tuya TL-AH708 Touch Screen HD Wireless Video Door Phone User Manual

TL-AH708 Touch Screen HD Wireless Video Door Phone
User Manual
FCC ID:2AW63TL-AH708
1C:29732-TLAH708

Product description

1. 7 inch display(optional)
2. Outdoor camera

Tuya App Download

1. Download: Search Tuya app in smartphone app store to download and install the Tuya app.
2. Register: After selecting location then use email address or phone number to register. Users also can log in with a third-party social media account.

• If can not search the Tuya app in app store, please use browser to scan the below QR code to download the app.

https://smartapp.tuya.com/tuyasmart

Installation preparation

Check packing contents
Outdoor camera installation

Installation position
* Note
Avoid camera from direct sunshine. At darkness, if camera is intensely illuminated by street light or light emitting object, installing lamp near to doorbell i s needed to enhance camera imaging.
Doorbell camera installation

Warm reminder: After installing the doorbell, please use the side screw to fix the doorbell battery as show in Pic4 to avoid poor battery power connection.

Home management and device sharing

1. Home management
   New user register and log in(Pic1), click”Me, select”Home Management”(Pic2), click”My Home”(Pic3), “Home Name “you can set the home name as you like, maximum of 25 characters can be entered(Pic4)“Location”will be set according to your mobile phone location, or you can set as per your real location(Pic1), then click”OK”to confirm(Pic2). You can use default room name, also can click “Room Management”to set name for the rooms , maximum of 25 characters can be entered(Pic3). After completing Home Management setting then back to the home page. Home page showing “Weather, temperature, home name, etc”.

2. Add family members
   Go to Home Management page, select the created home, click “Add Member”(Pic1), Tia app account”(Pic2), input the member’ s account which you want to add. The invited member’ s Tay app will get a invitation message, you can check in the “Message Center”(Pic5), then open App, Click “Me”and go to “Home Management”, then click “wait to join”and click “Accept”to join(Pic4), will show the jointed home in the “Home Management”page. And administrator’s Home Setting page showing the added member’ s Tuya account(Pic6).

Product operation instruction

https://youtu.be/6FnYQWgCEKk
Please scan QR code to watch Product operation instruction

Pair the 7 inch touch screen with Tuya app

1. Power supply the indoor screen monitor , it will turn on automatically .

2. Select “Display”-“WLAN”, go to WIFI setting interface.

3. Open “WLAN” , click “add network” go to WIFI searching interface.

4. Select your home used 2.4G/5G WIFI , and input the password, then press “Connect”.

5. After setting successfully back to WIFI setting interface, it will obtain the IP address.

6. Open Tuya app , click “+” on top right corner, then click “Scan”

7. Scan the QR code on the top left corner of the screen monitor to add the device

8. Press “Done” on app, adding device completed.

9. Press the QR code on the top left corner of the screen

10. Use Tuya to Scan the QR code

Working principle

Function introduction

1. App main page introduction
2. Notification setting

Visitor call (doorbell)
If visitor make call from outdoor camera, smart phone Tuya app will receive call notification, you can answer the call, and the video will be stored in TF card. If not answer the call it will automatically end after 30 seconds. During intercom press lock button can open the lock( need unlock module wiring with lock ). Intercom will end automatically after 90 seconds and doorbell back to standby status
Real time monitoring
If you want to know the outdoor situation you can open app to active the monitoring function to see the video of the outdoor. During monitoring you can operate to take photo, record video, full screen viewing, set video image quality, talk to outdoor unit, open lock, etc.
Storage functions
TF card on indoor screen can store all the video data, like motion detection video, calling video, monitoring video, and you can see all the videos through Playback or in message center on indoor screen. Also can view the videos through Playback on App and download the videos you need. You can check TF card capacity under menu of “Display-TF card” on indoor screen.
Share device
You can add friends and relatives in Home Management.After successfully adding, all members can use the device.
Other operations
“Camera-Setting-Tone settings” can mute the microphone for motion detection function. “Camera-setting-Power management setting”, LED button is opened in default setting, and the LED light will bright when active motion detection, monitor, call function. if close it the LED light only bright when visitor make a call.

