FreeStyle Libre 2 Blood Glucose Sensors Get 1 Glucose Reader User Guide
- June 10, 2024
- FreeStyle
Table of Contents
FreeStyle Libre 2 Blood Glucose Sensors Get 1 Glucose Reader
Setup Overview
iPhone
Download FreeStyle Libre 2
from App Store
Android phone
Download FreeStyle Libre 2
from Google Play Store
Assemble and Apply Sensor to the back of your upper arm
Select site on back of upper arm.
Do not use other sites as these may result in inaccurate glucose readings.
Note: Avoid scars, moles, stretch marks, lumps, and insulin injection sites.
To prevent skin irritation, rotate sites between applications.
Wash site using a plain soap,dry, and then clean with alcohol wipe. Allow site to air dry before proceeding.
Peel lid completely off Sensor Pack.
Unscrew cap from Sensor Applicator.
CAUTION: Sensor codes must match on Sensor Pack and Sensor Applicator or
glucose readings will be incorrect.
Line up dark mark on Sensor Applicator with dark mark on Sensor Pack. On a hard surface, press down firmly on Sensor Applicator until it comes to a stop.
Lift Sensor Applicator out of Sensor Pack.
Sensor Applicator is ready to apply Sensor.
CAUTION: Sensor Applicator now contains a needle. Do not touch inside
Sensor Applicator or put it back into Sensor Pack.
Place Sensor Applicator over site and push down firmly to apply Sensor.
CAUTION: Do not push down on Sensor Applicator until placed over prepared
site to prevent unintended results or injury.
Gently pull Sensor Applicator away from your body.
Make sure Sensor is secure.
Discard used Sensor Applicator and Sensor Pack according to local regulations.
Set up App
Check that your smartphone is connected to a WiFi or cellular network. Tap
Sign In or GET STARTED NOW.
Review the legal information and follow instructions to set up a LibreView
account or login to your existing account.
Enter your personal settings.
Tap NEXT after each screen.
Review the important information on the screen. Accept the requested permissions. Tap NEXT to proceed until you see the Scan New Sensor screen.
Use the App to scan your Sensor
How to Scan
iPhone: Tap scan button . You can either tap the blue box on the Home Screen
or at the top right. Hold top of iPhone near Sensor until you get a tone
and/or vibration.
Android phone: Hold back of Android phone near Sensor until you get two tones
and/or vibrations.
Scan your Sensor to start it.
Note: Before you start your Sensor choose which device you want to use.
If you start the Sensor with the App, you will be unable to use the Reader to
check your glucose or receive alarms.
The Sensor can be used to check your glucose after the start-up period. While the Sensor is starting up, you can navigate away from the App.
Scan your Sensor to get your glucose reading
Alarms with a FreeStyle Libre 2 Sensor
Alarms are on by default. To change their settings or turn alarms off, follow
these steps.
IMPORTANT: Glucose alarms are an important safety feature. Please consult
your health care professional before making changes.
Tap Alarms.
Select the alarm you want to change.
Tap to change your settings. Tap SAVE after each selection.
Swipe or tap to dismiss the alarm and check your glucose. You must scan your Sensor to see your glucose reading.
Example screens displayed for iPhone
If you have followed the instructions described in the User’s Manual and are still having difficulty setting up your System or if you are not sure about a message or reading, contact your health care professional.
The circular shape of the sensor housing, FreeStyle, Libre, and related brand
marks are marks of Abbott. Other trademarks are the property of their
respective owners.
©2018-2022 Abbott ART40977-401 Rev. A 04/22
Consult instructions for use
Manufacturer