a second person to pull the other side simultaneously.
Attach LED Lights (Optional)
Attach light clips to the frame (knobs facing back) and tighten until secure.
Slide LED lights into the top grooves.
To avoid stripping the light clips, do not twist the knobs too tight.
Align the Display
Stand up the frame and shift or wiggle the corners until it’s aligned and
standing upright. Plug in your lights and your display is ready for action!
You can adjust the frame alignment by having a person on each side gently shift the top corners until the display stands completely straight.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>