Xtorm XB401 Power Bank Titan Instruction Manual

Xtorm XB401 Power Bank Titan

Product Information

• Capacity: 24,000 mAh Li-ion / 88.8Wh
• Outputs: 1x USB-C Power Delivery 60W, 2x USB-C Power Delivery 30W
• Dimensions: 185x90x25 mm
• Weight: 558 grams
• Built-in USB-C Power Delivery 60W cable
• LED power indicator
• Low battery warning light

Product Usage Instructions

1. Connect one end of the charging cable to one of the outputs of the Power Bank and the other end to the input of your device.
2. For charging USB-C Ultrabooks, use output 1 (USB-C PD 60W).
3. To check the remaining battery level of the Power Bank, press the power button once. The LED display will show the battery percentage between 0% (empty) and 100% (fully charged).
4. To recharge the Power Bank, connect one end of the built-in charging cable to output 1 of the Power Bank and the other end to a wall charger.
5. The charging icon will flash when the Power Bank itself is being recharged.
6. The low battery warning light (battery icon starts blinking faster) occurs when charging a device and the battery level of the Power Bank goes below 5%.

SPECIFICATIONS

• 24.000 mAh Li-ion / 88.8Wh
• 1x USB-C Power Delivery 60W 2x USB-C Power Delivery 30W
• 185x90x25 mm
• 558 grams
• 1x Built-in USB-C Power Delivery 60W cable 1x Manual

When using multiple outputs

• When using 2 outputs (1) 60W (2)/(3) 30W
• When using all outputs 60W (2)(3) Share 20W

PRODUCT OVERVIEW

1. In/Output USB-C PD 60W
2. USB-C PD 30W
3. USB-C PD 30W
4. Power Button
5. LED Power Indicator
6. Built-in USB-C PD Cable
7. Official Xtorm Label

CHARGING YOUR DEVICE

• 4A Connect one end of the built-in charging cable to output 1 of the Power Bank and the other end to a wall charger.
• 4B For the fastest charging possible use a 60W USB-C PD charger. This will fully recharge the Power Bank within 2 hours.

RECHARGING THE POWER BANK

• 4A Connect one end of the built-in charging cable to output 1 of the Power Bank and the other end to a wall charger.
• 4B For the fastest charging possible use a 60W USB-C PD charger. This will fully recharge the Power Bank within 2 hours.

LED POWER INDICATOR

• 5A Press the Power Button once to display the battery level remaining in the Power Bank via the LED display. Improved power button function:
  • single press to turn on/off the diplay
  • double press to fully turn on/off the powerbank
• 5B The display shows the remaining battery percentage between 0% (empty) and 100% (fully charged).

IN THE BOX

• 5C The charging icon will flash when the Power Bank itself is being recharged.
• 5D Low Battery Warning Light (battery icon starts blinking faster), occurs when charging a device and the battery level of the powerbank goes below 5%

1. XB401 Titan Power Bank
2. Built-in USB-C PD 60W cable
3. Manual

• 3.A Connect one end of the charging cable to one of the outputs of the Power Bank and the other end to the input of your device.
• 3.B For Charging USB-C Ultrabooks use output 1 (USB-C PD 60W).

RECHARGING THE POWER BANK

• 4.A Connect one end of the built-in charging cable to output 1 of the Power Bank and the other end to a wall charger.
• 4.B For the fastest charging possible use a 60W USB-C PD charger. This will fully recharge the Power Bank within 2-3 hours.

LED POWER INDICATOR

• 5.A Press the Power Button once to display the battery level remaining in the Power Bank via the LED display. Improved powerbutton function:
  • single press to turn on/off the diplay
  • double press to fully turn on/off the powerbank
• 5.B The display shows the remaining battery percentage between 0% (empty) and 100% (fully charged).
• 5.C The charging icon will flash when the Power Bank itself is being recharged.
• 5D Low Battery Warning Light (battery icon starts blinking faster), occurs when charging a device and the battery level of the powerbank goes below 5%

RECYCLING

• When recycling this product, please follow WEEE battery recycling procedures. Contact your local recycling organization for more information.

XTORM SAFETY CHECK

1. TEMPERATURE CONTROL
   Provided with a temperature control chip that prevents overheating.

2. OVERLOAD PROTECTION
   Protects both the internal battery as well as the battery of the attached device from overcharging.

3. SECURED POWER MANAGEMENT
   Automatically picks the correct charging speed and efficiently devides power between attached devices.

4. SHORT CIRCUIT PROTECTION
   Breaks the circuit automatically when an overcurrent is detected. This protects the Xtorm charger and your device from short circuit damage.

5. A-CLASS BATTERY CELLS
   We only use the best battery cells that provide the fast charging you need and meet all safety requirements.

6. HIGH EFFICIENCY
   Our power products are built to power your device as efficiently as possible. This ensures the least possible loss of energy during the charging process.

Warnings
Don’t drop, disassemble or attempt to repair the charger by yourself. Avoid exposure to water or high humidity. Don’t expose to any heat source. Keep out of reach of children. Don’t use in the presence of flammable gas. The warranty will lapse in the event of improper use. Telco Accessories has tested the product in a test environment. All statements/declarations made by Telco Accessories about the (operation) of the product are based on the results obtained from such tests. These results/statements/declarations cannot be guaranteed, for example in cases of deviating or injudicious use and/or use in a different environment.

CUSTOMER SUPPORT
support@tag.nl +31 (0)30 635 4800 TELCO ACCESSORIES GROUP Hoofdveste 19, 3992DH Houten The Netherlands

References

• Xtorm | | Power Banks | Solar Chargers | Power Stations – Xtorm EU

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>