muvit iO Smart True Wireless ENC/ANC Earbuds User Manual

muvit iO Smart True Wireless ENC/ANC Earbuds

Introduction

Thank you for purchasing the True Wireless urban earphones with noise cancelling (ANC) model MIOSTW005. Our goal is to provide our customers with quality products to build a more comfortable and better life. We hope you enjoy your new product.

SECURITY RECOMMENDATIONS

Important

Please read the instructions and comply with all requirements and warnings provided in the manual before using the product. Failure to comply with the warnings and instructions may result in misuse of the device putting the product at risk.

Warnings

Do not expose the earphones or charging base to excessive heat.
Do not immerse the product in liquids. If the product is damaged when unpacked, please request an exchange at the place of purchase. Before installing the product, make sure that it is in perfect condition.
Do not handle or subject the product to external forces.
This product should be stored in cool places and should not be exposed to fire.
Electrical and electronic equipment should be disposed of at the points specially designated by local authorities for proper recycling.

TECHNICAL SPECIFICATIONS

• Modes: ANC + ENC
• Bluetooth version: V5.3+BR+EDR+BLE
• Bluetooth decoding: SBC, AAC
• Bluetooth working frequency: 2.402GHz-2.480GHz
• Frequency response: 20Hz-20KHz
• Speaker size: 13mm
• Sensitivity: 118dB ±1.5dB S.P.L at 1KHz
• Speaker impedance: 32Ω±15% at 1mW / 1000Hz
• Microphone specifications: 2718
• Microphone sensitivity: -42±1dB
• Headset battery capacity: 50mAh
• Housing battery capacity: 400mAh
• Battery life: Playback: 10 hours / Talk time: Up to 9 hours

BASIC FUNCTIONS OF THE TRUE WIRELESS EARPHONES

Power on/ power off

Remove the earphones from the charging case and they will turn on automatically; if you put the earphones back into the charging case, they will turn off automatically.
Long press for 3 seconds to turn on the earphones. Long press for 5 seconds to turn them off.

Play music / pause music

While listening to music:
Press either earphone once to play or pause the music.

Next track / previous track

While listening to music:
Quickly press the left earphone twice to go to the previous song.
Quickly press the right earphone twice to listen to the next song.

ANC Mode

The earphones are originally set to Bluetooth mode. If you wish to change the mode, follow the instructions below:
Transparency mode: long press the right earpiece for 2 seconds to switch to Transparency mode.
Noise cancelling mode (ANC): press the right earpiece again for 2 seconds to switch to Noise Reduction mode.
Bluetooth mode: press the right earpiece once more for 2 seconds to switch to Bluetooth mode.

Answer a call / end a call

When an incoming call occurs:
Press the left or right earphone to answer a call.
Press again the left or right earphone to end a call.

Voice assistants
Quickly press the left or right earphone 3 times to
activate the voice assistant.

Charging function

Fully charge the case and earphones before using them for the first time.
Do not use an adapter of more than 5V to charge this item.

PAIRING

Automatic pairing

The first time they are connected by removing the earphones from the charging case, the earphones will automatically turn on, sync and enter pairing mode.
To reset the earphones and put them into pairing mode, you need to remove them from the charging case, click 5 times on both earphones at the same time and put them back in the case; then close and open the lid, remove the earphones and they are ready to be paired again.

Synchronization of the earphones

When the earphones do not synchronize with each other or go into a disconnected state during use:

• Turn both earphones off and then on again.
• If this does not work, put both earphones back in the case, close it and open it again.
• With the earphones out of the charging case, press and hold the two buttons on the headphones for 3 seconds. This will force the headphones to turn off and on again and sync with each other.

Open the Bluetooth settings on your Smart device and search for the

earphones named “G60 ANC”.

USE OF THE APPLICATION

Download the “muvit iO Home” application.

To download the app, you can scan the QR code below.
You can also search for “muvit iO Home” in the App Store or Google Play.

|
---|---
|

Register

If you do not have an account, you will have to create it from the application itself. Open the app, click on “Create account”, the system automatically recognizes your country, if it is not the correct one, please modify it.

