pond boss 52768 Low Water Auto Shut-Off Fountain Pump Plus Light Instructions
- September 5, 2022
- pond boss
Table of Contents
pond boss 52768 Low Water Auto Shut-Off Fountain Pump Plus Ligh
CARE AND MAINTENANCE – PUMP
- Regular cleaning of the pump may be necessary depending upon the environment in which it is operated. Clean the pump when it is visibly soiled or when a drop in performance is detected.
- Before cleaning, always disconnect the pump from the power source.
- Remove all parts from the pump and clean in warm, soapy water.
- Disassemble the pump cover and remove the impeller cover to expose the impeller assembly.
- Remove the impeller assembly by gently pulling on the impeller blades. Use a soft cloth or brush to clean the impeller assembly and the inside of the impeller housing.
CARE AND MAINTENANCE – LIGHT
- Periodically, your light may require cleaning for optimal performance.
- Cleaning should only be done with warm soapy water. Be sure to use biodegradable soap.
- The frequency of cleaning depends upon the conditions of the environment where the light is used.
TROUBLESHOOTING
If the pump fails to operate:
- Check to make sure the power cord is plugged in, the pump is getting power and the pump is fully submerged.
- Check the pump outlet and any tubing, fountains, spitters etc. for kinks or obstructions.
- Remove the inlet screen and/or pump cover, and impeller cover to expose the impeller.
- Turn the impeller to ensure that it is not broken or jammed.
- If the performance of the pump is not satisfactory or the pump does not flow evenly:
- Check to make sure the pump is completely submerged in water.
- Check to make sure the impeller, water sensor and the housing are clean.
- Adjust flow control.
NEED HELP
PLEASE CALL 1-888-755-6750 BEFORE RETURNING TO THE STORE.N WWW.THEPONDBOSS.NET
Read User Manual Online (PDF format)
Loading......