Motion detection
When the outdoor camera detect motion detection, will send message to smartphone Tuya app and record the video. You can review the videos in Playback menu. You can set the PIR motion detection sensitivity.

1. Go to monitoring page
2. Select PIR motion detection sensitivity
3. Screen showing human Icon after setting

Basic ICONS and related Settings on screen monitor

Main interface function diagram

1. Add WLAN

2. Press “Display” then select) “WLAN”

3. Press “Camera” enter to camera interface

4. Select the WIFI your phone used, then input W I F password, and press “connect”

5. Connect successfully

6. Motion detection setting
   

7. Press “Camera” enter to camera interface.

8. Press “Setting”

9. Select “Motion detection settings”

10. Select low, middle, high sensitivity

11. Playback
    

12. Press “Camera” enter to Camera interface

13. Press “Playback” enter to playback interface

14. Drag the timeline to view the video

15. Choose time to view the video

16. Message
    

17. Press “Camera” enter to Camera interface

18. Press “Message” enter toc message interface

19. Flip to check the videos

20. Press “Unlock record”can check the unlock records

21. Monitoring duration setting
    

22. Press “Camera” enter to Camera interface

23. Press “Settings” enter to setting interface

24. Select “Monitor time setting”

25. Set monitoring duration as per your need

26. Outdoor camera v o l u m e setting
    

27. 1. Press “Camera” enter to Camera interface

28. Press “Settings” enter to setting interface

29. Press “Volume s e t t i n g s “

30. Set intercom volume and ring tone volume as per your need

31. Indoor screen volume setting
    1.Press “Volume” in system setting interface
    2.Set talk volume as per need

32. Notification setting

33. Press “Camera” enter to Camera interface.

34. Press” Settings”go to setting interface

35. Press “Push settings

36. Turn on or close the PIR or CALL notification as per need

37. Tone setting
    

38. 1. Press “Camera” enter to Camera interface

39. Press” Settings”go to setting interface

40. Press “Tone settings”

41. Turn on or close the protectionism calling tone as per need

42. Indoor screen ring tone setting
    

43. Press”Display” go to display setting interface

44. Press “Ring” enter to ring tone setting interface

45. Set calling and PIR’s ringtone volume and ring oration

46. Select the ring tone as per need

47. Intercom between indoor screen and outdoor camera
    Press “camera”on screen enter to camera interface, then press the PLAY i con, you can see live video of outdoor. Press the ANSWER com to active the microphone then can talk to doorbell camera.
    If visitor make call from outdoor camera indoor screen w i l l ring and show live video. The top screen will show microphone icon after answer the call, and you can talk to the visitor.

AC/DC wiring instructions

1. Put the wiring board into the corresponding AC/DC hole on the back of the video doorbell, and then fix the screws.
2. Use the matching push-type quick-connect terminal, keep one end pressed down, insert the wires of the terminal block individually and release.
3. The other end also remains pressed down to connect to the external power supply, regardless of positive and negative pole, just connect to the terminalthen release. Please note that the external power supply AC: 8-24V, DC: 8-36V.

Connect the holes to the terminal board and fix the screws| Press and hold one end of the terminal block and connect the wires to the ports| Press and hold the other end of the terminal, regardless of positive and negative, connect the cable of the external power supply to the port.

Lock wiring diagram (Optional)

In intercom or monitoring status press unlock button can open lock for visitor. Caution: The unlock module already paired with the device in factory, no need to pair again. If prompt not paired please confirm with your after sales service and refer the below operation.

1. Please wire the lock with the Unlock module as per the diagram, then connect to electricity power supply .
2. Long press the pair button on unlock module for around 5 seconds till the red light tinkle 3.Indoor display in monitoring status, press the unlock button to open lock, the lock is unlocked and the unlock module will sound “di” , prompt pairing successfully.

