one LIGHT 89009L DALI and Push to DIM LED Driver Instruction Manual

June 10, 2024
one LIGHT

one LIGHT 89009L DALI and Push to DIM LED Driver Instruction Manual

one LIGHT 89009L DALI and Push to DIM LED Driver Instruction
Manual

DALI Dimming wiring diagram

one LIGHT 89009L DALI and Push to DIM LED Driver - DALI Dimming wiring
diagram

Push to DIM wiring diagram

one LIGHT 89009L DALI and Push to DIM LED Driver - Push to DIM wiring
diagram

Specifications

one LIGHT 89009L DALI and Push to DIM LED Driver -
Specifications

Push to DIM wiring diagram

  • ON/OFF : short push.
  • Dimming : press and hold.
  • Dimming up or down : every time you press and hold, dimming changes direction.
  • Built-in memory : light returns to the previous dimming level when is switched OFF and ON again, even after power failure

Synchronization

Up to 64pcs LED drivers can be connected to the same push button. This means there is no need for any additional sync cables in large installations, where many drivers should be controlled by one push button. If more than one driver is connected to the same push button, in order to achieve synchronization, the following action is required: Switch off the light. Press and hold for more than 6 seconds.

Warnings :

  1. Mahe sure that the product is installed properly before connecting to electricity.
  2. Do not cover the fitting.
  3. Maintenance and installation should only be carried out by a professional electrician.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals