speco technologies M19LED2 LCD Monitor with HDMI User Manual

M19LED2 LCD MONITOR with HDMI
M215LED2 LCD MONITOR with HDMI  Speco Technologies
200 New Highway
Amityville, NY 11701
800-645-5516
www.specotech.com

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS.

CAUTION:

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

Important Information

IMPORTANT SAFEGUARDS

1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated.
2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS All operating and usage instructions should be followed.
5. CLEANING Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Clean only with a dry cloth.
6. ATTACHMENTS The manufacturer of this unit does not make any recommendations for attachments, as they may cause hazards.
7. WATER AND MOISTURE Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.
8. ACCESSORIES Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury, and serious damage to the unit. An appliance and cart  combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
9. VENTILATION Slots and openings at the rear cabinet and bottom are provided for ventilation, these are to ensure reliable operation of the unit, and to protect it from overheating. These  openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been  adhered to.
10. POWER SOURCE This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company.
11. POWER-CORD PROTECTION Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to  cords at plugs, convenience receptacles, and the point where they exit from the appliance.
12. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable  system. This will prevent damage to the unit due to lightning and power line surges.
13. POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall onto or against such power  lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.
14. OVERLOADING Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.
15. OBJECT AND LIQUID ENTRY Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock.  Never spill or spray any type of liquid into the unit.
16. HEAT The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
17. CONNECTING When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause a product damage.  Read the owner’s manual of the other equipment carefully and follow the instructions when making any connections.
18. LCD Do not press on or jolt the LCD panel. Doing so may cause the LCD panel glass to break and injury may occur. Should the LCD panel be broken and liquid leaks out, do not inhale or  swallow it. Doing so may cause poisoning. If you have got it into your mouth, wash it out and consult your doctor. If your hands or clothes have touched it, wipe them with alcohol and a cleaning cloth and then wash them well.

Federal Communications Commission (FCC) Statement
This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to  radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

l You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference  received including interference that may cause undesired operation

Feature

1. Professional TFT LCD for surveillance.
2. Compatible with VGA(640 x 480), SVGA(800 x 600),XGA(1024 x 768), SXGA(1280 x 1024) , WXGA(1360 x 768), WXGA+(1440 x 900), WSXGA+(1680 x 1050), (1920 x 1080) resolution, support HDMI1080p
3. All plastic case.
4. Video input HDMI x 1 / BNC x 1 / VGA x 1.
5. Video output BNC x 1.
6. Support media player USB x 1,.
7. Audio input RCA x 2 / phone jack x 1.
8. Audio speaker x 2.
9. High brightness level and contrast ration with super wide viewing angle.
10. Built-in 3D comb filter and 3D de-interlace for crispy picture performance.
11. Fast response time and refresh rate without time lagging.
12. Support 6500K、9300K color temperature selection.
13. Video Inputs support NTSC / PAL standards.
14. Video looping Output supports 75ohm auto termination.
15. VESA standards (100mm x 100mm) bracket.

Exploring Your New Monitor

You can operate your monitor by using the buttons on the front panel. The side panels provide the inputs to connect other equipment to your monitor.
Front Panel

Select menu function / – VOL+
3|
4| Menu item down button
5| Menu item up button
6| Video source select button / enter
7| IR receiver
8| Power button

Backside Connections

Back Panel

1. Power in :DC 12V input

2. HDMI: HDMI input(1080p)

3. VGA: VGA input.(VGA cord pin4 and pin11 N/A)

4. PC AUDIO IN: PC audio input

5. AUDIO IN/OUT: RCA jack

6. VIDEO IN: Camera or DVR source input
   VIDEO OUT: Video looping output

7. USB: MP3, JPEG, MPEG4.

Setup your Monitor

– VOL+:
▼ ▲ :| Select menu function / Increase or decrease the value on OSD menu.
+: Increase value
-: Decrease value
SOURCE:| Select input signal from AV / HDMI / VGA (PC) or USB
Enter function
POWER:| Monitor power ON / OFF. At OFF mode, monitor will be at standby status.
Green Light: ON
Red Light: OFF