Enter your email address and click on “Get verification  code”, after a few seconds you will receive an email at the same address with a 6-digit PIN code. Copy it and then you will have to enter a password of 6 to 20 characters to create the account; then click on “Save” to complete the registration.

Add device

Bluetooth connection (recommended):

Activate Bluetooth and Location on the phone. Once the application is open, press “+” or “Add device”, if the earphones are flashing, a screen will appear informing you that a new device has been detected. Select “Add”, press “+” and after a few seconds press “Save” to finish.

Note: due to possible updates of the application, the installation process of the product may undergo changes. Please follow the instructions in the App itself for a correct installation.

Device control

After successfully configuring the device, it will be displayed on the “Devices” page. Click on the device icon to use the different headphone functions such as selecting the equalizer type, editing the name or headphone search*.

TROUBLESHOOTING AND/OR FREQUENTLY ASKED QUESTIONS

What should I do if the earphones do not connect to the phone via

Bluetooth?

• Check that the earphones are turned on.
• Check that the phone’s Bluetooth is not connected to another device, turn the phone’s Bluetooth off and on.
• Reset the earphones by following these instructions:
• Remove the earphones from the charging case, click both earphones 5 times at the same time and put them back in the case. Close and open the lid, remove the earphones and they are ready to be paired again.

What should I do if the application does not recognize the earphones?

• Check that the earphones are turned on.
• Check that the phone’s Bluetooth is not connected to another device, turn the phone’s Bluetooth off and on.
• Reset the earphones by following these instructions:
• Remove the earphones from the charging case, click both earphones 5 times at the same time and put them back in the case. Close and open the lid, remove the earphones and they are ready to be paired again.
• Go to “3. Add device” and follow the instructions  to do the installation in the App.

WARRANTY & TECHNICAL ASSISTANCE SERVICE

Terms and Conditions

Innov8 Iberia guarantees the hardware and software* included in this product for the term of three (3) years in all its parts, against any defect of manufacture and operation from the date of delivery to the final consumer and without any cost for this one.

To make this warranty effective, no further requirements should be demanded than the shipment of this product together with this warranty and the invoice or proof of purchase.

The warranty may be claimed at the place of purchase.

*Warranty on software applicable to the software that contains the physical product, not on the control application (App) within the consumer’s mobile devices.

This warranty shall not be valid in the following cases:

When the details on the warranty or proof of purchase do not match the product.

When the product has been used in other than normal conditions or if it is used in disregard of the instruction manual accompanying this warranty document.

When the product has been opened or altered by unauthorized personnel.

DECLARACIÓN DE CONFORMIDAD SIMPLIFICADA

Under the present document, innov8 Iberia S.L.
declares that the type of radio equipment, true wireless earphones model MIOSTW005, are in conformity with the EMC (2014/30/EU) on Electromagnetic Compatibility, LVD (2014/35/EU) on Low Voltage, RED (2014/53/EU) on Radio Equipment, and RoHS (2011/65/ EU) on the use of certain hazardous substances in electrical and electronic equipment.

The full text of the EU declaration of conformity is available on the following website:

https://media.innov8iberia.com/DDC/MIOSTW005/DOC_MIOSTW005_EN.pdf

Product distributed by:
Ascended France
Address: 61, rue Emile Zola 69150 Decines-Charpieu.

After-sales service:
Email:[email protected]

Environmental care and waste disposal:

Electrical and electronic equipment (EEE) and batteries contain materials, components and substances that can be hazardous to humans and the environment, when waste disposal is not carried out correctly.

Both electrical and electronic equipment and batteries must be marked with this symbol, which means that these products cannot be disposed of together with normal household waste, but must be separated.

To this end, all cities have set up collection systems where the disposal of electrical and electronic equipment and batteries can be handed in free of charge at the local recycling station or other collection system. For more information, please contact your local technical department.

References

• demais.Com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>