Telfun TF5812 5 In 1 Electric Shaver and Grooming Kit User Manual

Telfun TF5812 5 In 1 Electric Shaver and Grooming Kit

Product Information

Product Name: Men’s 5-in-1 Electric Shaver & Grooming Kit

Model TF5812

Parameters

• Charging time: About 3 hours
• Working time: About 90 minutes
• Rated Voltage: 5V
• Power: Rated 5W
• Input: DC 5V1A (or 2A)

Product brief introduction

(a) Shaver (b) Hair Trimmer (c) Comb (d) Sideburns Trimmer (e) Nose hair trimmer cover (f) Nose & ear trimmer (g) Cleaning brush (h) Facial cleaning brush

Note
Please read this manual carefully before use and keep it for future reference. To avoid damage and danger caused by improper use. If you lend this product to others, please attach the instructions.

1. Please use output DC 5V 1A (or 2A) power supply ONLY, DO NOT use fast charge technology (such as 9V 2A, 5V 4A), otherwise it will cause charging failure and even burn the machine.
2. When cleaning the cutter head, in addition to opening the 4 cutter heads around for cleaning, the middle cutter head also needs to be cleaned, otherwise the hair will be clogged and the other 4 cutter heads will also be unusable.
3. Regularly change the cutter head can avoid to nip the hair.
4. Nothing happens when the power button is turned on, please clean the inside of cut head, maybe it is blocked by hair.
5. Insufficient limbs, mental disorders and lack of relevant experience and knowledge (including children) must be used under the supervision and guidance of the guardian.
6. Keep the product and its cables out of the reach of children.
7. Must be used and stored at a temperature between 5 degrees Celsius and 35 degrees Celsius.
8. If the product has a large change in  -sure or humidity, allow the product to acclimate for 30 minutes before use.
9. Please check the product before use, If any parts of the product are damaged, please do not use the product, otherwise it may cause harm to the human body.
10. Do not replace or fix adapter inside accessory .yourself, as this will cause serious consequences.
11. Note that your skin takes a while to get used to this product.

Standards compliant

This product complies with the Technical Certification Code for Electrical Products and related safety laws. According to current scientific evidence, this  product is safe if used correctly and in accordance with the instructions in this manual.
How to use

1. Turn on the power button.

2. Let the cutter head move against the hair growth direction on the skin, move back and forth straight. (Fig 1)

3. Keep the skin that need to be shaved dry, and  shave on dry skin is better.

4. Remove the remained hair in the cutter head after use.

Hair trimmer instruction

Turn off the shaver power, remove the shaver head, insert the hair clipper into the slot of the top shaver. Then press down the hair clipper head parts to installed in the shaver body. (hear the sound like “kaca”) (Fig 2).

Sideburns trimmer

1. Take note that comb your hair according hair growth direction before clip hair.

2. Put on the comb accessories to the slot both sides, the sound like “kaca”, make sure the comb accessories have already fix on slot both sides in true ways (Fig 3).
   

3. The comb accessories have three length “3MM”, “5MM” and “7MM” for clip hair with different length. Replacing the comb accessories direction according to length mark in the bottom (Fig 4).
   Put down the comb accessories from one side slot to another (Fig 5).

4. Open the switch, use it above hair slowly. For good clip effect, please use the product in the different direction from hair growth direction.

Nose trimmer instruction

Turn off the shaver power, remove the shaver head, insert the nose trimmer into the slot of the top shaver. Then press down the nose trimmer head parts to installed in the shaver body. (hear the sound like “kaca”) (Fig 6).

Trim nose hair

1.  Make sure your nose is clean.

2. Open the switch, put the nose trimmer towards your inside nose, turn the nose trimmer to clip your long nose hair (Fig 7).

3. Do not exceed 0.5cm for nose trimmer length inside your nose.

4. To reduce itch, you should put one side of the nose trimmer tip close your skin.

Clip ear hair

1. Clean outside ear, make sure no earwax.

2. Open the switch, then turn the trimmer tip towards your ear to clip your long ear hair.

3. Put the trimmer tip towards your outside earlap slowly. (Fig 8)

4. Do not exceed 0.5cm for trimmer tip length inside your ear.

Using the cleansing brush attachment

Use the rotating brush attachment with your daily cleansing cream. The cleansing brush attachment removes oil and dirt. contributing to a healthy and oil-free skin.

1. Make sure the appliance is switched off and attach the cleansing brush attachment to the appliance. (Fig 9)

2. Moisten the attachment with water. Do not use the appliance with a dry brush head, as this can irritate the skin.

Tip: Use the attachment before shaving for easier shaving and a more hygienic shaving (Fig 10)

1. Moisten your face with water and apply a cleanser to your face.

2. Place the attachment on your right cheek. (Fig 11)

3. Switch on the appliance.

4. Gently move the attachment across your skin from

Use effect

To ensure the effect, please note

1. First make sure the tool is clean.
2. To improve the efficiency and comfort of use, please ensure that the length of the hair is within the controllable range.
3. Keep your hair dry.
4. Cut in the opposite direction of hair growth.
5. Clean the residual hair in cutter head often.

Charging

Plug the charging cable into the shaver, plug USB into 5V 1A USB adapter(Computer / PC / Power Bank / Car Charger).
The digital LCD dynamically display charging status.
Plug the adapter plug into an electrical outlet after confirming that the shaver is power off.

Clean

1. Regularly clean the machine to ensure better shaving and clean the cutter parts once a week.
2. When cleaning, all five cutter heads need to be opened for cleaning.
3. Never use compressed gas, steel wool, abrasive cleaners or corrosive liquids such as gas oil or acetone to clean the product.
4. Make sure the product is powered off and the power plug is removed.
5. Blow or remove the hair from the body ,the cutter head, and the attachment.
6. Clean the power adapter with a cleaning

Cleaning and Maintenance

pull the shaving unit off the shaving head from the center part

Rotate the chip  Counterclockwise and pull it

Storage

With a portable toiletry bag, solve the storage problems caused by complete range of accessories.

Parameters

Product Name| Bald Head Shaver
Model| 5812
Charging time| About 3 hours
Working time| About 90 minutes
Rated Voltage| 5V Rated
Power| 5W Input :DC 5V1A(or 2A)

Note

Please use output DC 5V 1A (or 2A) power supply ONLY, DO NOT use fast charge technology (such as 9V 2A, 5V 4A), otherwise it will cause charging failure and even burn the machine.
Battery charging time about 2 hours, Do not overcharge  the battery for a long time, which will cause the battery to heat up. Reduce battery life.

For best using effect, please notices

• Make sure the shaver is clean.
• This shaver is design for hair under

3-5mm/0.12-0.2inch (Lengths of 3-5 days natural growth), if longer than 5mm, please use hair clipper style cutter to cut the hair shorter first.

• Clean it with the brush

• Put the shaving unit back into the shaving head and Rotate the chip

• press and close the  shaving unit

• insert the shaving head back into the

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>