Picture setting

[Picture Mode]     Contrast:   Brightness:|  Select the picture mode to Standard, Dynamic, Soft or Personal.
Permits adjustment of contrast between light and dark areas of the picture.
Adjustment the intensity of color.
---|---
[Color Mode]| Cool、Normal or Warm.
[3DNR]| Off、Weak、Middle or Strong.
[Backlight]|  Adjust backlight.
[DLC]|  Dynamic luminance control on/off

Audio Setting

[Equalizer]|  Select the Equalizer mode to Standard、Music、Movie、Sports or Personal.
---|---
[Volume]| Control built-in speaker volume.
[Mute]| Mute on/off

Setup

60sec.
[Restore Default]| Reset the device to default status.
[Screen Rotation]| Rotate screen.
[Software Update(USB)]| Update F/W

Option

[VGA Mode]

pixel clock across one line time. Therefore  it can affect the picture position and size.
Note: improper adjustment will caused image failure.
Phase:| Is used to adjust best picture quality. It adjusts the sampling phase across one pixel time. When the phase is not  adjusted properly, the picture will be unclear. Therefore this value should be carefully adjusted.
Note: improper adjustment will cause image failure.
Auto :| Auto adjusting.

Applicable Timing

VGA Timing

Resolution| 1-1 Freq.
(kHz)| V Freq.
(Hz)| Pixel clock
(MHz)| 19W (18.5″)| 22W (21.5″)
---|---|---|---|---|---
19201080
60Hz| 19201080
60Hz
640×350@70| 31.| 70.| 25.| •| •
640×480@60| 31.| 59.940| 25.| •| •
640×480@72| 38.| 73.| 31.500| •| •
640×480@75| 37.500| 75.000| 31.500| •| •
800×600@56| 35.| 56.160| 36.000| •| •
800×600@60| 38.| 60.| 40.000| •| •
800×600@72| 48.| 72.| 50.000| •| •
800×600@75| 47.| 75.000| 49.500| •| •
1024×768@60| 48.| 60.| 65.000| •| •
1024×768@70| 57.| 70.| 75.000| •| •
1024×768@75| 60.| 75.| 78.750| •| •
1152×864@75| 67.500| 75.000| 108.000| •| •
1280×720@60| 45.000| 60.000| 74.250| •| •
1280×76860| 47.| 60.| 68.250| •| •
1280×1024@60| 63.980| 60.000| 108.000| •| •
1280×1024@70| 75.| 70.| 127.000| •| •
1280×1024@75| 80.| 75.| 135.000| •| •
1366×768@60| 48.540| 59.930| 80.000| •| •
1680×1050@60| 146.250| 65.290| 60.| •| •
1920×1080@60| 67.500| 60.000| 148.500| •| •

HDMI Timing

PC RGB Inp

Power Supply

Environment

LCD Color Monitor Specification

sec
Video Input / Output| HDMIx1. Video In x 1 (BNC), Video Out x 1 (BNC), VGA x 1,
Audio Input| Audio In x 2(L/R), PC-Audio In x 1
Operating Temperature| 32″F – 122″F
Storage Temperature| -4″F – 140’F
Dimension| 443(W) x 348(H) x 60.5(D)mm| 516(W) x 411.4(H) x 55(D)mm
Weight| N.WJG.W.: 6.6141b ( 61b 9.822 oz)/ 9.921Ib (91b14.73 oz)| N.W./G.W.: 7.9371b (71b 14.99 oz)111.681b (11Ib10.95oz)

1. The brightness specification is from panel spec, it is not guaranteed for all the specified range.
2. Design and Specifications are subject to change without notice.

*VESA mount M4x10L

Dimensions

|
---|---

Unit: mm
85-ML19W4-A002G-B

Spec Technologies
200 New Highway
Amityville, NY 11701
800-645-5516
www.specotech.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>