fingers WL120 Octane Dolby Sound Bar User Guide
- June 10, 2024
- fingers
Table of Contents
Quick Start Guide
WL120 Octane Dolby Sound Bar
Important – Warnings and Safety
- Do not place the speaker near heat sources such as fire, radiators, stoves and other apparatus that produce heat.
- Use only accessories supplied by FINGERS.
- It is recommended to refer all servicing to qualified personnel. Servicing is required when the speaker has been damaged in any way. Any evidence of any attempt to open and/or alter the device, including any scratch, peeling, puncturing, or removal of any of the labels, will void the Limited Warranty.
Care and Maintenance
- Switch off the speaker before cleaning it.
- Use soft cloth to clean the surface.
- Do not use any chemicals, solvents, or cleaning solutions containing alcohol, ammonia or abrasives.
- Do not allow any liquid to enter into any of the openings.
In the box
1 x FINGERS Octane Dolby WL120 (Sound Bar)
1 x FINGERS Octane WL120 (Sub-woofer)
1 x Remote Control
1 x AUX Cable
1 x Power Cord
2 x Wall-mounting Brackets
1 x Screw Set
1 x Quick Start Guide
1 x Brand Note
On-board Controls
| # | Function | Operations |
|---|---|---|
| 1 | Power On/ Stand-by | Shod press – To switch between stand-by 3 operational |
mode
2| Mode| Short press – To switch between BT I USB I HDMI(ARC) I Optical I AUX
Mode
3 +| Next Track/ Increase Volume| Short Press – To navigate to Next track (in
BT/USB/HDMI ARC modes) Long Press – To increase the volume level (in all
modes)
3 •| Previous Track/ Decrease Volume| Short Press – To navigate to previous
track (In BT/USEUHDMI ARC modes) Long Press – To decrease the volume level (in
all modes)
LED display
Displays details of Mode input, Equalizer, Volume levels, Tracks, etc.
Details:
- Red LED: Standby mode
- 13T: In BT mode
- USB: In USB mode
- AUX: Auxiliary input mode
- OPT: Optical mode
- ARC: HDMI (ARC) mode
Connections
| # | Connection | Description |
|---|---|---|
| 1 | HDMI(ARC) | Enable to connect compatible devices using HDMI ARC cable |
| 2 | OPTICAL IN | Enable to connect compatible devices using an Optical cable |
| 3 | USB Port | Enable to connect a Pen drive for direct MP3ANAV playback |
| 4 | AUX IN | Enable to connect compatible devices using 3.5 mm AUX cable |
| 5 | Power Switch | Power On-Ot1 switch |
| 8 | AC IN | Use to connect the AC power cord |
Note: To prevent malfunction and/or damage to speakers or other devices. we recommend to always turn the volume doom and switch OFF all the power devices before making any connections.
Connect the Sound Bar
A. Power your system
D. Placement of Sound Bar & Sub-Woofer
a) On Table/ Flat Surface – Place the Sound Bar on the table/flat space.
– Keep the Sub-Woofer within the Sound Bar range.
– Do not place the Sub-woofer near any object. Recommend to maintain a
distance of 20 to 25 cm.
b) Wall Mounting Fix the screw on the wall with Wall-mounting brackets and
screw set provided. Hook the Sound Bar on the wall.
Remote Control
- Power/Stand-by: To switch between stand-by and operational mode
- Mute: To enable or disable volume mute of the system
- VOL +/-: To adjust volume level of the speaker system
- Play/Pause: In BT/USB/ HDMI(ARC) – To Play/Pause current track In AUX and Optical mode – As Volume Mute function
- Next Track/Previous Track: To select Previous/Next Track in BT/USB/HDMI ARC mode
- Mode: To navigate among various playback modes of Bluetooth, USB, AUX, Optical & HDMI(ARC)
- Repeat: To repeat One/All track in USB Mode
- BT: To directly go to Bluetooth Mode
- EQ: To select different equalizers – Music (EQ1), Movie (EQ2) and News (EQ3)
- BASS +/- : To adjust bass levels of the speaker system
- TREBLE +/-: To adjust treble levels of the speaker system
- 3D: To select 3D effect ON/OFF
Sub-woofer pairing with Sound Bar
User only needs to finish the first pairing connection between Sound Bar and
Subwoofer, after then every time you power ON the sound-bar it will reconnect
automatically in whatever mode.