 After pairing successfully, you can set the unlock time, default unlock time is 1 second. Press one time the button on the unlock module„ red indicator light slowly twinkle three times, set unlock time 3 seconds. Press one time again the button on the unloik module, indicator light slowly twinkle five times, set unlocktime 5 seconds. Press the button one time again, indicator light slowly twinkle eight times, set unlock time 8 seconds.

Precaution

1. Do not place the visual intercom system near places with strong magnetic fields;
2. Do not directly spray water or other liquids onto the visual intercom system;
3. Do not hit the display screen or doorbell heavily;
4. Do not expose to sunlight or place under strong reflected light;
5. Do not install a visual intercom near ammonia and toxic gases;
6. There is high voltage current inside the system. Do not disassemble this device casually;
7. Do not use cleaning agents or other chemical solvents to wipe the doorbell and display screen;
8. The display screen is recommended to be placed at a height of more than one meter. Do not straighten the door bell
9. If the machine fails, do not disassemble it by yourself. Instead, send it to a local maintenance point for maintenance or contact our company directly After sales service contact;
   Warm tips: Stand up the antenna during use, it will reach longest range.

 Trouble shooting

1. No notification to phone app after making a call
   (a) check whether the indoor screen paired with the outdoor camera and whether paired with the app.
   (b). Check whether notification permission to APP is allowed on mobile phone setting.
   (c). Check whether opened the notification in APP setting.

2. Smart phone no sound in intercom mode
   (a). check whether mobile allows APP to access microphone and record audio
   (b). Check whether the microphone of the doorbell camera is blocked up

3. App showing gateway off line
   (a). Please check whether smartphone connect WIFI or 4G or 5G net.
   (b). Check indoor screen whether connect WIFI or please restart the screen machine.

4. Indoor screen no response or no ringtone after making a call
   (a).Check “Display-Camera”if indoor screen paired with outdoor camera,
   (b).Check “Display-Ring”if turned of the ringtone
   (c).Check if the signal between indoor screen and outdoor camera is interfered or exceeded the applicable distance.
   (d).Check if the call tone is turned off in ” Camera -Tone setting”
   (e).Check if Turned on the “Mute switch” on screen monitor

5. No voice in indoor display during communication
   (a). Check if indoor display microphone is blocked up
   (b). Check if outdoor camera microphone is blocked up
   (c). Check if volume is turned off in volume setting

6. 7 inch touch screen pair with outdoor camera
   Caution: the outdoor camera and indoor screen was paired in factory, no need to pair again. If prompt not paired please contact your after sales service before doing below operation.https://youtu.be/-uBHQ8XUCaA
   Please scan the Q R code to view the product pairing instruction

7. 1. Power on both indoor display and outdoor camera.

8. Reset the display to factory setting.

9. Press “Display-Camera-Add device” on display .

10. Fast press three times the Pair hole button on outdoor camera

11. Both devices sound “Duan” to prompt pairing succeed.
    Attention:
    

12. One screen only can pair with only one app account, but the master user can create a home and invite members to to home and share to use the device.

13. If need to reset the indoor screen , press”Display”-“About”go to “Device information”then press “Reset factory setting”. After resetting factory setting the product will lost connection, have to pair again.

14. No notification on smart phone
    (a)Please turn on all the notification permission

    1. Application permissions|  2. Huawei notification setting| 3.I05 notification setting

Technical parameters

Indoor screen

Outdoor camera

This manual is only for the product use instruction, all interpretation rights are reserved by the factory. Factory continues to optimize the product and adjust the technical parameters accordingly without prior notice. If you have any questions. please contact customer service.

FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning impediment off and on, the user is encouraged to try to correct the interference by one or more of the following measa

Smart Home Starts from” Acebell”

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
ISED Statement : This device complies with Industry Canada license – exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES – 3 (B)/NMB 3(B).
Caution: (i) The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems’ (ii) For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the EIRP limits specified for point-to-point and non-point-to-point operation as appropriate;

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>