QCen ECO Low Consumption Electric Heater User Manual

QCen ECO Low Consumption Electric Heater

READ AND SAVE THE USER MANUAL
Please read carefulty before attempting to assemble.Install, operate or maintain rhe product CMKribed.Protect yourself and others by reading al safety lnfonnatiOn.PloaH retain instructions for future refereooe.

IMPORTANT SAFETY INSTRUCTIONS

PRECAUTIONS FDR USE

• The heater may onty be used In the l’IOuMhOlcl for the purposes <IMeribed In these operating instructions.
• CIOM 8UP8Msi0n IS required when Chil<lr$n come r or opett1te the hffter. Children should be supervised to ensure they do not play with the heater.
• Always remove the plug from the socket before cleaning. repairing or servicing the device, orwheo it is not in use.
• To avoid burns. a POWER INTERRUPT PROTECTION wiN activate if the bottom of the heater and the ground are not In a horizontal line.
• To 8vokl bums, you should ensure that your bare 5kirl do&& not come into cootaa with hot surface&. Always use the handle when moving the heate,.
• Keep the device at least 100 cm away from flammable objects such as paper, fabrics or curtains and leave sul’flcient space (120 an) around the device.
• DO NOT use the heater in areas where gasoline, paite, or combustible materials are used “‘”°””‘·
• NOT use the heater in locations where narnmat,te or exploslve chemicals are stored.
• NOT insert fingora or foreign oqocts into tho voot or e,.;haust openings as lhis may result in electric shock, fire Of damage to the heater.

ELECTRICAL SAFETY PRECAUTIONS

• Be sure the power M)uf()EI meets the I requirements for the heater, which must be powered from a professionally installed ootlet of the correct voltage.
• DO NOT operate the heater if the powe, cord or IS damaged. The replacement must be canied out by a professional.
• DO NOT uso an e:ictonsion cord or adapter plug
• DO NOT remove any prongs from the powe.-cord.
• DO NOT pull the plug by the cord.

HEATER PLACEMENT PRECAUTIONS

• Afwa’JS  and use the heater on a dry, stable, le’lel and horizontal surface.
• Make sure that the de’lice cannot be easily knocked 0\181′ by a person or an cqect.
• Keep the cable away from high-traffic areas and make sure that nobocty can trip over it.
• To avoid !he ris.l< of fire, NEVER n.in the cord unoor furniture.
• The hoator is not intooclod lo be storod in a wo1 or damp condition. DO NOT place lho heater where it could fall into water.
• DO NOT slore or use gasoline or othef flammable vapors or liquids near lhls Of any otherde’lice.
• DO NOT plao& the heat8f directty on or againsl soft fumi&hlngs SUCh 8$ bedding or CUttain5 as thlS could cause the heater to blod( the air Inlet Of outlet.
• DO NOT plaoo any objocts on top of tho heator.
• DO NOT use the heatef outdoofs. This heater is not suitable fOf use in farm lacilitle$, lnctuding areas where livestod<., poultry or other animals are confined.

Specification

Installation Instructions

Assembly

• Make sure that the two parts of the base be stuck ifl the rlghl position, which take CIA from the package
• 8ockle tho OOse in the direction of the a/TO\liS Etnd tighWO thorn
• Remove 3 :screws and a pad from main part
• Attach the base lo main part In the correct direction , and finally tighten them by SCfOWland pad.

Appearance:

USING YOUR HEATER

Touch Control

• Press the POW8f button to \um the Heater ON.Toe Heater wiN tum on in ‘Low Hear mode,wnlle: room ternperaltu Is displayed on the digital screen.PrHS the Power button again to tum the Heater OFF.
• The ‘HEArbutton controls the current Heat Mode.Press the button once for’Low Hear Mode.Press the button twice for’Hlgh Heal’ Mode.Press the button third for Wind’ Mode. Threa modes ‘Mil change successively.
• Press the Swing Modo button to bogin oscillation. Pross tho Swing Modo button again to stop oscillation.
• Timer Mode allows you to set up the length of time.Pressing the Timer button,the digital screen will displayOH’and each pressing wil increase the length of tima from 1 to 12 hours. in 1 increm6flts.After setting time, the number on sc.reeo wil flash for three seconds. Then the SCr8efl wiN come back to display leITl)&rature, which means the selling is suocessful.
• The default temperature Is 23 t:, temperature Increases 1 t: by ooe pressing IXIIM 40·c. The tempenuure changes 20-40-20 t In cydt. The digiUII S¢r6ef1 flashes for 5 &eOOnds to ltdopt new setting, and the digital di:splay jumps back to room lomperature display after setting.The Automatic Thermostat Control allows the heater to shut off once lhe room tMChes the desired tempetture. Press the TEMP buttoi,s to Increase 0t decrease lhe preferred room temperature. After a few seconds, the heater will dtsplay the current temperature.

Remote Control

All tho functions polformod with tho Romoto Control work idonlically lo the Touch Control.Please remove the insulating laye< befOfe use. The batt&f)’ isincluded inside.

CLEANING & MAINTENANCE

• Unplug the power and wail until the pnxluc:1 0004$ down before mainteMnoe.
• Please use the clean and soft doth or with neutral solvent to clean the product.
• DO NOT use OOfl’OSM!I or alkaline solvenl lo clean this product.
• DO NOT clean the In of this prodUct(drcull board, molOt, ect.) with any sotvent. In case of short drcuh.
• Please up this product proper1y fOf storage if this pl’Oducc Is not used tor a long period of lime.

TROUBLESHOOTING

Tho IOllowing troubleshooting guide (ISS-OS !he mo&t common P’Oblom& If problems persist, please fool free to contact OIJf Customer Service.

Q1: Elelric Heater does not operate?
A 1: Make sure the Elebic Heater is connected to a powered electrical outlet

Q2: Noise wfMkl the heater Is working?
A2: Air movement sound. This is nonnative. If too loud, set lo lower fan setting. Vibration from the uneven floor. Place the unit on a firm and II.at floor.

Q3: Not hot enough?
A3: The doors and window$ .ite not & Sled.A large quantity of cold .iir 6f1teri the room continuously.Seal the door$ and windows well. Set to a higher temperature

Q4: The product only comes out with oold air and does not heal up?
A4: Please check if the air iolet and outlet are blod!.ed (e.g. curtains, plastic bags, pieces of paper, etc.) and lhen wail for the product lo cool down before switching it on again.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>