– Switch on the Sound Bar and Sub-Woofer.
– LED Indicator on Sub-woofer will begin to flash and enable the mode of Sound
Bar to BT mode.
– Importantly note that – At this stage, please DO NOT connect any devices
(such as mobile phone, tablet) to Sound Bar.
– Hold the Play/Pause button more than 3 seconds and the LED display will
display “pair”. After successful pairing, Sound Bar will eject voice prompts
“du”. The first connection usually take around 10 seconds.
Dolby Sound
The effect of sound is only noticeable when play music or movie with Dolby
resources, especially when the 3D sound is turned on for the Dolby movie.
Modes
You can enjoy your music in the following ways i. BT ii. USB iii. Optical iv.
HDMI(ARC) v. AUX
i. BT – Press on the mode button till the voice prompt of the word “BT mode”
is heard.
– The LED screen highlights “BT” signifying that it is ready to pair a device.
– Make sure that Bluetooth is enabled on your device.
– Find the device list and select FINGERS Octane Dolby WL120. A sound prompt
of “Connected” is heard and it is ready to play.
ii. USB
– Insert the USB device (Pen Drive) in the provided port.
– Press the mode button till the voice prompt of the word “USB mode” is heard.
– You can then play your favourite tracks directly from the USB Disk.
iii. AUX
– If you wish to listen to music from mobile devices, plug in the AUX cable in
the AUX port.
– Press the mode button till the voice prompt of the word “AUX mode” is heard.
– You can then stream music directly from your mobile devices.
iv. Optical
– If you wish to listen to music from TV or other devices with Optical out,
plug in the Optical cable in the Optical port.
– Press the mode button till the voice prompt of the word “Optical mode” is
heard.
– You can then stream music directly from your devices.
v. HDMI (ARC)
– If you wish to listen to music from TV or other devices with HDMI ARC out,
plug in the HDMI ARC compatible cable in the HDMI(ARC) port.
– Press the “Mode symbol” button till the voice prompt of the word “HDMI mode”
is heard.
– You can then stream music directly from your TV.
Product Specifications it
| Parameters | Octane Dolby WL 120 |
|---|---|
| Wireless Protocol | Bluetooth v5.0 |
| Total Output Power | 120 W |
| Sound Bar | 15 W x 4 = 60 W + Sub-Woofer 60 W |
| Input Power | AC 110 ∼ 240 V |
| BT Supported profiles | A2DP, AVRCP, AVDTP, AVCTP, GAVDP |
| Driver unit | Sub-Woofer: 1 x 6.5″ (6 Ω) |
| Satellites | 4 x 2.25″ (4 Ω) |
| Playback Options | BT* I USB I AUX I Optical I HDMI ARC |
| BT Frequency Range | 2.402 GHz ∼ 2.480 GHz |
| Effective Range | Up to 10 m |
| Dimensions | Sub-Woofer: 300 x 200 x 300 mm |
| Sound Bar | 935 x 65 x 92 mm |
| Weight | Sub-Woofer: 4.0 kg |
| Sound Bar | 2.0 kg |
| Colors | Rich Black |
*When connected via BT Mode – you can move around and play music within a wireless range of up to 10 m, with audio fidelity keeping stable and intact throughout.
Ver.: 1.0.0
Stay connected with us
@fingers.co.in
@FingersIndia
@FingersIndia
Customer Service
• Support email:
customer.care@fingers.co.in
• 022-4938 7600: Mon – Fri (9.30 am to 6.30 pm) For further information,
please visit www.fingers.co.in
• Images shown may vary from actual product.
• Specifications, features and appearance are subject to change without
notice.
• All logos, brands, trademarks and product names are properties of their
respective owners.
• Product warranty is governed by warranty terms mentioned on
www.fingers.co.in
• This product falls under e-waste (Management & Handling) Rules, 2011.
For proper disposal method, visit our website
www.fingers.co.in
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>