fingers QuickScan W5 Wired Barcode Reader User Guide
- June 10, 2024
- fingers
Table of Contents
QuickScan W5 Wired Barcode Reader
User Guide Quick Start Guide
QuickScan W5 Wired Barcode Reader
Important – Warnings and Safety Instructions
- Do not place the Barcode Scanners near the heat sources such as fire, radiators, stoves, light candles and other apparatus that produces heat.
- Use only those accessories supplied by Fingers.
- It is recommended to refer all servicing to qualified personnel. Servicing is required when the Barcode Scanner has been damaged in any way. Any evidence of any attempt to open and/or alter the device, including any scratch, peeling, puncturing, or removal of any of the labels, will void the Limited Warranty.
In the box
1 x QuickScan W5 Barcode Reader
1 x USB Cable
1 x Pin for Removing Cable
1 x Quick Start Guide
1 x Brand Note
Care and Maintenance
- Unplug the Barcode Scanner before cleaning it.
- Use soft, damp cloth to clean the surface.
- Do not use any chemicals, solvents, or cleaning solutions containing alcohol, ammonia or abrasives.
- Do not allow any liquid to enter into any of the openings.
Connecting the Scanner
Reading Techniques
- The viewfinder projects an aiming beam that should be centered over the barcode. However, it can be tilted at any angle and in any direction for an effective read.
- Hand hold the scanner over the barcode, pull the trigger and position the aiming beam on the barcode.
- The aiming beam is smaller when scanner is placed closer to the barcode and larger when it is farther from the code.
- Hold the scanner close to the smaller barcodes, and farther away from bigger barcodes to get a good read.
- If the barcode is highly reflective (ex. Laminated sheets, glossy), you might be required to position the scanner at an angle in such a way the barcode can be read and scanned clearly.
Standard Product Defaults
The following barcode resets all standard product default settings.
Please note that the default interface is USB-IHD. Example: Scan the Factory
Default, USB-IHD and add suffice “Enter” barcodes as below.
Scan Mode 
Auto-Induction
Buzzer
Image Inverted
Keyboard Language
Suffix Setting
USB-COM, RS 232 Baud Rate Setting
Barcode Setting 
General| Type:
Interface:
Indicators:
Operation Mode:
Barcode Type Support:| Wired
USB
Beeper, LED
Trigger
All Standard 1D Barcodes
---|---|---
Optical| Light Source:
Scan Rate:
Resolution:
Print Contrast Ratio:
Depth of Field:| 650 nm visible laser diode
300 scans/sec
4 mil
35% @ UPC/EAN,100%
0-250 mm
Electrical| Input Voltage:
Working Current:
Standby
Current:
Sleep Mode:| 5 V ± 1%
85 mA
36 mA
Physical| Housing Material:
Cable Type:
Dimensions:
Weight:
Colour:| ABS+PC
USB (2 meters)
17.2 (H) x 8.3 (W) x 7 (L) cm
205 grams
Black
Environment & Safety
Conformance| Operating Temperature:
Storage Temperature:
Operating Humidity:
Shock Resistance:| 0°C — 50°C
-26°C — 60°C
5% — 85% RH (Non-condensing)
3.0 m drops
fingers.co.in
Ver.: 1 .0.2
Images shown may vary from actual product.
Specifications, features and appearance are subject to change without notice.
All logos, brands, trademarks and product names are properties of their
respective owners.
Product warranty is governed by warranty terms mentioned on
www.fingers.co.in
This product falls under e-waste (Management & Handling) Rules, 2011.
For proper disposal method, visit our website
www.fingers.co.in