EVOLVEO SEA DET-WNSCAM SMART Replacement Wireless Camera User Manual

June 10, 2024
Evolveo

SEA DET-WNSCAM SMART Replacement Wireless Camera

EVOLVEO-SEA-DET-WNSCAM SMART-Replacement-Wireless-PRODUCT-
IMAGE

Product Information

  • Product Models: EVOLVEO Detective IP8, EVOLVEO Detective POE8,
    EVOLVEO Detective WN8

  • Product Version / Date: l. / 12. 7. 2022

  • Languages: CZ, SK, EN, HU, RO

  • Functions: The camera can be connected to local networks and paired with the EVOLVEO Detective POE8/IP8 or WN8 SMART NVR system.
    It is equipped with IP66 protection and can function despite weather conditions such as rain and snow. The product also has a warranty that covers specific damage types.

Product Usage Instructions

  1. Connecting the Camera to a Local Network

    • Ensure that the camera and network video recorder and hard disk drive are on the same LAN.
    • Connect the camera according to the type of NVR system: EVOLVEO
      Detective IP8, EVOLVEO Detective POE8, or EVOLVEO Detective WN8.
  2. Pairing

    • Pair the camera with the EVOLVEO Detective POE8/IP8 or WN8 SMART NVR system.
    • Follow the pairing instructions provided in the manual of each individual NVR system.
    • Visit www.evolveo.com for product manuals in the Downloads section.
  3. Camera Installation

  4. Drill three holes in the wall plate according to the position of the holes in the camera base.

  5. Insert plastic dowels into the holes.

  6. Align the holes of the camera base with the plastic dowels and secure the camera with screws.

  7. Frequently Asked Questions

  8. Q: After scanning the QR code, a prompt appears to check the network connection. How do I resolve this?

  * A: Ensure that the network video recorder is connected to the Internet. Scan the QR code again.
2. Q: How do I check if the camera is properly connected?
  * A: Check that the adapter is plugged in correctly and the power cord is inserted if necessary. Restart the device by reconnecting the power supply. Reconfigure the camera. Check that the camera is properly connected to the local network (status LED on the connector is flashing) and on the same network and IP range as the NVR unit.
3. Q: What precautions should I take when using the camera?
  * A: To get a better image in night IR, do not use the camera with reflective objects such as glass and white walls directly in the camera’s view. This can cause the image to be overexposed from these objects.
4. Q: Is the camera waterproof?
  * A: Yes, the camera is equipped with IP66 protection and can function despite weather conditions such as rain and snow. However, ensure that the power connector and mains connector are covered to maintain its degree of protection.
  1. Disposal
    • Dispose of the product, batteries, and accumulators separately as part of sorted waste at the end of their useful life. Do not dispose of these products in unsorted municipal waste.

Connecting the camera to a local network

Remark: Make sure that the camera and the network video recorder and hard disk drive are on the same LAN.

Then make the connection according to the type of your NVR system:

EVOLVEO Detective IP8 EVOLVEO-SEA-DET-WNSCAM SMART-Replacement-
Wireless-01EVOLVEO Detective POE8 EVOLVEO-SEA-
DET-WNSCAM SMART-Replacement-Wireless-02

EVOLVEO Detective WN8 EVOLVEO-SEA-DET-WNSCAM SMART-Replacement-
Wireless-03

Pairing
Pair the camera with your EVOLVEO Detective POE8/IP8 or WN8 SMART NVR system. The pairing process is described in the manual of each individual NVR system NVR Detective. Please follow the instructions given here. Manuals can also be found at www.evolveo.com on the product page in the “Downloads” section.

Camera installation method

  1. According to the position of the holes in the camera base, drill three holes in the wall plate.
  2. Insert plastic dowels into the holes.
  3. Align the holes of the camera base with the plastic dowels and then secure the camera with the screws.

EVOLVEO-SEA-DET-WNSCAM SMART-Replacement-Wireless-04

Description of functions

  1. Definition: 2M (1920*1080) resolution, high quality and realistic image.
  2. Angle of view: The camera is equipped with 104.45° wide-angle optics
  3. Motion detection: supports alarm function when motion is detected. If an object moves in the detection area, an alarm message is sent to the mobile phone in time.
  4. Human body detection: If a human body is detected in the detection area, an alarm message is sent to the mobile phone in time and image recording is started.
  5. ONVIF support: The camera supports ONVIF and can be accessed from NVRs from different manufacturers.
  6. H.265 encoding: This technology allows you to store more footage in higher quality
  7. Support POE function: It can be powered directly from a wired network and connected to a PoE-enabled NVR.

Frequently Asked Questions

Q: After scanning the code with the QR camera, a prompt will appear: Please check the network connection.
A: Make sure the network video recorder is connected to the Internet. Then scan the QR code again.

Q: How to check if the camera is properly connected?
A:

  1. Check that the adapter is plugged in correctly and that the power cord is inserted, if necessary.
  2.  Restart the device by reconnecting the power supply
  3. Reconfigure the camera.
  4. Check that the camera is properly connected to the local network (status LED on the connector is flashing), and that it is on the same network and IP range as the NVR unit.

Q: Is a higher camera temperature normal?
A: When the camera is operating normally, a certain degree of heating of the camera surface will occur, which is a normal phenomenon. Feel free to use it. Applicable temperature range: -10 °C to +50 °C.

Q: What do I need to look out for when using the camera?
A: To get a better image in night IR, do not use the camera with reflective objects such as glass and white walls directly in the camera’s view, otherwise the image will be overexposed from these objects.

Q: Is the camera waterproof?
A: Equipped with IP 66 protection, the camera will function when exposed to weather conditions such as rain and snow. However, for proper operation it is necessary that the power connector and the mains connector are covered, otherwise the camera loses its degree of protection and the claim cannot be accepted.

The warranty does NOT cover:

  • using the equipment for purposes other than those for which it is designed,
  • installing firmware other than that installed on the device
  • electrical or mechanical damage caused by improper use
  • damage caused by natural elements such as water, fire, static electricity, power surges, etc.
  • damage caused by repairs carried out by an unqualified person
  • illegible serial number
  • battery capacity drops after 6 months of use (6 month battery life guarantee)

Disposal
The crossed-out container symbol on the product, in the accompanying documentation or on the packaging reminds you that in EU countries, all electrical and electronic equipment, batteries and accumulators must be disposed of separately at the end of their useful life as part of sorted waste. Do not dispose of these products in unsorted municipal waste.

CE DECLARATION OF CONFORMITY

Abacus Electric, s.r.o. hereby declares that the product EVOLVEO SEA DET- WNSCAM,
The SEA DET-POE8DOM, SEA DET-POE8CAM meets the requirements of the standards and regulations that are relevant to the type of equipment.
The full text of the Declaration of Conformity can be found at ftp://ftp.evolveo.com/ce

Importer
Abacus Electric, s.r.o.
Planá 2, 370 01, Czech Republic

Producer
Naxya Limited
No.5, 17/F, Strand 50, 50 Bonham Strand, Sheung Wan, Hong Kong
Made in China
Copyright © Abacus Electric, s.r.o.
www.evolveo.com
www.facebook.com/EvolveoCZ
All rights reserved.
The appearance and technical specifications of the product are subject to change without notice.

Information published Value and precision Unit
Manufacturer’s name or trade mark, commercial registration number and address
Zhuhai Bright Source Electronic Science & Technology Co. ,LTD

Model identifier| CYH012S012V1000E| –
Input voltage| 100~240Vac| V
Input AC frequency| 50/60Hz+/-3Hz| Hz
Output voltage| 11.4~12.6Vdc| V
Output current| 1A| A
Output power| 12W| W
Average active efficiency| 82,96%| %
Efficiency at low load (10 %)| 82,71%| %
No-load power consumption| 0.1W| W

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals